pakfiefer body kit-(group buy) Options

[madmods]

The new kit is distributed through the north maerica distributor located in Canada.
I pulled the info from:
http://www.pakfeifer.at/mainenglish.htm
The saleguys name is Oscar, he seems to be quite legit, and he speaks perfect English, and know his product. His number is 416-899-5909
He says he can lower the price for a group buy. I really like his kit, and according to him there are metal mounting brackets glasses into the kit to make installation easier and more secure+++++!

Anybody interested in a group buy?

[Uppitycracker]

[brianforster]

the only kit i see is for a 5gen celi?

[brianforster]

nevermind i Found the other kit

[FAQdaWorld]

OMG, if there is a group buy on this i want in!



-Ryan

[Akimbo]

I'd take the front and skirts..maybe the wing, and I'd make a carbon fiber overlay for the center peice.

[Guest_DJMC_Celica_*]

How much for just the hood???

[Digndoug]

humm.. kinda ugly.... but what ever floats your boat

[3FingersCelica]

I just want the side skirts

[spikeygq]

wow i like the kit except the rear bumper....

[turboinduction]

Hey Madmods - I'm in... i didn't know pakfiefer made this kit and i'm already planning on dealing with them on my new (soon) mx-3. Its gonna be my ultimate sleeper - jdm 200hp

Price???

[Raek]

is there a difference between JDM 200hp and USDM 200hp?

i didn't know japan made their own horsepower...

[turboinduction]

think before you type-

the mx3 v6 1.8 came with 130 hp, whereas the JDM! mx6 2.5 engine came with 200 hp. that engine would be a great sleeper in a mx3. good try.

and back to the bodykit... the more i see it the more i love it. just need a price.

[Consynx]

heh, nah...he was thinking allright i'd say
if the JDM MX3 was the 2.5L engine, then i could see where you King Kong'd him and conquered the post...

Anyways, Good Luck with the kit guys

[turboinduction]

Re-read, jdm mx6 not 3. The JDM mx6 bolts just like the gt4 does to the usdmGT.
This engine swap is very common to the mx3 and is what i meant in saying "jdm200." Of course, this is a toyota site and i shouldn't assume everyone knows googles about mazda.
But should i be pounding my chest now? I'm just havn' fun now...dont worry.
I'll stop talking about my mazda now - Go celica woot

This post has been edited by turboinduction: Mar 31, 2004 - 11:39 AM

[madmods]

prices are there on the website. I was quoted 120 for shipping the spoiler, 180 for the whole kit. Shipping price is average, the kit is priced high though. Oscar said he would drop prices if we did a group buy.

[Uppitycracker]

[FAQdaWorld]

Could we do a group buy and just buy the parts of the kit that we want? For example I'd prolly just want the hood, skirts, and iono what else. We would have to buy the whole kit I mean?


-Ryan

[turboinduction]

"Its not a sleeper if the car doesnt look stock on the outside! I was going to do that swap aswell with my old mx-3, its pretty cheap and lots of gains."

I agree, but even still - no one expects a mx3 to be that powerful, bodykit or not.
I do the swap as soon as i can stop spending money on the celica, expect details somewhere in the year 2006 - lol

as for the kit - I want the whole damn thing

[Uppitycracker]

[brianforster]

the sides look pretty sweet

kinda reminds me of the 3000gt sides

[Phat_Boi]

Dude, if we could get a GB in one this kit I would buy it. I think the kit looks badass, and since I might be getting another Celica soon I'm in, as long as it isn't overly expensive.

[rza619]

count me in but wheres the link with the 6 gc celica with the kit?

[Mousetrashdiver]

[Guest_DJMC_Celica_*]

[Uppitycracker]

[madmods]

Im sure Oscar don't care what items you buy as opposed to buying the whole kit. I am going to invite him here on the forum so we can get this started. I need my kit now! Oscar is the North American distribtor for the kit for you that dont know. Everything will run through him and not me. I have posted his number on this thread in a earlier posting.

[pakfeifer]

[Uppitycracker]

[pakfeifer]

Hey, nice to hear from you again. I just turboed my kl03. Good enough for now ! I was thinking of putting in the ZE cams, but it turned out to be too much hassle with these motors, so I said f--- it.

Thanks for backing me up! I will do everything within my control to satisfy everyone, all i ask is for patience when the ball gets rolling. These things do take time, especially when dealing with bulk orders.

I currently have a few GB's going on in www.toyotanation.com and also www.mx-3.com for Carbon Fiber hoods and trunks.

Yes we do custom C.F parts if anyone is interested...

If Anyone needs more background info on myself, don't hesitate to look around and ask the webmasters at either site otr contact me for references!

Thanks again

[pakfeifer]

um.... whats that warn 0% thingy under my info?? I have never seen that before

[turboinduction]

hey oscar. Dont worry about the warn thing, its nothing. I'm Morgan you spoke to yesterday. The number is 715-207-9732. Sorry if I mixed numbers up, i have about 13 of them with being a salesman. You should know the feeling. lol. So prices should be about 20% if we get the whole it. That doesn't sound to bad. I'll have to price it out and find out how poor i'll be for the next couple months.

Edit: I just totaled it up. Should be 2000 shipped for everything (hood w/ scoop, front bumper with lights, side skirts, rear bumper, and spoiler). Am I correct in this? Thats actually not a bad price if we dont have to fabricate any of it.

morgan's wallet:
-2000 kit
-1800 rims
-1500 install and paint job
-5000 engine swap
_____
-10300 AHHH

All for the attention of every girl alive - priceless

This post has been edited by turboinduction: Apr 2, 2004 - 11:30 AM

[pakfeifer]

Hey Guys,

I'll probably be able to do better with the shipping price, I would have to see at the time of order, but potentially were looking at $180 for a complete kit as supposed to $225. For one item alone, it would remain the same price of $100. remember, there might be a duty and brokerage fee once it hits the U.S. That is the control of your government. As I said, we can fix the invoice so that the declared value is lower and therefore saving you a little more money.

Morgan, yes you are correct, you are looking at about $2,000 for everything(front, rear, sides, hood and spoiler including shipping to your city)

Absolutely no fabricating is necessay, that is a guarantee! It is a straight bolt up. Just like factory. I will refund you 100% if this is not the case.

so what does eveyone else think? Let me know your opinions, ideas and any comments.

Thanks

This post has been edited by pakfeifer: Apr 3, 2004 - 2:41 PM

[Uppitycracker]

Hey sorry to hijack the thread again but how bout a link to your turbo vid?? I checked out mx-3.com but i couldn't find anytihng there.

[FAQdaWorld]

I'd like to see the vid too....



What is meant by air intake not for gt-four? Does that mean a non functional bonnet scoop? Or is that in reference to an intake system to go w/ the hood?


-Ryan

[pakfeifer]

hehehe. I need someone to post it here. I can email it to them

Its a very small clip w/o sound. It was recored with a digi and it was only a 2.0 meapixel camera.

Ill be up again in London soon to finally pick up the car and drive it back home. It needs to be tested well before I start driving it for 2 hours back to Toronto.

Email me at oscardevesa@sympatico.ca and i'll forward you the clip to upload the thread.

[pakfeifer]

[pakfeifer]

[Uppitycracker]

[pakfeifer]

hehehe, its funny seeing my car in a Celica forum..

Anywho, Just to get an idea of the interest; can whomever is still looking at getting in on this deal please post just to give me a rough estimate as to what this GB will consist of?

It seems that some of you were pretty interested, but i have not seen any recent related replies.

Are you guys that posted in the past still interested?

[FAQdaWorld]

I think i'll be in for some side skirts

-Ryan

[playr158]

i'll probably be down for a rear bumper considering i just got rearended

so lets see
rear bumper-448
15% discount?!?!-441.28$
shipping-100??

total 541.28?!?!

[pakfeifer]

[madmods]

Thank you Oscar(pakfeifer canada)for posting exact prices. I am presently saving for your kit, and it might be next week for me. How are you taking payments? Are you on paypal? Thanks Madmods

[pakfeifer]

I do take paypal, but usually I reserve that for small orders such as taillights and fog lights. On bigger orders such as this, I would have to refuse the option of paypal. They take quite a bit between transaction fees and exchange rates.

I do accept mastercard and Visa. If you preffer, we also accept money orders and certified cheques.

Thanks

[playr158]

wow oscar thanks for the price help i don't know what i did, damn i would payed what i came up with but i like your figure much more, i'll be looking into finalizing the order in the next month

[pakfeifer]

[turboinduction]

hey oscar-
count me in within the month. i should start to work on my body before mid-may, so i'm expecting to purchase around then. thx for the prices.
-morgan

[madmods]

Placed my order today for my rear end and side skirts!

[nik]

ordering rear bumper today

[pakfeifer]

So far I have received the following orders:

madmods: rear/sides w/aluminum mesh grill
NIK: rear w/ aluminum mesh grill

The order will most likely be shiped out from Austria by the 23 of April or so. I will process the payments most likely next week when i receive a confirmation some point during next week to ensure all parts are in stock.

Anyone else interested in ordering and receiving their goods asap would want to consider including it within this shipment as importing usually takes a long time. The next shipment would propably be another three weeks away pushing that date to mid May.

For those that have issues coming up with the total amount, please contact me in private as I will definately work out something to meet your budget.

I would much rather have a full shipment arrive with goods instead of a partially packed shipment. It would also be efficient; those that couldnt pay all at once would be quaranteed the part in stock here in Toronto and ready for shipment sooner rather than having to wait until the next shipment arriving.


turboinduction:

for example, if you were to order in mid May, you are looking at 3 weeks from that date which pushes it back to the first or second week of June.

Perhaps something to consider.

Thanks for your time and have a happy weekend!

Happy Easter!

[kamax]

i was wondering if this was a one time thing or can i contact you in the future and order some parts?

[pakfeifer]

[pakfeifer]

TTT

[snadman]

On the topic of that swap...I swapped the JDM KL-ZE in my parents' 96 mazda 626 in replacement of the USDM KL-03 which I blew up. Man that car is smokin fast...I killed an Audi TT in it and a Lexus SC300.

[pakfeifer]

I believe it!

I dust 5.0 litre mustangs like they are standing still.

Its actually quite funny, they see this girly mx-3 line it up and give you the pitty look. I simply return that look.

Boy are they sucks! One guy purposely pulled over to the shoulder to avoid pulling up beside me at the next red light.

I do not promote illegal street racing, this was done ....um somewhere legally with traffic lights

[pakfeifer]

I also forgot to mention, we carry the Veilside complete kit for the Celica!
Unfortunately not uploaded to my webpage as of yet!

[jpodstawa]

Depending on the price.......I'd be in for a group buy!

Jason

[turboinduction]

he already posted prices, back-read some of the posts.

and oscar - you can really dust 5.0's with a stock KLZE??? Any upgrades to it. Hell i was planning on have a turbo ZE in a Mx3. And of course LSD from the Mx6 to keep the car on the ground.

[pakfeifer]

In terms of the Veilside kit:

Front: $325 U.S + $65 U.S (shipping) = $390 U.S

Rear: $325 U.S + $65 U.S (shipping) = $390 U.S

Sides: $275 U.S + $35 U.S (shipping) = $310 U.S

Complete Kit (Front, Rear, Sides): $850 U.S + $150 (shipping) = $1,000 U.S

I may be able to play with these figures a bit more depending on volume of course.

For those that have ordered already, I am waiting on confirmation from my warehouse in Austria of the status of parts in inventory.

I will call you before charging your accounts!

[pakfeifer]

[3TST]

I'm curious...
Are you able to offer the discounted prices to anyone (I'm in France)?
Can the items be shipped directly to France from Austria?
If so, any idea on shipping?
I'd be interested to see if something could be worked out.
Cheers.

[FAQdaWorld]

I'm not gonna have the cash available for this for quite sometime, prolly not till end of summer or maybe even later, sorry

[pakfeifer]

[3TST]

[pakfeifer]

[nik]

so whats the update on the bumper Oscar? do you know when about it will be sent?