z-glide/type z/404 frnont lip question, Where do the screw go? Options

[Rjb23]

I have a z-glide front lip I am planning on putting on my car this summer, and I was just wondering where you guys bolted yours in at? I plan on putting a couple in the wheel wells, but what about in the front. Pics of bolt positions would be appreciated if anyone has them.

[Rjb23]

anyone?

[Phat_99CeliGT]

i just had 2 screws in the wheel wells for the front and 2 screws in the wheelwell for the rear, with a bolt in the middle inside of the rear lip.

[Rjb23]

So only 2 bolts in the wheel well for the front, none in the front bumper cover?

My back lip is molded on so I don't have to worry about that one, but thanks anyway.

[Phat_99CeliGT]

none in the bumper.
the lip has a "lip" on it, so when u bolt it on the sides, it kinda holds itself up on the bumper.

if u r unsure about it staying on, get some 3m double side molding tape.
put a strip of it on the inside lip where it rests on the bumper.

[Rjb23]

Well, I'm not really worried about it staying on. Just bouncing up and down, the roads here have really started to suck lately.

Another question what kind of screws did you use, just self tapping screws or did you use a bolt and nut?

[Phat_99CeliGT]

i just used some self tappers