 Shift boot, Need a favor |
 Jan 19, 2005 - 12:44 AM
|
 
|
 Enthusiast  Joined Nov 17, '03 From New York Currently Offline Reputation: 1 (100%)  |
Ok i am purchasing a carbon fiber shift boot from a guy that makes them. He has never made one for our cars so he wants the dimensions. The only problem is i was an idiot and cut my shifter short so i cut my shift boot. Now i got a TRD quickshifter and need a new boot. If someone could do me a big favor and just measure the shift boot for me. I need the bottoms length and width. And then i will also need the depth/height of the boot as well. If your willing to do this just also let me know where exactly you measure from so i can tell him. Thanks a lot!
|
 |
Replies
(1 - 3)
|
Jan 19, 2005 - 12:21 PM
|
|
|
Enthusiast Joined Nov 14, '04 Currently Offline Reputation: 0 (0%) |
for the bottom just measure the distance between the clips that hold the boot in place. the only problem you will run into is the stock boots have a small metal bar that fits in the clips...
|
|
Jan 19, 2005 - 1:07 PM
|
|
 Enthusiast Joined Nov 15, '02 From Vidor, TX Currently Offline Reputation: 1 (100%) |
thats an easy problem to fix i bought a new shift boot off ebay and just sew my stock shift boots bar into the new one...
-DMC |
|
Jan 19, 2005 - 2:07 PM
|
|
|
Enthusiast Joined Nov 17, '03 From New York Currently Offline Reputation: 1 (100%) |
Yea i figured i would just do the same but the guy wants me to ge tthe dimensions to make sure it fits. My shift boot is just a little destroyed so i wanted dimensions from one in good condition.
|
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 5th, 2025 - 9:45 AM |