Another 7afte celica, found him on club4ag.com Options

[nik]

http://www.cardomain.com/ride/2044631

i invited him to 6gc.net hopefully he comes

hes got a full TSI kit

[95CelicaST]

'tis lookin sexy

[playr158]

nice that makes the kit so much more tempting...due to ease
with minor adjustments

[94ST2]

I agree it just seems like it would be easier to modify the kit than buy all the parts yourself.

[celica3000]

hi,people my name is vitor i live in portugal ,i came the club 4ag (rataplan)
I want to know the best clutch and flyweel?
In the FUTURE I want to make the same mod equal to yours head G,
the rods in titaniun,valves,springs,new ecu etc...
but i live in lisbon and the parts i have to buy in net and shipping from states and the taxes is very hig

This post has been edited by celica3000: Sep 7, 2005 - 12:52 PM

[nik]

hi,people my name is vitor i live in portugal ,i came the club 4ag (rataplan)
I want to know the best clutch and flyweel?
[right][snapback]331705[/snapback][/right]

welcome to the site on my old 7afte set i used only one step above stock for my clutch and it did fine 170 whp and 180 trq but i would go stage 3 street/strip

[celica3000]

and the others not fine' (clutch master,A.C.T,EXEDY,UNORTHODOXY)

[nik]

and the others not fine' (clutch master,A.C.T,EXEDY,UNORTHODOXY)
[right][snapback]331712[/snapback][/right]

no i like ACT i'm using a 6puck ACT clutch on my 7agte
center force has a dual friction clutch
ExEdy i have heard good and bad things about
clutch master is good'
Unorthodoxy i dont know anyone using those clutchs

[nik]

here is the ACT 6 puck clutch im using in my built 7a bottom end

[playr158]

no titanium rods though
here are some nice forged ones from puater: http://www.atomicspeedware.com/pauttoy.htm

[nik]

no titanium rods though
here are some nice forged ones from puater: http://www.atomicspeedware.com/pauttoy.htm
[right][snapback]331717[/snapback][/right]

yeah these are beefy rods comparied to stock here are some more pic from my project








This post has been edited by nik: Sep 7, 2005 - 1:35 PM

[celica3000]

THANKS PLAYR58 AND NIK FOR THE LINK AND THEY ACCEPT PAYPAL GOOD VERY NICE
CAN YOU GET OBX SUPER FUEL INJECTION RAILS PART:CF009

This post has been edited by celica3000: Sep 7, 2005 - 2:02 PM

[nik]

THANKS PLAYR58 AND NIK FOR THE LINK AND  THEY ACCEPT PAYPAL GOOD VERY NICE  
CAN YOU GET OBX SUPER FUEL INJECTION RAILS PART:CF009
[right][snapback]331729[/snapback][/right]

http://www.obxracingsports.com/performance...=19&subCat2ID=2

$150 but i think its only 00+ celicas so no 7afe i wounder if it has the same injector spacing between the new and older 1.8L motor i'll have to look into it

This post has been edited by nik: Sep 7, 2005 - 3:04 PM

[DmVinny]

Do they happen to make a stronger crankshaft for the 7afe?

[playr158]

stock crank is plenty for whatever you can dish

[nik]

Do they happen to make a stronger crankshaft for the 7afe?
[right][snapback]331811[/snapback][/right]

there was a factory built 7afte i think only a few hundred were built i wish i could get ahold one to see if they changed much

but to answer your question No i was looking into the 4ag stoker crank as an alternative

theres one 300 horse 7agte 20v with a stock crank

i think fallenhero knew of some 400horse beast some where you would have to ask him

This post has been edited by nik: Sep 7, 2005 - 4:44 PM

[celica3000]

TOYOTA
CF009 Celica n/a 1.8L (all) n/a $149.00

obx site 1.8l all not year

parts data base i find for at 200 and fit

This fuel injection rail fits any celica equipped with the 1.8 liter 7A-FE engine.

This post has been edited by celica3000: Sep 8, 2005 - 2:12 AM

[playr158]

nice we got fuel rail!

[nik]

TOYOTA
CF009  Celica    n/a  1.8L (all)    n/a  $149.00

obx site      1.8l all not year

parts data base i find for at 200 and fit

  This fuel injection rail fits any celica equipped with the 1.8 liter 7A-FE engine.
[right][snapback]332026[/snapback][/right]

when i typed in celica obx fuel rail in to yahoo search to find a lower price all the sites have them listed as 1.8L 00+ celicas i would call obx just to make sure if so thats great

[celica3000]

NIK THE OBX MAKE THE FUEL RAIL TO CELICA ST 1994?

[nik]

NIK THE OBX MAKE THE FUEL RAIL TO CELICA ST 1994?
[right][snapback]332192[/snapback][/right]

if i get a sec i'll call them and 8000rpm redline you can probably disable the rev limit but why do you want to rev to 8000 fro the power is probably more dangerous to unless you build your motor and get some good fuel control for the extra rpms

[celica3000]

i have 2 more injectors and injector control unit by tsi and i can reprogram these injectors to get more fuel and the black box(pigi back) have maps to get more fuel in the others 4 injectors.
disable the rev limit as to obtain?

[nik]

i have 2 more  injectors and  injector control unit by tsi and i can reprogram these injectors to get more fuel and the black box(pigi back) have maps to get more fuel in the others 4 injectors.
disable the rev limit as to obtain?
[right][snapback]332452[/snapback][/right]

whats your stock red line mine was like 6200 rpm

[celica3000]

mine is 6800 rpm

[nik]

mine is 6800 rpm  
[right][snapback]332498[/snapback][/right]

ok so you need to get 1200 more rpm at this point i would go stand alone because your probably going to spend close to the same amount of money on your reprogram ecu as you would a stand alone ecu.

But if you still you want to stick with your stock ecu i'm not sure who can do that mod for you.

what psi or bar are you running? did you do any mods to your motor or just put the turbo kit on?

[celica3000]

i just put te turbo and my celica make 0,9 bar=13 or 14 psi

[nik]

i just put te turbo and my celica make 0,9 bar=13 or 14 psi
[right][snapback]332506[/snapback][/right]

have you dynoed your car yet?

[celica3000]

yes

[95CelicaST]

what were the specs from the dyno?

[celica3000]

i dont remember

[95CelicaST]

didn't they make a chart printout for you? Do you have a rough estimate?

[celica3000]

no

[nik]

do you know your bhp?

[celica3000]

220hp

[nik]

220hp
[right][snapback]332527[/snapback][/right]

was that to the wheels? did they give you graph or piece of paper like this







This post has been edited by nik: Sep 9, 2005 - 11:38 AM

[celica3000]

yes but i lost.can i reprogram the ecu ?
the obx make the fuel rail?

This post has been edited by celica3000: Sep 9, 2005 - 11:55 AM

[nik]

yes but i lost.can i reprogram the ecu ?
the obx make the fuel rail?
[right][snapback]332531[/snapback][/right]

i wrote an email to obx still waiting on a reply
as for the ecu i dont know maybe better piggy back that allows you to move the factory rev limit to 8000 not sure if piggy backs can do that

[celica3000]

ok nik thanks,and i wait for the obx

[celicast3sgte]

i dunno about toyotas but i know hondata has a chip s200 that can move rev limit and what not. i know a guy running a 9k redline on his RSX type-s.... and hes s/c, no dyno but he runs a mid-low 13 with major traction issues on stock 05' rims/tires and race gas.. 110 octane

[celica3000]

9k is to much for my engine
8k is good not damage the engine
i buy a new wheels miglia 17x7
wheels

This post has been edited by celica3000: Sep 10, 2005 - 2:53 AM

[nik]

well got a reply but not an answer here it is

Thank you for your inquiry. For retail sales, service, discounts and additional inquiries, please contact: www.tuningdepot.com Their phone number is: (650) 228-1461. Please ask for Eric or Jeff for special internet discount prices.

Thank you

Dave-OBX

so maybe player can call since his the GB king and get something started as for me i dont need the 7afe fuel rail because im using the 4ag rail instead

[playr158]

lol thanks nik i'm keeping outta GB's for now....

[celica3000]

thanks nik.
i call to obx