Parting out 95 Celica ST Options

[Hart1583]

Hey guys, my dads friend owns a junkyard and he has a wrecked 95 celica st, silver.
I can get the parts off it for super cheap, here's what I remember that is BAD on it:

Wrecked in the front, some engine parts MAY be ok, but its banged pretty good. My guess is heads and **** are ok.

No doors ( I got em hehe )
No gas tank lid (me again)
No driver seats
Interior is pretty shot

We still got the gauge cluster, temp control thingy, ect.
It is not a hatchback.

Ask for specific peices and Ill make a trip to the yard when I have 5 requests, I will not take a fee out for the parts, only wat the yard wants (dirt cheap pops good friend) and shipping.

Will try and get some pics of it 2nite and post 2morrow, but make som requests!

[Coomer]

If the car is a five-speed I need the trim panel around the shift boot, and the shift boot as well if it's in good shape.

I also need the trunk carpet if it's in good shape.

Can you check on that stuff for me? Thanks.

Edit: Oh yeah, could you also see how much the coupe tails are, and if they're in good shape? I may take those too if the price is right.

This post has been edited by Coomer: Jan 18, 2005 - 4:34 PM

[Chrobis]

I want the dash insert pieces if they are in good shape, the trim around the radio, the Shift suround if coomer dosnt pick it up, the Cig Lighter if coomer dosnt want that, the drivers and passenger side vent, the defroster vents right above the previous 2 vents, and the door handle insert things.

(pretty much everything that would be painted if you painted your dash, as I did and want it back to black)

I can get pics of the items if your unclear of what items.

[Hart1583]

It is an Auto forgot 2 post sorry

[Coomer]

It is an Auto forgot 2 post sorry
[right][snapback]235284[/snapback][/right]

OK, well then I wouldn't need the interior trim surrounding the shift lever. I could still use the trunk carpet and tail-lights though if they're both in good shape.

[ghostdog]

could I get a price on the trunk lid and rear bumper shipped to 08528.. not sure if the c/f one is gonna happen

thanks!

[Hart1583]

I know the other stuff he'll let go cheap, if not anything. Trunk lid, whats a resonable price? Also back bumper, wats a resonable price?

Going 2 the yard tonight, will update later 2nite

Also shipping will be a lil bit cause Ill have to go to the box factory across town and get a custom fitting box, shouldnt be more than 10-20bux for the box tho

This post has been edited by Hart1583: Jan 18, 2005 - 7:16 PM

[Jeremy1210]

need center console armrest and parts needed to hold it in the console

[ghostdog]

I know the other stuff he'll let go cheap, if not anything. Trunk lid, whats a resonable price? Also back bumper, wats a resonable price?

Going 2 the yard tonight, will update later 2nite

Also shipping will be a lil bit cause Ill have to go to the box factory across town and get a custom fitting box, shouldnt be more than 10-20bux for the box tho
[right][snapback]235322[/snapback][/right]

looks like I would spend ~250 for both these pieces locally. dunno if you can beat that considering shipping (even via greyhound) is going to be quite considerable. let me know what figure you come up with

thanks

[trdevelopment]

i need the stock intake box, the plugs on the back panel where you put the taillight bulbs(its got a little picture of a bulb)how much shipping to 85053?

[MomoGST]

how much for the winshield washer motor?? id like that..

[Hart1583]

Didnt make it down last night or today, will get there in the next day or 2. Ill keep everyone updated!!!

[Rjb23]

How much for the climate control?

[TrD3sgte94]

r u still selling parts if so pm me the price for the passenger headlight assembly if still good and maby front windshields if un cracked...

-wes-

[Hanyo]

i assume the air bags are no good?

[jayi12-15psi]

I know you're from peoria, but the salvage yard dosen't happen to be in st louis, does it?

[Blakout16]

how about for the ovalish driving lights? that'd be cool... PM me... i'd pay like 20-30 for em i guess...

[celicaboston1983]

hey I need the pass side sun visor (tan?) and I need the pass side inner fender liner. let me know

[prpnum1]

Hey i need the metal bracket for the stereo if you can get that for me. PM with price. thx

[95ST205]

I need the rear tail lights and wiring, how much?

[CJOHNST3]

OK - this is a really simple piece, but it needs to be cut of the main wiring assembly. I need the little plastic piece that the headlight bulb fits into. This same piece then gets inserted into the headlamp and twists into place - I need that piece - small plastic piece for the passenger side low beam or the outside passenger light.

Can you get that for me? I'll pay Paypal immediately!

[HaRv3sTeR]

I need the third brake light assembly (the one of the trunk)


how much? E1X1B1 (Canada)

[psyko]

i need the passanger side airbag cover, and the drivers air bag cover, it should be the whole peice on the steering wheel with the toyota emblem on it.

[Dr_Tweak]

The ST has rear drums, right?

[Coomer]

The ST has rear drums, right?
[right][snapback]253083[/snapback][/right]

Only in North America. Overseas the AT200 has four-wheel discs.

[Supersprynt]

Do you have the rubber surrounding piece for the high beams? I need those 2 with clilps.

[prpnum1]

how much for the radio bracket? PM with price

[tomazws]

This is a weird one but I WILL PAY YOU THIS!!!!!!!!!!

On the stock radio receiver deck, I want the nob for the "BASS/TREBLE"

PLEASE let me know you ahve it!!!!

Much thanks!

[thejetix]

im in need of a headlamp assembly low beam passengers side do you know there in good shape -how much?

[presure2]

im in need of a headlamp assembly low beam passengers side do you know there in good shape -how much?

this thread is from 2005..lol