Refurb or Fix?? Options

[o0black0o]

I'm wonder if it could be possible to refurbish or complety fix my front bumper cover. If so would it be cheaper to just rebuy or rebuild it?

Check it - http://photobucket.com/albums/y166/o0black...nt=DSCI0004.jpg

[Fate]

well first off take off your front bumper completely. since it's plastic it should reshape after having all pressure released off it. then figure out what you want to do. i replaced mine completely when mine was way worse. yours looks like an easy fix so if you need anything, it would be a heat gun.

This post has been edited by Fate: Dec 29, 2005 - 5:08 PM

[o0black0o]

I took it off, it didn't pop out. I like bent it back a little bit but it stills sitting there. I need to take picture of the damage to the support and all. It is ok to have the support off. i know some of the OEM type covers you must take it off the the c-one.

[Fate]

This was my damage...

[o0black0o]

My hood is not set right. I don't know if its because it was pushed back or if it was bent in a certain spot. You saw the picture of my cover. My Passager Side High Beam Lamp brackets are broken, I took out the lamp and the balancer just flew out.. My Bumper Support Beam on the passager side is completey mashed inward, Looks like some blowtorch **** is gonna be needed... The front metal frame that holds the cover on strait is mashed, I bent it back a bit so It won't look so kookie, Imma get some pictures of it soon 2 show ya.

EDIT: I had 2 accidents never fixed the first one and I had the 2nd one about 6 months after. Here is the pictures from the first.

http://photobucket.com/albums/y166/o0black...ca%20Incidents/

So add about x2 more damage from those.

This post has been edited by o0black0o: Dec 30, 2005 - 1:41 PM

[o0black0o]

Here is the 2nd accident pictures.

http://photobucket.com/albums/y166/o0black...2/?sc=1&multi=5

Can anyone tell me off the bat what I might need. Im confused at the parts.