6G Celicas Forums

Welcome Guest ( Log In | Register )

> All lighting finished, some pics.
post Dec 9, 2005 - 9:42 PM
+Quote Post
JFrost9



Enthusiast
****
Joined Aug 27, '05
From Texas
Currently Offline

Reputation: 0 (0%)




Hey, well i finally got all the bulbs in i ordered, and also the climate control (Thanks to WannabeGT4 on the fantastic job)... Thought id throw some pics out here and tell me what you think. They sent me the wrong front turn bulbs, so these are only temporary. The dome lights arent shown, but they are a faint blue also. Very calm looking.


-climate control-

-climate/clock/radio-

-entireinterior-

-sidemarkers/lowbeams-

front pic of car, cant really see the turns

Well tell me what you think.

This post has been edited by JFrost9: Dec 10, 2005 - 4:35 PM


--------------------
IPB Image
I am now a part of the ihavemorethen16gc club!
2 Pages V   1 2 >  
Start new topic
Replies (1 - 28)
post Dec 9, 2005 - 9:51 PM
+Quote Post
Tech9ine



Enthusiast
**
Joined Jun 28, '05
From MB, Canada
Currently Offline

Reputation: 1 (100%)




not too shabby, how long did that take you?
post Dec 9, 2005 - 9:55 PM
+Quote Post
JFrost9



Enthusiast
****
Joined Aug 27, '05
From Texas
Currently Offline

Reputation: 0 (0%)




which part? i had WannabeGT4 make the climate for me, cuz im soldering impared...and then it took me like 45 minutes to install the gauges, and then clock was like 5 minutes, and then the front turns took a few days to make...


--------------------
IPB Image
I am now a part of the ihavemorethen16gc club!
post Dec 9, 2005 - 10:15 PM
+Quote Post
Tech9ine



Enthusiast
**
Joined Jun 28, '05
From MB, Canada
Currently Offline

Reputation: 1 (100%)




that'll do it, right on man, looks good.
post Dec 9, 2005 - 11:18 PM
+Quote Post
WannabeGT4



Enthusiast
*****
Joined Oct 10, '03
From Wichita, KS
Currently Offline

Reputation: 5 (100%)




Awesome. Glad you like the climate control. It looks alot better in real life than it does in that pic. Here is the picture I took of it. I think it's a little closer to the real thing:
user posted image


--------------------
IPB Image
Project ST204.5 99.88946% complete...
post Dec 9, 2005 - 11:34 PM
+Quote Post
snapshotgt



Enthusiast
*****
Joined Oct 12, '05
From Texas
Currently Offline

Reputation: 59 (100%)




nice jfrost // plannin' on doin gthe same w/all my gauges (minus the glow gauges...going to reaplace stock bulbs w/leds)

later.

~snap



This post has been edited by snapshotgt: Dec 10, 2005 - 2:07 PM


--------------------
Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJ
Current: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor
post Dec 9, 2005 - 11:52 PM
+Quote Post
DeW_H0e_GT



Enthusiast
*****
Joined Mar 9, '05
From Oakland, Cali
Currently Offline

Reputation: 46 (100%)




looks nice.....

BTW, i have the same EXACT stereo... biggrin.gif


--------------------
post Dec 10, 2005 - 12:00 AM
+Quote Post
JFrost9



Enthusiast
****
Joined Aug 27, '05
From Texas
Currently Offline

Reputation: 0 (0%)




lol actually snap it was all directly plugged in like normal... no tapping, just some soldering... The stereo is ok, ive had it for awile now, and it does its job... yea snap i was thinking about adding some red bulbs to the back of the guages, cuz it kinda leaks through... and it would be cool to have the needles and odometer be red...havent done it yet though.


--------------------
IPB Image
I am now a part of the ihavemorethen16gc club!
post Dec 10, 2005 - 12:07 AM
+Quote Post
snapshotgt



Enthusiast
*****
Joined Oct 12, '05
From Texas
Currently Offline

Reputation: 59 (100%)




cool // i'll have to post pics when mine are done...i'll be ordering the bulbs in the next day or so...

i should come visit you and check 'em out in real life! LOL...

~snap

(edit) have just bought tons of LEDs for my cabin....will post pics once installed!

This post has been edited by snapshotgt: Dec 10, 2005 - 3:09 AM


--------------------
Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJ
Current: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor
post Dec 10, 2005 - 2:18 AM
+Quote Post
djultimate



Enthusiast
*
Joined Dec 1, '05
From South Windsor, CT
Currently Offline

Reputation: 0 (0%)




lookin good!


--------------------
post Dec 10, 2005 - 3:29 AM
+Quote Post
celiracer



Enthusiast
*****
Joined Oct 5, '05
From NE
Currently Offline

Reputation: 6 (100%)




This pic. is done off my crapy camera. So it doesn't look to good. Anyways this is without my White LED bulbs and with stock white bulbs. Got my LEDs coming this weekend hopefully.
user posted image


--------------------
IPB Image
post Dec 10, 2005 - 4:23 PM
+Quote Post
JFrost9



Enthusiast
****
Joined Aug 27, '05
From Texas
Currently Offline

Reputation: 0 (0%)




i like that...see i have the reverse glow guages, so those will stay blue, but i was thinking i could throw some red bulbs in there , and make the odometer and needles red. Ill post pics later tonight when im done...


--------------------
IPB Image
I am now a part of the ihavemorethen16gc club!
post Dec 10, 2005 - 4:26 PM
+Quote Post
celiracer



Enthusiast
*****
Joined Oct 5, '05
From NE
Currently Offline

Reputation: 6 (100%)




Ya i think that would look good. the only reason i made mine red with white needles is because all my interior exterior is gonna be red and black.


--------------------
IPB Image
post Dec 10, 2005 - 4:38 PM
+Quote Post
JFrost9



Enthusiast
****
Joined Aug 27, '05
From Texas
Currently Offline

Reputation: 0 (0%)




QUOTE(WannabeGT4 @ Dec 9, 2005 - 11:18 PM) [snapback]365472[/snapback]

Awesome. Glad you like the climate control. It looks alot better in real life than it does in that pic. Here is the picture I took of it. I think it's a little closer to the real thing:



Well i just realized that i actually had the little nob on the side turned down practically all the way...thats why it came out so faint. I have it turned down because my guages look funny (due to backlighting) with the nob turned up fully...But the CC still looks great no matter where i have the nob at.


--------------------
IPB Image
I am now a part of the ihavemorethen16gc club!
post Dec 10, 2005 - 9:42 PM
+Quote Post
WannabeGT4



Enthusiast
*****
Joined Oct 10, '03
From Wichita, KS
Currently Offline

Reputation: 5 (100%)




QUOTE(JFrost9 @ Dec 10, 2005 - 3:38 PM) [snapback]365624[/snapback]

QUOTE(WannabeGT4 @ Dec 9, 2005 - 11:18 PM) [snapback]365472[/snapback]

Awesome. Glad you like the climate control. It looks alot better in real life than it does in that pic. Here is the picture I took of it. I think it's a little closer to the real thing:



Well i just realized that i actually had the little nob on the side turned down practically all the way...thats why it came out so faint. I have it turned down because my guages look funny (due to backlighting) with the nob turned up fully...But the CC still looks great no matter where i have the nob at.


Oh, Ok. I just wanted to make sure people knew that it was brighter than that in case they wanted me to do theirs for them.


--------------------
IPB Image
Project ST204.5 99.88946% complete...
post Dec 16, 2005 - 12:24 AM
+Quote Post
Punch



Enthusiast
****
Joined Jan 29, '04
From Brooklyn moved to Miramar Florida
Currently Offline

Reputation: 2 (100%)




thats hott I will do the same ...
post Dec 16, 2005 - 2:01 AM
+Quote Post
Batman722



Enthusiast
*****
Joined Mar 8, '04
From Newport, RI
Currently Offline

Reputation: 63 (99%)




JFrost, what LEDs (bulbs) did you use for the CC backlighting ? (the 3)


--------------------
post Dec 16, 2005 - 8:50 AM
+Quote Post
WannabeGT4



Enthusiast
*****
Joined Oct 10, '03
From Wichita, KS
Currently Offline

Reputation: 5 (100%)




QUOTE(Batman722 @ Dec 16, 2005 - 1:01 AM) [snapback]367873[/snapback]

JFrost, what LEDs (bulbs) did you use for the CC backlighting ? (the 3)


I did the CC for him. Each button is individualy backlit. The two bulbs on the left side of the unit that backlight the knobs were replaced with 4 LEDs. Two LEDs in each bulb location angled properly to create as uniform lighting as possible. The bulb that was in the right side of the unit isn't needed since it's only function was for backlighting the re-circulation and AC buttons.

This post has been edited by WannabeGT4: Dec 16, 2005 - 2:02 PM


--------------------
IPB Image
Project ST204.5 99.88946% complete...
post Dec 17, 2005 - 5:52 PM
+Quote Post
snapshotgt



Enthusiast
*****
Joined Oct 12, '05
From Texas
Currently Offline

Reputation: 59 (100%)




i'm looking for a LED for my window switch . . . looked around quite a bit, and can't find what i need (3v/3mm/500mcd) . . . any suggs?

(looked at 2 local radio shacks/ebay(they only sell in huge quantities...))

anyway suggs?

...btw, i'm looking for BLUE...

~snap


--------------------
Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJ
Current: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor
post Dec 17, 2005 - 6:08 PM
+Quote Post
Cutrara



Enthusiast
*****
Joined May 6, '05
From PA
Currently Offline

Reputation: 4 (100%)




QUOTE(snapshotgt @ Dec 17, 2005 - 5:52 PM) [snapback]368385[/snapback]

i'm looking for a LED for my window switch . . . looked around quite a bit, and can't find what i need (3v/3mm/500mcd) . . . any suggs?

(looked at 2 local radio shacks/ebay(they only sell in huge quantities...))

anyway suggs?

...btw, i'm looking for BLUE...

~snap


That 3v/3mm/500mcd seems good. I just used what I had lying around. 3v/5mm/5000mcd. It's so bright, I don't really like it.


--------------------
hey, nice mod does it come in hetero?


Need parts? I'm parting out a '94 ST
post Dec 17, 2005 - 7:58 PM
+Quote Post
snapshotgt



Enthusiast
*****
Joined Oct 12, '05
From Texas
Currently Offline

Reputation: 59 (100%)




QUOTE(Cutrara @ Dec 17, 2005 - 6:08 PM) [snapback]368392[/snapback]

QUOTE(snapshotgt @ Dec 17, 2005 - 5:52 PM) [snapback]368385[/snapback]

i'm looking for a LED for my window switch . . . looked around quite a bit, and can't find what i need (3v/3mm/500mcd) . . . any suggs?

(looked at 2 local radio shacks/ebay(they only sell in huge quantities...))

anyway suggs?

...btw, i'm looking for BLUE...

~snap


That 3v/3mm/500mcd seems good. I just used what I had lying around. 3v/5mm/5000mcd. It's so bright, I don't really like it.


what would u suggest?

. . . i'll be buying it . . . so i can get anything . . .

~snap

EDIT: LOL, you already said biggrin.gif . . .

This post has been edited by snapshotgt: Dec 17, 2005 - 8:13 PM


--------------------
Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJ
Current: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor
post Dec 20, 2005 - 12:51 AM
+Quote Post
blaque_6thGen

Enthusiast
*
Joined Jun 18, '04
From Rio Grande Valley, TX
Currently Offline

Reputation: 0 (0%)




hey, ummm....i'm not sure. but aren't blue turn signals illegal? i know that i was planning on putting thme on mine, but then a friend told me that i shouldn't because the cops wouldn't like that too much. of course, the law is different in each state....just wondering?


--------------------
user posted image

this is what happens when your little brother is better at photoshop than you are
post Dec 20, 2005 - 1:17 AM
+Quote Post
Batman722



Enthusiast
*****
Joined Mar 8, '04
From Newport, RI
Currently Offline

Reputation: 63 (99%)




QUOTE(blaque_6thGen @ Dec 20, 2005 - 12:51 AM) [snapback]369194[/snapback]

hey, ummm....i'm not sure. but aren't blue turn signals illegal? i know that i was planning on putting thme on mine, but then a friend told me that i shouldn't because the cops wouldn't like that too much. of course, the law is different in each state....just wondering?

inside, one the gauge cluster wink.gif not outside the car


--------------------
post Dec 20, 2005 - 1:36 AM
+Quote Post
blaque_6thGen

Enthusiast
*
Joined Jun 18, '04
From Rio Grande Valley, TX
Currently Offline

Reputation: 0 (0%)




QUOTE(Batman722 @ Dec 20, 2005 - 6:17 AM) [snapback]369205[/snapback]

QUOTE(blaque_6thGen @ Dec 20, 2005 - 12:51 AM) [snapback]369194[/snapback]

hey, ummm....i'm not sure. but aren't blue turn signals illegal? i know that i was planning on putting thme on mine, but then a friend told me that i shouldn't because the cops wouldn't like that too much. of course, the law is different in each state....just wondering?

inside, one the gauge cluster wink.gif not outside the car


i meant these tongue.gif

user posted image

oh, and i just realized that we are from the same state....

This post has been edited by blaque_6thGen: Dec 20, 2005 - 1:38 AM


--------------------
user posted image

this is what happens when your little brother is better at photoshop than you are
post Dec 20, 2005 - 1:37 AM
+Quote Post
snapshotgt



Enthusiast
*****
Joined Oct 12, '05
From Texas
Currently Offline

Reputation: 59 (100%)




QUOTE(Batman722 @ Dec 20, 2005 - 1:17 AM) [snapback]369205[/snapback]

QUOTE(blaque_6thGen @ Dec 20, 2005 - 12:51 AM) [snapback]369194[/snapback]

hey, ummm....i'm not sure. but aren't blue turn signals illegal? i know that i was planning on putting thme on mine, but then a friend told me that i shouldn't because the cops wouldn't like that too much. of course, the law is different in each state....just wondering?

inside, one the gauge cluster wink.gif not outside the car


WORD! // sorry, i was meaning to say in the interior (where you see the green arrows...)

~snap

EDIT: yeah, i would personally not go w/blue turns // not my style //

This post has been edited by snapshotgt: Dec 20, 2005 - 1:38 AM


--------------------
Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJ
Current: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor
post Dec 20, 2005 - 2:00 AM
+Quote Post
blaque_6thGen

Enthusiast
*
Joined Jun 18, '04
From Rio Grande Valley, TX
Currently Offline

Reputation: 0 (0%)




yeah, i knew what you were saying snap...i was just wondering about jfrost's turns. no biggie tho


--------------------
user posted image

this is what happens when your little brother is better at photoshop than you are
post Dec 20, 2005 - 5:21 PM
+Quote Post
deliriouzgtfour



Enthusiast
**
Joined May 15, '03
From So Cal,CA
Currently Offline

Reputation: 1 (100%)




im having trouble with the interior colors...i tried using the index divider tab for the clock display, but its giving me a pigment of light blue when i put in a red tab behind the screen. Also does anyone have instructions or a how to for the interior lights..ie. climate, dash, etc...thanks a bunch.. i want to do it right before i break anything again...
post Dec 20, 2005 - 5:40 PM
+Quote Post
blaque_6thGen

Enthusiast
*
Joined Jun 18, '04
From Rio Grande Valley, TX
Currently Offline

Reputation: 0 (0%)




QUOTE(deliriouzgtfour @ Dec 20, 2005 - 10:21 PM) [snapback]369432[/snapback]

im having trouble with the interior colors...i tried using the index divider tab for the clock display, but its giving me a pigment of light blue when i put in a red tab behind the screen. Also does anyone have instructions or a how to for the interior lights..ie. climate, dash, etc...thanks a bunch.. i want to do it right before i break anything again...


check the sticky...they are pretty helpful.


--------------------
user posted image

this is what happens when your little brother is better at photoshop than you are
post Dec 20, 2005 - 5:46 PM
+Quote Post
JFrost9



Enthusiast
****
Joined Aug 27, '05
From Texas
Currently Offline

Reputation: 0 (0%)




just thought id add this, the turns are actually hyper white, but they came out blue in the picture..they do have a blue tint to them, but arent near as blue as it shows there...


--------------------
IPB Image
I am now a part of the ihavemorethen16gc club!

2 Pages V   1 2 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 10th, 2025 - 2:10 PM