For all the GT4 owners, And for all the GT4 "replica" Owners :D Options

[doGGy]

I did these turns to the guy Snakeloa, he is the owner of the GT4 in Germany, and sometimes he shows up on this board... He wanted clear turns for his GT4, and he wanted for Germany police to not notice they are not TUV aproved, so i had to make the writing of E13 and etc on them

This is the comparison to the stock turn vs DCW clear turn

Hope you guys like this

[jgreening]

flawless work Romas....very nice.

[TJ_celicapower]

ooo yes yes very flawless... what did you use to make them???

[snakeloa]

First of all i would like to thank my favorite forum Member, and the god of customizing doGGy!!! for the great work he did!!! Thak you for spending so much time to produce such a unique good looking part for my little Celica.

I can't wait to receive them

Jörch

[richgt4]

Are these the same ones that are being offered on the GT4OC forum Jorch?

Cheers,

Richard

[Batman722]

doggy, those look incredible. Fantastic job. Produce more and sell them !!!

[dstrbcelica]

romas pwnz.

-dstrb

[lagos]

all i gots to say is...... how much ?????!!!!!!!! woot!

[mark_426]

^^

I'd be interested in a pair for my new bumper...

[vangSTa_celica]

That's awesome work Romas. I think I've seen someone attempt to just sell the clear lens itself for a couple hundred bucks. Again, awesome.

[popstar]

hmmmm

there so nice .... i need them, even without all the stamps on them

soooooooo..... how much to get a pair to moscow ??????

[shin]

any chance of pics taken of it installed on the GT4 bumper?

[Jeremy1210]

Romas why can't you live here in the States? That way all of us could drive to your place and watch and learn.

[Hanyo]

its sad to think a ricer would think that peice of art is stock or some cheap imatation off ebay.

good work romas!

[presure2]

all i gots to say is...... how much ?????!!!!!!!! woot!
same here!

[fastgt]

i think i figured it out, Romas has a pact with the devil

[ILuvMyCelica95]

Romas why can't you live here in the States? That way all of us could drive to your place and watch and learn.
[right][snapback]295902[/snapback][/right]

i totally agree, haha i'd be your groupie lolol

ps: you should make those for the 94-95 bumper

[doGGy]

Lol...

Tina...

As for 94-95 this is the second thing on the list with Clear corners

As for all the GT4 turns owners, for now i can only REWORK the stock ones... Later i will be able to sell compleatly new pairs..

Romas why can't you live here in the States? That way all of us could drive to your place and watch and learn.
[right][snapback]295902[/snapback][/right]

i totally agree, haha i'd be your groupie lolol

ps: you should make those for the 94-95 bumper
[right][snapback]296363[/snapback][/right]

[snakeloa]

@shin

soon ..... As soon as they arrive

THESE INDICATORS ARE FOR GT FOUR ST205 ONLY.... (because of the different shape)

Unfortunatly Doggy who made them up for me was not able to make complete new ones @ the moment. So we decided to modify the old ones. It took him two days to get these two indicators to look like that....

But look at this great result!!!!

And i bagged him to do us all a favour and make a grou-buy-modification out of that....


Well what can i say he said yes

OK here is what we planned....

So this thread is only to see about how many GT Four ST205 drivers would like to get their indicators modified.

It would be like that.
As soon as we decide how and when this should start....
Everybody is going to send their parts to one driver who is going to send them in one parcel (with name tags on them) to doggy.

Then Doggy is going to modify them:
a) cut out the orange glass (he keeps a little surrounding of the orange stuff)
b) then he cuts the clear one to fit into it
c) he glues them together
d) sands them down and polishes the edges
e) he engraves the EU permission mark E13 and a Toyota Sign (he could leave that away for you over there in the US)
f) he colours the surrounding (other colours than black are possible (i guess that would cost a little extra for the colour...)


Then he will send them back to us.

In advance i will have to say again we still have to decide if we start this soon or during the winter season. And it will take quite some time ....

the costs you are asking????

Well 220 US$ a pair

Just kidding ok 60€ which would be around 74US$ regarding to the exchange rate a pair plus postage I think thats a fair price regarding 2 days work (he might get it done a bit faster in the future, but it is still an awfull lot of work)

So who would be interested then:
1)
2)
3)
4)
5)

I hope i got everything allright.... If not please correct me doGGy

cheers Joerch

This post has been edited by snakeloa: Jun 8, 2005 - 2:36 PM

[doGGy]

Everything is almost correct Joerch.

But for now, this GB is for the guys who are inpatience, cuz i DO PLAN to mass produce compleatly new turns, so there would be NO need for sending me your turn signals. As for now, the situations is just like Joerch said.

[ILuvMyCelica95]

Lol...

Tina...

As for 94-95 this is the second thing on the list with Clear corners

As for all the GT4 turns owners, for now i can only REWORK the stock ones... Later i will be able to sell compleatly new pairs..

Romas why can't you live here in the States? That way all of us could drive to your place and watch and learn.
[right][snapback]295902[/snapback][/right]

i totally agree, haha i'd be your groupie lolol

ps: you should make those for the 94-95 bumper
[right][snapback]296363[/snapback][/right]

[right][snapback]296381[/snapback][/right]

he he

[presure2]

doggy, i am IN once you start making these, i cant afford to be without turn sigs for a few weeks, and dont wanna go buy another set of turns just to modify them.

[jgreening]

I'm in too for the new set if they can be completed in June.

[OOBE]

Yeah, doggy made a pact with the devil...soul for skill, muahahaha!

Doggy, I am in for a pair...my bumper will not be installed until next June, so you have a year to mass produce the clears or we will book a flight to Europe and kidnapp your ass and bring you to the U.S. for you to do slave work on Celica customization, LOL!

[doGGy]

********************** UPDATE **********************











Worked 3 days on this project and finaly came up with the compleatly new prototipe, this will be the start for the compleatly new Custum build GT4 clear turns. As for now i made only one side, and still not compleatly finished, but after i finish the second side, the mold preparation will start and after few more weeks i will have compleatly new pair of turns, and mass production will begin

So keep checking guys

[Kadett]

Diamnz Dog! I mean Doggy. How the f*&k do you do that! Nice craftsmanship!!

[jgreening]

These are incredible. Great work Romas! I am in! GT2 Convertible, here I come.

[ScoobyDooCruiser]

There going to be a place for a screw too, right? They look sexy, I'm looking forward to getting my pair!

This post has been edited by ScoobyDooCruiser: Jun 16, 2005 - 12:39 PM

[hisashi94gtst204]

i'd like to see them on the car first.

[Andy_GTfour]

Very Good job! very very cool!!!!! i want front clear indicator! wait to Edo news!

bye

p.s. thanks for my gtfour raiser block and carbon cooling panel!

[GT4WRC]

So who would be interested then:
1)GT4WRC
2)
3)
4)
5)

[jgreening]

1)GT4WRC
2) jgreening
3)
4)
5)

[lagos]

id be down for a set

[presure2]

in

[shin]

how much? i'm interested lol.

[uzthedentist]

1)GT4WRC
2) jgreening
3) Uzthedentist
4)
5)

[ToyautoCentre]

1)GT4WRC
2) jgreening
3) Uzthedentist
4) Ian (toyauto centre)
5)

[dannygt4smith]

1)GT4WRC
2) jgreening
3) Uzthedentist
4) Ian (toyauto centre)
5) dannygt4smith

[GMAN1]

New kid
i will have some of that

[jgreening]

1)GT4WRC
2) jgreening
3) Uzthedentist
4) Ian (toyauto centre)
5) dannygt4smith
6) lagos
7) presure2
8) GMAN1

This post has been edited by jgreening: Jun 26, 2005 - 1:02 PM

[doGGy]

OMG........ guys WAIT!!!!!!!! THis week i need to finish god damn mold and start production, cuz otherwise i will get my arse kicked by all of you

[richgt4]

1)GT4WRC
2) jgreening
3) Uzthedentist
4) Ian (toyauto centre)
5) dannygt4smith
6) lagos
7) presure2
8) GMAN1
9) Richgt4

[PhilC]

1)GT4WRC
2) jgreening
3) Uzthedentist
4) Ian (toyauto centre)
5) dannygt4smith
6) lagos
7) presure2
8) GMAN1
9) Richgt4
10) PhilC
[right][snapback]305157[/snapback][/right]

[Jimbob30]

1)GT4WRC
2) jgreening
3) Uzthedentist
4) Ian (toyauto centre)
5) dannygt4smith
6) lagos
7) presure2
8) GMAN1
9) Richgt4
10) PhilC
11) Jimbob30

[Swifty205]

1)GT4WRC
2) jgreening
3) Uzthedentist
4) Ian (toyauto centre)
5) dannygt4smith
6) lagos
7) presure2
8) GMAN1
9) Richgt4
10) PhilC
11) Jimbob30
12) Iain (Swifty 205)

[Kadett]

How about some 94 Clear Turns for the GT

[doGGy]

Next on the list


As for the GT4 guys, the first pair of Turns should be ready by the mid of this week, so WOOOOO HOooooo, finally everything is moving

How about some 94 Clear Turns for the GT
[right][snapback]307868[/snapback][/right]

[jgreening]

Next on the list


As for the GT4 guys, the first pair of Turns should be ready by the mid of this week, so WOOOOO HOooooo, finally everything is moving

How about some 94 Clear Turns for the GT
[right][snapback]307868[/snapback][/right]

[right][snapback]307981[/snapback][/right]

YES!

[ToyautoCentre]

Any News on this fellas ? There gonna look so sweet in my new C-One Body Kit

[GT4WRC]

As for the GT4 guys, the first pair of Turns should be ready by the mid of this week, so WOOOOO HOooooo, finally everything is moving

Remember that my name is at the top of the list
Gary

[popstar]

put me down for number 14

i don't want the set between 12 and 14 thou, thanks

POPSTAR

[richgt4]

Any news on these?

Cheers,

Rich

[doGGy]

Guys, i took 2 weeks for vacation... but it seems like i cant even take one day off cuz im working and working.... Right now (today) first pair of turns is getting ready.

But still, mold need some adjustments to be made... cuz after the first pair it was damaged again (3 time in row ) So after the last fix of the mold everything will be just fine, cuz right now im correcting all the errors i made and will start on them ASAP...

Any news on these?

Cheers,

Rich
[right][snapback]314994[/snapback][/right]

[doGGy]

First pair IS DONE, finally. Pics TOMOROW


jgreening, PM me. Need to arange few things with ya.

Thanks

[doGGy]

First pair IS DONE, finally. Pics TOMOROW


jgreening, PM me. Need to arange few things with ya.

Thanks

[jgreening]

First pair IS DONE, finally. Pics TOMOROW


jgreening, PM me. Need to arange few things with ya.

Thanks
[right][snapback]316213[/snapback][/right]

PM sent.

[presure2]

WOOT
2 questions, romas.
do you take paypal?,
and
where and how much?

[doGGy]

ok, heres the update. Sorry what this is so late (i promissed pics WAYyyy before, but i was on holidays)

THe pics taken during the process so one turn still needs hole for bolt. Gonna test fit them tomorow or wednesday so i will post pics of them installed - if everything will be 100% they are making the production.

[lagos]

[jgreening]

looks good...can't wait to get them!

[doGGy]

Well, today i did a test fit for turns.... And it seems like i will have to start all over again with the turns.... cuz i made few mistakes when made the mold, and now turns do not fit as flush as i wanted .... Im kinda sad, cuz it took me soo long to make these, and too so much work and now everything is gone.....

well.... In the pics you wount see any inperfections, cuz they are small kinda, but i want to make this perfect as OEM. so.... everything will move on again, i will try to update the progress and this time make it right as it should be...

here are few pics:

[GMAN1]

I could live with those.i will buy that.anyone disagree?

[presure2]

gman, let doggy do his thing. if he's not happy with them, there is a reason.
doggy, too bad about this set, looks like just some very minor tweaks, im sure its not that easy tho..

[doGGy]

I do.

You cant see the whole fitting situation in pics... Turns sit way to deep, and the part what screws to the pumre aint flush at all and there is a gap between bumper and turn....

well, after weekend im gonna know how much time will take to make another mold and strat all over again, cuz now im might order compleat new mold from company who produces lots of plastic things..... this will depent how much money they will want for the mold and etc...

gonna se how it goes..

I could live with those.i will buy that.anyone disagree?
[right][snapback]320383[/snapback][/right]

[GMAN1]

i know its the wrong way to go about things but they look so sweet

im sorry people ive got my good head back on

i can wait

This post has been edited by GMAN1: Aug 4, 2005 - 8:06 PM

[jgreening]

Romas, any update on the new mold?

- Jay

[Magic]

Guys this is Great!!!!
Do we have a chance not sending our indicators???
Let me know guys....

[Mr_E]

Following with interest.....

[jgreening]

Romas, can we have an update on the new mold please? Thanks.

This post has been edited by jgreening: Aug 13, 2005 - 2:01 PM

[doGGy]

Jay, sorry for not responding, but this week for me was horible, cuz my GF granfather died so i had to be with her.....

About the new mold, we figured out how to take mold straight from the stock turns, now the only thing whats stops me from finishing the mold is the inside of the turns, need to find how to make the glass holding place perfectly and another few things... Might be the next week i will have another pair of new turn for test fitting..

Romas, can we have an update on the new mold please?  Thanks.
[right][snapback]323799[/snapback][/right]

[jgreening]

Thanks for the update Romas. Sorry to hear about your girl friend's grandfather. Please give my regards.

- Jay

[jgreening]

About the new mold... Might be the next week i will have another pair of new turn for test fitting..

update please. My car desperately needs some turn signals...

[doGGy]

Monday im getting firs pair of turns from new mold. Will need only to put glasses in them and they will be ready, no test fit will be needed cuz this time i did it 100% right and i know for sure, Jay, i will be sending them to ya the fastes way posible

About the new mold... Might be the next week i will have another pair of new turn for test fitting..

update please. My car desperately needs some turn signals...
[right][snapback]325588[/snapback][/right]

[jgreening]

Great!

[presure2]

anything new romas?

[doGGy]

This time they fitted. And fitted really good. Still need to adjust few things on the driver side turn (it sits not in the center, droped down a bit, cuz of the screw hole). But everything else is ok This means - mass production will soon begin

Jay, your turs are on your way, just PM me your address

[Coomer]

Nice work Romas! I wish I had a GT-Four bumper so I could buy some.

[presure2]

Romas, where do i send the $$ to?????

[GT4WRC]

Looking great. Can't wait to get my grubby mitts on a pair of these
Gary

[ToyautoCentre]

Any idea on turn around and ££ yet romas ?
My car is out of the body shop and waiting for some indicators,

[Mr_E]

Interested...

[doGGy]

Ok Guys, here is the answer to most of you i think

Well, i have to get a GT4 bumper in few days, so after this i will start the mass production cuz i will have a place (finally) Where to test them, and wount need to bug my friend about all this...

Production itself will be compleatly handmade. im using special type of plastic and building every single part of turns my self.... this takes time and i would have lots of pairs made in short period. But this is the only way to make them as perfect as they can be and for the lowest price...

Price for one pair SHIPPED will be 80$ (for euro people 70 euros (i know i know 80$ arent 70 euros but i have to charge more in Euros....... ) )

So stay tuned - i will soon have few pairs ready and let all of you know.

Thanks,
Romas

[GT4WRC]

Romas
You're doing am awesome job there.
As I'm top of the list just let me know where I need to send the $
Gary

[ToyautoCentre]

Sounds Great, Thanks for the update, i just need to buy some stock lamps untill these are ready

Ok Guys, here is the answer to most of you i think

Well, i have to get a GT4 bumper in few days, so after this i will start the mass production cuz i will have a place (finally) Where to test them, and wount need to bug my friend about all this...

Production itself will be compleatly handmade. im using special type of plastic and building every single part of turns my self.... this takes time and i would have lots of pairs made in short period. But this is the only way to make them as perfect as they can be and for the lowest price...

Price for one pair SHIPPED will be 80$ (for euro people 70 euros (i know i know 80$ arent 70 euros but i have to charge more in Euros....... ) )

So stay tuned - i will soon have few pairs ready and let all of you know.

Thanks,
Romas
[right][snapback]331026[/snapback][/right]

[Mr_E]

Price for one pair SHIPPED will be 80$ (for euro people 70 euros (i know i know 80$ arent 70 euros but i have to charge more in Euros....... ) )

Ouch.

Still interested. Give me an ETA and tell me where to send cash.

[ToyautoCentre]

Any news yet Romas ??

[Mr_E]

Any news yet Romas ??
[right][snapback]334423[/snapback][/right]

Hey man. If we're shipping bits over from the US, makes sense to use the same box perhaps....

See you Saturday to pick the car up. We can discuss then.

[ToyautoCentre]

Any news yet Romas ??
[right][snapback]334423[/snapback][/right]

Hey man. If we're shipping bits over from the US, makes sense to use the same box perhaps....

See you Saturday to pick the car up. We can discuss then.
[right][snapback]334516[/snapback][/right]

Well thats the idea
Depends how quick the guy in UK can make his also, all i know is i need as set within 3 weeks i dont care who they come from, i am not buying any more of tibor thats a fact

[GT4WRC]

Hey man.  If we're shipping bits over from the US, makes sense to use the same box perhaps....

Last time I looked at a world map, Lithuania was in Eastern Europe, not the US
Gary

[ToyautoCentre]

Hey man.  If we're shipping bits over from the US, makes sense to use the same box perhaps....

Last time I looked at a world map, Lithuania was in Eastern Europe, not the US
Gary
[right][snapback]334620[/snapback][/right]

Hes has to much money so he wants them sending to the UK via USA lol

[Mr_E]

Hey man.  If we're shipping bits over from the US, makes sense to use the same box perhaps....

Last time I looked at a world map, Lithuania was in Eastern Europe, not the US
Gary
[right][snapback]334620[/snapback][/right]

Mmmm. But, as Ian has pointed out, the shipping appears to be complex.

[doGGy]

pretty soon will have 4 pairs of signals for sale, 2 pairs reserved for 2 member of this site, 2 will be freely availible. Keep checking FS and this tread

[ToyautoCentre]

Great news, can you be more presice with times please? i really dont want to have to buy a set of stock indicators

[doGGy]

To be exact - till end of next week 2 sets will be done for sure.

Great news, can you be more presice with times please? i really dont want to have to buy a set of stock indicators 
[right][snapback]337401[/snapback][/right]

[ToyautoCentre]

To be exact - till end of next week 2 sets will be done for sure.

Can you just let me know as soon as possible that a set becomes available that i can have ?
I promise to include your name in the Magazine feature the car will have [Bribery/]

This post has been edited by ToyautoCentre: Sep 22, 2005 - 4:34 PM

[doGGy]

If you promise to send me a copy of the page there you will be saying this - then you might get your turns even faster Lol

To be exact - till end of next week 2 sets will be done for sure.

Can you just let me know as soon as possible that a set becomes available that i can have ?
I promise to include your name in the Magazine feature the car will have [Bribery/]
[right][snapback]337423[/snapback][/right]

[ToyautoCentre]

If you promise to send me a copy of the page there you will be saying this - then you might get your turns even faster Lol

Agreed

[Mr_E]

I think it's safe to say that once Ians car is finished and unleashed, it'll be in a few magazines pretty damn quickly.

It's rather special.

I'll say no more.

[dustin15brown]

any sneak peaks?

[ToyautoCentre]

Soon, ive just a few things to finish as in the fuel cell, fuel lines, oil cooler pipe work and to get the 3" ally intercooler piping back from the polishers after that the car will be ready, oh and a set of front INDICATORS Any News Yet Romas ???