I have 3s-GTE fuel rail and injectors, Why won't they fit? Options

[Negative]

Same as topic ^^.
Why won't they fit?
I checked but could not find anything in the search for this.

[presure2]

what are you talking about? 5sfte? if so, 3s injectors and rail will not fit.

[Negative]

what are you talking about? 5sfte? if so, 3s injectors and rail will not fit.
[right][snapback]353153[/snapback][/right]

Yes - I sold my Caldina clip in favor of building a 5S-FTE and eventually a 5S-GTE (with a 3s Head etc. - I'm sure you know but just in case).
So I will be able to use them when I go 5S-GTE but not in the first stage of my project correct?
Will the injectors work in the 5S rail?

[lagos]

the 5s uses top feed injectors and rail. the 3s uses side feed. thats why u cant mix and match between the 2 motors

[presure2]

the 5s uses top feed injectors and rail. the 3s uses side feed. thats why u cant mix and match between the 2 motors
[right][snapback]353214[/snapback][/right]

also, the 5s injectors are high impedance, the 3s are low

[95celgt]

Use S5 RX-7 Primary's for your project(2010's) They are relatively cheap..and 460cc I think....can't remember, mine has 650cc primary's and 1200cc secondaries:O.

[scothaniel]

Or any DSM turbo injectors and a 3SGTE resistor pack.

[Negative]

Or any DSM turbo injectors and a 3SGTE resistor pack.

Thanks ya'll. I just found out my friend has 4 MKIV N/A Supra injectors he's willing to trade for my spare waste gate. This should work fine I'm told.
Thanks for the help and I'll just save these 3S ones for phase 2 of my project.

[lagos]

you mean the green tops?
those are too small. anyone who recomends them is going off old info that has been proven to be incorrect. get the rx7 injectors like everyone here is saying

This post has been edited by lagos: Nov 23, 2005 - 3:21 PM

[shin]

the MKIV NA supra injectors are 312cc... smaller than the 7MGTE injectors which are 315cc. you wouldn't want that. you'll be running to lean with either of those injectors. get the S5 RX7 injectors part# (195500-2010) like Art said.

[Negative]

Thanks ya'll.

[JoKeRkId613]

s5 rx-7. is there a sepcific year? i dont know much about rx7s and their generations. all i know is 93-97 is the nice one. lol. does it have to be twin turbo or are all rx7s the same? i think all rx7s are twin turbo so ignore that question if im wrong... lol. so these s5 rx7 injectors are the same ones everyone talking about, right? 460cc, ive heard. is there anything better from another car or manufacturer that you can get that are top feed high impedance? thanks.

[shin]

they are from the 88-91 RX7s. S5 is the series. they are 460cc top feed high impendance injectors. if you're gonna buy them. the part number is the 195500-2010. there's one that looks identical but is low impendance. you can always get RC engineering injectors but they will alot more expensive than the RX7 injectors.

[JoKeRkId613]

how much are the rx7 s5 injectors? each or altogether or whatever.

[JoKeRkId613]

what production car has the highest cc/best injectors? i see many people used to use supra injectors(not sure what years nor what cc) but most people now use rx7 injectors. i see some on ebay and they say 550cc, theyre top feed but dont know if theyre low or saturated.

[lagos]

what production car has the highest cc/best injectors? i see many people used to use supra injectors(not sure what years nor what cc) but most people now use rx7 injectors. i see some on ebay and they say 550cc, theyre top feed but dont know if theyre low or saturated.

like everyone has been saying ....get the rx7 injectors. avoid the supra ones.