I need answers please., i did my research. Options

[sugarfree]

I have a 96GT automatic. Im wanting to swap over to a 3sgte so that means i will have to go with a manual transmission. Im goin to go with a e153. And im going to use mr2 inner axels with V6 camry outers. So im going to order a MR2 clip. So far i did some research on it for a while using this forum. I will need mounts from an St205 because i dont want to weld. Are these mounts for the transmission or the motor? I have the part numbers on that, but if i get all ST205 mounts, does that mean i get rid of the GT mounts? Supersprynt said i will need an alternator bracket and shifter cables from the ST185 right? On the shifter cables i thought i could use GT shifter cables. Well here is all the part numbers and parts i need for this swap, is there anything else that i am missing?


12361-74340.......... Insulator.......... $47.10
12371-74440.......... Insulator.......... $88.00
12372-74500.......... Insulator.......... $109.00

12311-74160.......... Bracket, EN.......... $40.00
12321-74310.......... Bracket, EN.......... $26.00
12325-74230.......... Bracket, EN.......... $53.00

33820-2B350.......... Shift Cables.......... $341.00

I ordered these through Champion Toyota and were all a special order from Japan. Those are the list prices for those items.

(713)943-7010 Direct Parts Line

TRANSMISSION SWAP:
-Shifter
-Clutch Master cylinder
-Slave cylinder
-Clutch metal fluid lines
-Rubber clutch line
-Clutch pedal assembly
-Manual brake pedal (just the pedal because John told me you dont need the whole assembly)
-Manual Transmission Drivers Side Mount
-Starter Relay for Manual
-2 bolts for Trans- 12 by 1.25 (1 is 65mm other is 75mm)

Can someone confirm me?

[95CelicaST]

If you have a GT you don't NEED to change motor mounts.

[Dr_Tweak]

He wants the E153, so yeah he does.

[presure2]

I have a 96GT automatic. Im wanting to swap over to a 3sgte so that means i will have to go with a manual transmission. Im goin to go with a e153. And im going to use mr2 inner axels with V6 camry outers. So im going to order a MR2 clip. So far i did some research on it for a while using this forum. I will need mounts from an St205 because i dont want to weld. Are these mounts for the transmission or the motor? I have the part numbers on that, but if i get all ST205 mounts, does that mean i get rid of the GT mounts? Supersprynt said i will need an alternator bracket and shifter cables from the ST185 right? On the shifter cables i thought i could use GT shifter cables. Well here is all the part numbers and parts i need for this swap, is there anything else that i am missing?


12361-74340.......... Insulator.......... $47.10
12371-74440.......... Insulator.......... $88.00
12372-74500.......... Insulator.......... $109.00

12311-74160.......... Bracket, EN.......... $40.00
12321-74310.......... Bracket, EN.......... $26.00
12325-74230.......... Bracket, EN.......... $53.00

33820-2B350.......... Shift Cables.......... $341.00

I ordered these through Champion Toyota and were all a special order from Japan. Those are the list prices for those items.

(713)943-7010 Direct Parts Line

TRANSMISSION SWAP:
-Shifter
-Clutch Master cylinder
-Slave cylinder
-Clutch metal fluid lines
-Rubber clutch line
-Clutch pedal assembly
-Manual brake pedal (just the pedal because John told me you dont need the whole assembly)
-Manual Transmission Drivers Side Mount
-Starter Relay for Manual
-2 bolts for Trans- 12 by 1.25 (1 is 65mm other is 75mm)

Can someone confirm me?

id reccomend NOT getting a mr2 clip. it will make things ALOT harder if you dont already have a 3s to take parts off of.
the mr2 3s has the alternator on the back of the motor, ect...diffrent waternecks..you'll need to source all these parts if you get an mr2 clip. and the biggest problem is the wiring is diffrent.

[sugarfree]

Cool thanks. So if i decide to order a gt4 clip, then i have to find a e153 from a solara or another MR2 right? If was going to go with a Solara tranny, then the hybrid axels would be solara/camry?