6G Celicas Forums

Welcome Guest ( Log In | Register )

> 94 celica st 7afe, parts car
post May 23, 2005 - 12:41 AM
+Quote Post
94VG30DE



Enthusiast

Joined May 23, '05
From GR, MI
Currently Offline

Reputation: 0 (0%)




hey guys, my little brother just totalled my black 94 Celica ST. therefor, it is now my job to part out the car. here are some specs:

- almost every panel on the car has dents in it, and don't even ask for anything from the drivers side. it's gone.
- the 7AFE engine has about 150k on it, but has had regular oil changes on it since it was a baby. still runs as strong as the day we got it.
- 5-speed transmission had the throw-out bearings replaced recently, has regular fluid changes, and is in good shifting condition. still smooth with positive gear selection, and still fast.
- cloth back seats are still in pretty good condition, considering all of my friends have
enough dignity to not cram themselves into the back seats.
- original stock cassette deck is in pristine condition, considering i removed it as soon as i got the car.
- clutch was recently replaced, and still pulls hard off the line. i am very experienced with manual transmissions, so the clutch was not abused in any way.
- still stock disc brakes up front and drum brakes in back.
- basically anything that is on the stock car is still there and in decent condition.

anything you want from the car, offer me a price, and i'll see what i can do. i need the money, and the car needs do go, so if i see i reasonable price, you might just get the part you want. i am fishing for offers right now, so if you want parts, contact me NOW, otherwise the whole car is going to a junker and you don't get any of it. thanks guys.

chris (94VG30DE)
3 Pages V   1 2 3 >  
Start new topic
Replies (1 - 41)
post May 23, 2005 - 1:35 PM
+Quote Post
dustin15brown



Enthusiast
*****
Joined Aug 17, '03
From Bloomington, Indiana
Currently Offline

Reputation: 62 (98%)




hit me up on aol dustin15brown


--------------------
post May 23, 2005 - 7:16 PM
+Quote Post
playr158



Enthusiast
*****
Joined May 22, '03
From NOVA
Currently Offline

Reputation: 16 (100%)




hmm
what would you take for the enigne no tranny
post May 23, 2005 - 11:01 PM
+Quote Post
Rjb23



Enthusiast
*****
Joined Feb 8, '04
From KY
Currently Offline

Reputation: 0 (0%)




I need some plugs out of the engine bay, the reverse light plug, & the O2 sensor plug.
post May 24, 2005 - 12:30 AM
+Quote Post
cyb593



Enthusiast
***
Joined Feb 22, '04
From USA
Currently Offline

Reputation: 3 (100%)




pmed you
post May 24, 2005 - 9:14 AM
+Quote Post
CelicaZR



Enthusiast
*****
Joined Mar 25, '05
From Sydney, Australia
Currently Offline

Reputation: 0 (0%)




is the interior still intact?
cause i want the glovebox ( the one that is in front of the passenger)

thanks


--------------------


98 ST204 ZR - Black Beauty - Roaming the streets of Sydney
73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser
75 TA22 LT - Snow White - Mint Classic Weekend Cruiser
77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser
94 MX-5 NA8 Clubman - Red Racer - Looking for corners
WIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona
86 Corona RT142 - Daily Driver

6GC 4 Life Baby!!!
post May 24, 2005 - 10:00 AM
+Quote Post
Hanyo

Enthusiast
*****
Joined Aug 16, '03
From Bay area
Currently Offline

Reputation: 0 (0%)




i need the little nick nack plastic parts.. like the rear top of the strut covers.

and the little accessories plastic covers under the igniton key and the light dimmer..



pm for price ect..
post May 24, 2005 - 11:56 PM
+Quote Post
gemStudio



Enthusiast
*
Joined Mar 19, '05
From Seattle Washington
Currently Offline

Reputation: 0 (0%)




how is the AC aluminum tubing? I recently got a hole in mine and I need to replace. it. If yours is in good shape I am willing on buying it. If you need I can send you a pic of what I need. also how much do you want for it.


--------------------
post May 25, 2005 - 12:42 AM
+Quote Post
FAQdaWorld



Enthusiast
***
Joined May 24, '03
From Milton, Delaware
Currently Offline

Reputation: 0 (0%)




i pmed you before, but just so everyone else knows, i want the center console, and the plastic trim around the radio.


--------------------
AIM : FAQdaWorld
post May 25, 2005 - 12:50 AM
+Quote Post
ArizonaRed



Enthusiast
***
Joined Sep 17, '03
From Tampa FL
Currently Offline

Reputation: 1 (100%)




did you get my pm?


--------------------
-97 Celica ST
-2001 Celica GTS dk blue mica 100hp per litre
(GOT LIFT?)
post May 25, 2005 - 1:14 AM
+Quote Post
cyb593



Enthusiast
***
Joined Feb 22, '04
From USA
Currently Offline

Reputation: 3 (100%)




can i get the cigarrette holder and i was hoping for the passenger side high beam and for the arm rest in the center
post May 25, 2005 - 9:05 AM
+Quote Post
dustin15brown



Enthusiast
*****
Joined Aug 17, '03
From Bloomington, Indiana
Currently Offline

Reputation: 62 (98%)




I could use the passenger side door panel.


--------------------
post May 27, 2005 - 12:10 AM
+Quote Post
94VG30DE



Enthusiast

Joined May 23, '05
From GR, MI
Currently Offline

Reputation: 0 (0%)




ok guys, here is the deal: the car is in central IL, and i am currently in west MI. however, i have lined up a engine lift and a couple friends for about a week from now, and i am planning to get off work and go down to take apart the car. when i do that, i will need pretty close cooperation from the buyers, as everything will be time-conscious. As of right now i am accepting PayPal for payment. It seems the most reliable and painless process for me. i will be in contact with you all in the very near future. until then, if you really want to get ahold of me, use my personal email. it is a lot more organized for me that way. thanks folks!

chris (94VG30DE)
post May 29, 2005 - 1:55 PM
+Quote Post
94VG30DE



Enthusiast

Joined May 23, '05
From GR, MI
Currently Offline

Reputation: 0 (0%)




ok, i will be home June 5-8 (providing i am able to get off work.) this means that pictures should hopefully be posted by june 6 of all the parts you guys want to buy, probably with prices next to them. around that time i will be releasing my personal cell number so that i can get everything running smoothly (i have dialup at home, no good). keep paying attention to the topic, and pay close attention to the topic between the 5-8. i plan to have everything settled and getting parts shipped to people by the 9th when i leave. Also, the parts will be shipped from Bloomington, IL (central IL) so if anyone wants to save themselves some shipping and come pick up the part, that would be wonderful. Also, i live in Grand Rapids, MI. therefor, if anybody in the area would like to arrange for me to bring some parts back up with me, that might be possible. keep in touch folks!

chris
post May 30, 2005 - 12:46 AM
+Quote Post
FallenHero



Enthusiast
*****
Joined Dec 26, '02
From Alabama
Currently Offline

Reputation: 2 (100%)




I could use the engine (no head or peripherals needed) just the long block


Let me know if it is not sold.
post May 30, 2005 - 12:55 AM
+Quote Post
94VG30DE



Enthusiast

Joined May 23, '05
From GR, MI
Currently Offline

Reputation: 0 (0%)




nothing is sold yet, all the selling i will do after i post pictures, when i get home. i will be selling parts while i am taking the car apart.

chris
post Jun 1, 2005 - 1:10 AM
+Quote Post
mandrek



Enthusiast
***
Joined May 4, '05
From western MD/NOVA
Currently Offline

Reputation: 2 (100%)




hey, is the gas door still good? if so i need would like to get that, if i could....


--------------------
post Jun 2, 2005 - 3:25 PM
+Quote Post
celi_gt_racer



Enthusiast
***
Joined Feb 6, '03
From huntingdon tennessee
Currently Offline

Reputation: 1 (100%)




i would be interested in the seats.. just the front two.. and some pics would be nice.. pm me w/ price and pics please biggrin.gif


--------------------
IPB Image
post Jun 7, 2005 - 8:45 PM
+Quote Post
94VG30DE



Enthusiast

Joined May 23, '05
From GR, MI
Currently Offline

Reputation: 0 (0%)




ok folks, here is the deal. i will be home tearing apart the car with some friends of mine this Saturday (June 11). i will be posting pictures of parts, saturday night hopefully, and will continue taking parts off the car until monday or tuesday. therefor, i need close cooperation from buyers, as everything is VERY time critical. if you guys could help me out by giving me offers for the parts you are looking for, that would be wonderful. i will be doing a lot of business at one time, so the less thinking i have to do, the better. also, shipping will be added to the price of whatever item you want. have your PayPal accounts ready!. calling my phone with any questions or prices or anything would be preferrable to me, as i always have access to my phone, but do not always have access to internet. thanks all!

chris

cell phone number:::
309.532.2010
post Jun 7, 2005 - 8:47 PM
+Quote Post
FAQdaWorld



Enthusiast
***
Joined May 24, '03
From Milton, Delaware
Currently Offline

Reputation: 0 (0%)




I'll give you 80 bucks for the center console w/ armrest, plastic and shiz, and the plastic trim that goes around the radio. I DO NOT need the plastic trim around the shifter tho.

-FAQ


--------------------
AIM : FAQdaWorld
post Jun 7, 2005 - 9:06 PM
+Quote Post
Phat_99CeliGT



Enthusiast
*****
Joined Aug 30, '02
From Ohio
Currently Offline

Reputation: 0 (0%)




i need:
rear speaker grills
plastic poppers that cover taillight nut on rear plastic panel
drivers side trim piece that attaches to the kick panel and runs up the side of the dash.


--------------------
Jared Harwell
user posted image
post Jun 7, 2005 - 9:10 PM
+Quote Post
94VG30DE



Enthusiast

Joined May 23, '05
From GR, MI
Currently Offline

Reputation: 0 (0%)




also: more part info!!!
i will list parts that i have new info for, followed by when they were replaced, followed by approximately how many miles each piece has on it.


clutch: (transmission was also serviced) Oct 2003. 22,000 miles

starter: sept. 2004. 10,000 miles

front brake rotors, calipers, rear brake shoes: Jan. 2005 4,000 miles

tires: 195/70 R14 90S Sigma Regent all season (Sigma is kind of an off brand, but they are decent all season tires) Apr. 2005 200 miles

chris
post Jun 10, 2005 - 9:53 PM
+Quote Post
mandrek



Enthusiast
***
Joined May 4, '05
From western MD/NOVA
Currently Offline

Reputation: 2 (100%)




so that's a manual tranny?

also, is the the gass door still good? cuz i reellllly need a new gas door.

if it is still availible how much for the manual tranny and all that is needed to make an auto-to- manual swap... all parts realted to shifter. cables, actual tranny, everything.... this is for a 7afe right???

thnx
oh but plz give me a price quote first plz....


This post has been edited by mandrek: Jun 10, 2005 - 9:57 PM


--------------------
post Jun 11, 2005 - 10:30 AM
+Quote Post
94VG30DE



Enthusiast

Joined May 23, '05
From GR, MI
Currently Offline

Reputation: 0 (0%)




ok folks, i'm in IL. i talked to some people about shipping, and it sounds like it's going to cost me at least $500 to ship the engine. therefore, i am going to say $300 obo for the engine, then if you want it shipped, tack on about an extra $500. that being said, i think it would be best for whoever wants the engine to meet me somewhere in the midwest, preferably Illinois or Indiana.
For mandrek (transmission switch) i think i could get sell everything attached to the transmission for somewhere around $700. it is gonna take a lot of work to take out those components, and everything is still in very good condition. if you don't like that, you may quote me a price.
BY THE WAY FOLKS, my phone number is 309-532-2010. PLEASE call me with any replies you have from here on out, b/c i can not be sitting at the computer the whole time. phone = faster. If you want a part, i need you to call and offer me a price while i am at the car. I am running severely low on time right now, and i need all the cooperation i can get. pictures will be posted as a get parts out of the car. thanks, and happy bidding!!!

chris
post Jun 11, 2005 - 6:14 PM
+Quote Post
Niskyspy



Enthusiast
**
Joined Jan 21, '05
From NY
Currently Offline

Reputation: 0 (0%)




Are u still selling things?
I am gonna get a celica in 3 days and I would like to buy some parts that is if u have HB. I am looking for the trunk plastic trim. Left and Right side that is only if its not cracked or broken, another thing is driver door trim that is only if it doesnt have any bubles because of rain and stuff. And could u give me clips that hold roof trim in the car?
email me with price and where u live
niskyspy@gmail.com


--------------------
<<AKA THA RUSSIAN>>
post Jun 11, 2005 - 6:20 PM
+Quote Post
trdevelopment

Enthusiast
***
Joined Jul 27, '04
From phoenix az
Currently Offline

Reputation: 0 (0%)




looking for the shift panel.
post Jun 12, 2005 - 1:35 AM
+Quote Post
94VG30DE



Enthusiast

Joined May 23, '05
From GR, MI
Currently Offline

Reputation: 0 (0%)




HERE are the pictures you have all been waiting for!!! please start calling my cell phone and giving me offers!

window controls for driver and passenger side:
user posted image

side markers and turn signals from a couple angles (they need to be Windex-ed):
http://i19.photobucket.com/albums/b171/94V...idemarkers1.jpg
http://i19.photobucket.com/albums/b171/94V...idemarkers2.jpg

trim around the shifter. (the leather shifter boot is a little worn out)
http://i19.photobucket.com/albums/b171/94V...shiftertrim.jpg

rear speaker driver's side, still in good condition and has better bass response and accuracy than the aftermarket speakers i put in! (the other side is the same condition, just not taken out yet)
http://i19.photobucket.com/albums/b171/94V...eakerdriver.jpg

the passenger seat from a couple different angles (needs to be vacuumed, which i would do before i shipped it) still pretty clean and the apholstry is still good
http://i19.photobucket.com/albums/b171/94V...sengerseat1.jpg
http://i19.photobucket.com/albums/b171/94V...sengerseat2.jpg

driver's side inside door handle (rubber/plastic piece, perfect condition):
http://i19.photobucket.com/albums/b171/94V...driversside.jpg

center console assembly:
http://i19.photobucket.com/albums/b171/94VG30DE/console2.jpg
http://i19.photobucket.com/albums/b171/94VG30DE/console1.jpg

trim that goes around the head unit and such on the dash: http://i19.photobucket.com/albums/b171/94V.../centertrim.jpg

call with any questions, more pics will be up tomorrow (headlights, other speaker, hopefully engine, transmission, clutch, flywheel, ac, radiator, and anything else you ask for pictures of...)

chris
309-532-2010
post Jun 12, 2005 - 11:23 AM
+Quote Post
94VG30DE



Enthusiast

Joined May 23, '05
From GR, MI
Currently Offline

Reputation: 0 (0%)




what is the reverse light plug, and where is it? what does it look like. keep in mind i have a manual transmission car... a picture, or location would help me out greatly.

chris
309-532-2010
post Jun 12, 2005 - 12:51 PM
+Quote Post
Cutrara



Enthusiast
*****
Joined May 6, '05
From PA
Currently Offline

Reputation: 4 (100%)




I see mandrek mentioned he wanted the gas door. If he doesn't need the gas door HINGE I'll take it.


--------------------
hey, nice mod does it come in hetero?


Need parts? I'm parting out a '94 ST
post Jun 13, 2005 - 8:19 PM
+Quote Post
mandrek



Enthusiast
***
Joined May 4, '05
From western MD/NOVA
Currently Offline

Reputation: 2 (100%)




actually. i should be more accurate, it is the gas door hinge that i need more. but the one on mine is rust welded to the gass door it self, which i'm not shure that i could salvage, even if i could get a newer hing to replace it. so i do infact need the whole thing... plz let me know about the gas door..


abut the tranny... i'm not going to be able to do it, any more i just got hit up to help a friend in need and it just ate up my CC large cash buffer. sorry, but i do appreisiate all of the attention that u payed to my request for the tranny.

plz let me know about the gas door.
mandrek


--------------------
post Jun 14, 2005 - 12:04 AM
+Quote Post
94VG30DE



Enthusiast

Joined May 23, '05
From GR, MI
Currently Offline

Reputation: 0 (0%)




ok folks, here are some pics of more parts that i took out.

rear plastic trim:
passenger side:
http://i19.photobucket.com/albums/b171/94V...rinteriorps.jpg
http://i19.photobucket.com/albums/b171/94V...riorpscrack.jpg
drivers side:
http://i19.photobucket.com/albums/b171/94V...rinteriords.jpg
http://i19.photobucket.com/albums/b171/94V...riordscrack.jpg

visors:
http://i19.photobucket.com/albums/b171/94V.../visorfront.jpg
http://i19.photobucket.com/albums/b171/94V...E/visorback.jpg

glovebox:
http://i19.photobucket.com/albums/b171/94VG30DE/glovebox.jpg

plastic cover over the steering wheel (covers ignition and dimmer knob):
http://i19.photobucket.com/albums/b171/94V...E/wheeltrim.jpg


want parts? call me!

chris
309-532-2010
post Jun 14, 2005 - 5:58 PM
+Quote Post
gamesteristj

Enthusiast
*
Joined Feb 18, '04
From Spokane Washington
Currently Offline

Reputation: 0 (0%)




is the air bag possible still intact? dught it but worth a try
post Jun 14, 2005 - 10:27 PM
+Quote Post
94VG30DE



Enthusiast

Joined May 23, '05
From GR, MI
Currently Offline

Reputation: 0 (0%)




the airbag is still intact. littly brother got hit on driver's side (no head-on force applied) so the airbag never deployed. any tips on getting it out without breaking my arm? let me know, and you can have it.

chris
309-532-2010
post Jun 15, 2005 - 10:02 AM
+Quote Post
gamesteristj

Enthusiast
*
Joined Feb 18, '04
From Spokane Washington
Currently Offline

Reputation: 0 (0%)




yeah definately I will email you some picts from my celica manual! that would be great. Do you know how much money you want for it? (i would also like the passenger side airbag as well...)
Thanks TJ
Email: Gamester_is@yahoo.com
post Jun 15, 2005 - 10:32 AM
+Quote Post
S_C_M



Enthusiast
**
Joined Mar 2, '04
From Louisiana, USA
Currently Offline

Reputation: 2 (100%)




I need a driver's side steering knuckle and hub, if yours is intact, I'll buy it immediately. PM or email me, please.
post Jun 19, 2005 - 10:36 PM
+Quote Post
94VG30DE



Enthusiast

Joined May 23, '05
From GR, MI
Currently Offline

Reputation: 0 (0%)




ok folks, i will once again return to my home in IL this week to further take apart the car. in the spirit of that, here are some more pictures!

head light assemblies, with extra detail photo of the crack in one glass cover (there is no damage to the inside of the assembly, and the light still works fine.
http://i19.photobucket.com/albums/b171/94V...headlightDS.jpg
http://i19.photobucket.com/albums/b171/94V...headlightPS.jpg
http://i19.photobucket.com/albums/b171/94V...dlightcrack.jpg

passenger door panel (or whole door if you want it...)
http://i19.photobucket.com/albums/b171/94V...rdoorpanel1.jpg
http://i19.photobucket.com/albums/b171/94V...rdoorpanel2.jpg

let me know if you want any other parts. for the love of god, please call me. my internet access is sporadic at best (as you have seen). the 2 min long-distance call will not kill you. thanks

chris
309-532-2010
post Jun 20, 2005 - 5:06 PM
+Quote Post
gamesteristj

Enthusiast
*
Joined Feb 18, '04
From Spokane Washington
Currently Offline

Reputation: 0 (0%)




want the passenger low beam and possibly the support bars, the crunch bar (the real metal bumber crunch thing), and the a/c condenser? Will send some picts of what I want.
TJ
post Jul 5, 2005 - 11:20 AM
+Quote Post
pedzconcordia

Enthusiast

Joined Jun 1, '05
From Colorado
Currently Offline

Reputation: 0 (0%)




does it has a sunroof?
i need a sunroof motor..
how much w/ shipping to 80134?
post Jul 5, 2005 - 6:19 PM
+Quote Post
Fate



Enthusiast
****
Joined Nov 30, '04
From Atlantic City
Currently Offline

Reputation: 21 (100%)




how much for the visors? shipping to 08244


--------------------
post Jul 6, 2005 - 11:17 PM
+Quote Post
94VG30DE



Enthusiast

Joined May 23, '05
From GR, MI
Currently Offline

Reputation: 0 (0%)




ok folks, it's go time! i have the car basically stripped down to the frame, and all the parts are in my basement. if you want a part, PM or email me your zipcode. i will give you a shipping estimate, price, and get everything wrapped up as soon as possible. however, if you call me, all business will get done exponentially quicker! (that means way faster for everyone that didn't take calculus) so call me or PM me or email me or something, but i can't give you a price before i have a zip code. thanks.


Chris
309-532-2010
post Jul 8, 2005 - 11:50 AM
+Quote Post
94VG30DE



Enthusiast

Joined May 23, '05
From GR, MI
Currently Offline

Reputation: 0 (0%)




Here is a parts update for all of you who havnt bought your parts yet: Buy Your Parts! I have new buyers contacting me asking for parts that technically i have already promised to people who showed interest earlier, but i can't seem to get in touch with those original people. There, for, if you want the part you asked for, PLEASE contact me soon, or I might accidently sell a part to someone else. If you don't want the part you originally asked for, that is fine too, just please tell me, so i do not waste time reserving it for you.

Here are the parts i no longer have:

- Dash radio trim
- PS window control trim
- DS door handle cup (inside)
- center console
- sunroof motor
- all 4 headlights
- hatch struts
- DS airbag
- PS airbag
- sunroof assembly
- hood hinges
- hood opener cable

in case you didnt know, that means i still have a TON of parts, including the many of the black plastic interior parts and panels. call, PM, or email me with part requests, and PLEASE include your ZIP code so i can get you a shipping estimate (and therefor a more final price estimate) as quickly as possible. Thanks for shopping!

Chris
309-532-2010
post Jul 8, 2005 - 11:52 AM
+Quote Post
azian_advanced



Enthusiast
*****
Joined Apr 18, '05
From Calgary
Currently Offline

Reputation: 20 (100%)




all 4 headlights are sold.


--------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

3 Pages V   1 2 3 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 10th, 2025 - 4:36 PM