Photoshop a new project please! Options

[madmods]

Can someone change the top piece color from black to white so i can see if this projects is worth doing. The top piece is a vader, and the bottom is a 7th generation celica vielside.

[DamDirtyApes]

if u changed around that middle vent between the headlights , proberly make it wider ... ur car would look so kickass


pls make that bumper, it would look so increidbly bad ass words couldent describe it.

[madmods]

I suck at photoshop, but am going to take a class in it. Funny, because I graduated from devry. oh well. heres a cheap rendition. Vent can stay or go. Your opinions please?

[Coomer]

I'd get rid of the vent, or go with a GT-Four-style vent if it were my car.

[madmods]

Heres the same top piece with a razzi tiburon bottom. Dp you guys like this better?

[Coomer]

I prefer the Veilside kit for the seventh gen.

[WannabeGT4]

modified C-One
Sure it isn't quite as unique but it's so damn sexy!
(at least loose that front vent)


This post has been edited by WannabeGT4: Dec 29, 2004 - 12:18 AM

[redtcel]

the tibby aint bad me likey.

[vangSTa_celica]

I like the 7th Gen Veilside. Here's my attempt in MSPAINT since I don't have that photoshop stuff:



By the way, this is Lar's car.

[doGGy]

all the way with 7g veilside, it looks so good.. but lose that vent, and instead of it go with gt4 like vent..

it will look so badass for sure..

P.S. Madmods, did i set you on fire?



This post has been edited by doGGy: Dec 29, 2004 - 1:17 AM

[turboinduction]

I like what vansta made, that would be sweet

-Ti

[dannesweden]

I photoshopped the first one for ya, I will have it in my lobby at cardomain for a couple of days check it out.
I'm at my parents house so i'll have it there until i get home after new year, then i can paste it on this page with my own computer. Maybe I can fix the second bumper to. Did it pretty fast but it looks okay, enjoy.

http://www.cardomain.com/memberpage/757091

This post has been edited by dannesweden: Dec 29, 2004 - 10:22 AM

[Fietsbel]

Here is the other one

[playr158]

oooooo hot

[madmods]

I photoshopped the first one for ya, I will have it in my lobby at cardomain for a couple of days check it out.
I'm at my parents house so i'll have it there until i get home after new year, then i can paste it on this page with my own computer. Maybe I can fix the second bumper to. Did it pretty fast but it looks okay, enjoy.

http://www.cardomain.com/memberpage/757091
[right][snapback]227708[/snapback][/right]

Thanks Dannesweden, Im posting your photo here. today, i am sanding the edges straight, so I can start glassing tonite. I am pretty much using the techniques neverstop used, when he made his front end. I am also installing 7th gen vielside sidekirts which I already cut some of the sides off to make them fit. I also got to cut the ends off to shorten them about 1 inch. The vent, I dont like, so I might not add it on. I dont want to use the gt4 vent either. I want something completely different but cool. I got to look at some concept cars. If you have any ideals please post your pictures here.

[doGGy]

Try to make some sort of RSX veilside vent.. look for the RSX Veilside bodykit, it look really god, and i like the idea of the VENT on this bodykit.. Maybe it will give you a start on somthing you work out..

I photoshopped the first one for ya, I will have it in my lobby at cardomain for a couple of days check it out.
I'm at my parents house so i'll have it there until i get home after new year, then i can paste it on this page with my own computer. Maybe I can fix the second bumper to. Did it pretty fast but it looks okay, enjoy.

http://www.cardomain.com/memberpage/757091
[right][snapback]227708[/snapback][/right]

Thanks Dannesweden, Im posting your photo here. today, i am sanding the edges straight, so I can start glassing tonite. I am pretty much using the techniques neverstop used, when he made his front end. I am also installing 7th gen vielside sidekirts which I already cut some of the sides off to make them fit. I also got to cut the ends off to shorten them about 1 inch. The vent, I dont like, so I might not add it on. I dont want to use the gt4 vent either. I want something completely different but cool. I got to look at some concept cars. If you have any ideals please post your pictures here.

[right][snapback]227913[/snapback][/right]

[Coomer]

Here is the other one


[right][snapback]227726[/snapback][/right]

That's hot.

[bryce804]

whats with you guys and steelin hyundai stuff??? first yang and him trying to steal my aem intake. and now you and your bumper. GODDDDD...anyways i like the tiburon mold one best

[madmods]

100.00 + shipping takes that tiburon razzi front end

[prpnum1]

How would you get around the part where the fender and the bumper meet how there's thatkinda dip or whatever there cuz the 7th gen doesnt have that? Just wondering cuz i was actually interested in something similar to this

[madmods]

How would you get around the part where the fender and the bumper meet how there's thatkinda dip or whatever there cuz the 7th gen doesnt have that? Just wondering cuz i was actually interested in something similar to this
[right][snapback]228072[/snapback][/right]

When I cut up the vader top, I cut it in half and kept the sides also, so I could bolt on to the fenders. I actually cut those lumps off the vader sides. The veilsides(bottom half of my fairing actually are going to stretch to the beginning of the fender. So that hole bubble is actually covered. What i got to do now, is fabricate some sides, about 2 inches.

[madmods]

Got alot done today. The bumper is actually a reality, and now a part of my car. I glassed the 2 parts together using fiberglass and kevlar. The pictures are real and not photoshopped. I then primer it white to look a little better. While I was at I pulled out my hot glue gun and glued those rubber rings to my headlights. So tommorow, I will go and buy some shortstrand kittyhair, since I dont want to use rage filler for this. I will then hit the front with the grinder because some of the kit is overlaping top to bottom. Once thats sanded flat, I will apply the kittyhair and sand it straight.

The 7th gen veilside sideskirts also found their way on to my car. They took some serious warping with a heatgun, and the they are about a inch and a half too long.
Cool, because I could not get the front part to fit right. Its warped funny. so I cut the front off to take the space. I will cut the front in 2 pieces and mold it back on to the side skirts, due to its wierd shape. Screws showing will done be countersunk and tops filled with filler so you cant see them.
The project is working out pretty good so far. I still need a cool looking vent for the front to give it some life. So put your pictures up. Doggy, I didn't like the rsx veilside vent, but thanks though for the ideal. I also dont want to use the gt4 vent either. Here are some pics.

[dannesweden]

Man good job! That front looks awesome.
Cool as it looks almost like the pic I photshopped.
What kind of vent do you want? Agressive, rounded etc. ....

I could make a few skisses....

[madmods]

Man good job! That front looks awesome.
Cool as it looks almost like the pic I photshopped.
What kind of vent do you want? Agressive, rounded etc.  ....

I could make a few skisses....
[right][snapback]228139[/snapback][/right]

Something different like a concept car or something wierd yet cool.
Thanks danne!

[redtcel]

holy hottness batman that looks dope.

[Coomer]

Sweet work madmods!

[DamDirtyApes]

are u gonna keep your car white afterwards ... just curious

[madmods]

are u gonna keep your car white afterwards ... just curious
[right][snapback]228354[/snapback][/right]

I might go yellow, or ferrari gunmetal blue

Today, I completly grinded sown the mating surfaces and applied kittyhair to it. After i sanded that down, i applied rage filler. I then started fabricating the sides from fiberglass, but i ran out of mat. i also continued working on the sideskirts.
Heres some pics of today.

[creis]

not bad, not bad at all, good work.

I'm not a huge fan of that kit, but its lookin pretty darn good.

[doGGy]

here goes my opinion

In overall i like the look of this kit on 6gen. But what i would try to modifie is those 2 side vents. on 7 gen they look ok, but 6 gen front is a bit more massive, so those vent look out of proportion and too tiny.. if you could take the marker, and draw the bigger vents on the sides, just that you could imagine how would they look if they there a bit bigger. Actually i will try to photoshop them

[doGGy]

here ya go, quick photoshop, but you will get what im talking bout..

This post has been edited by doGGy: Dec 31, 2004 - 4:25 AM

[Fietsbel]

that si the badass look!

[madmods]

Most of the front is done, got alot more done. Went out and bought some more mat to fab up the sides. They just need some sanding and the rage filler applied, rivets sanded flat and then block sanded. I hope to have this project completely done by sunday night. Heres some pics of the sides:





Heres pics of the front. You can't see where the top and bottom mate any more. I also finished fab up the sideskirts. I don't like them, then I realised whats wrong with them. The rear fin part is too high. So I am cutting it down an inch to match the body lines.





I need some turnsignal ideals guys, because I don't have none. I was thinking of cutting out the stock turnsignals and molding them in. i really don't want to do that though. Are turnsignals on the fenders legal, or do i have to have them by the headlights?

[playr158]

hmmmmm i hope that is your hood popped, but it looks good from what i can see now...

[vangSTa_celica]

Cavalier clear turn signals maybe?

[madmods]

hmmmmm i hope that is your hood popped, but it looks good from what i can see now...
[right][snapback]228814[/snapback][/right]

Yea the hood is open. Its actually flush, and looks good with the hood closed.

This post has been edited by madmods: Jan 1, 2005 - 4:45 PM