 ebay shifter, need help |
 Jan 16, 2006 - 10:49 PM
|
 
|
 Enthusiast  Joined Dec 22, '05 From STL Currently Offline Reputation: 0 (0%)  |
Well I bought a 7th gen Celica shifter off of ebay and put it in today. I took the clip off (the one holding the pin in front of the shifter) and it broke. Does any one know where I can get one. Also I never used the shift mechanism lifters. I could not get my hand in the space and the bolts supplied by the kit were not long enough. This is the best $30 I have spent on my car but I put the lifters in will it make it a smother shift. Thanks in advance for any help.
-------------------- 7a-fte in progress
still need a manifold, fuel pump, greddy e-manage, and oil lines / water lines |
 |
Replies
(1 - 7)
|
Jan 17, 2006 - 12:04 AM
|
|
 Enthusiast Joined Dec 1, '05 From South Windsor, CT Currently Offline Reputation: 0 (0%) |
i drilled a tiny hole through the pin and stuck a small nail through it and bent the nail so it wouldnt come out.
-------------------- |
|
Jan 17, 2006 - 12:18 AM
|
|
 Enthusiast Joined Oct 10, '05 From San Diego Currently Offline Reputation: 2 (100%) |
scroll down to batman's second post
BAM ---> http://www.6gc.net/forums/index.php?showtopic=22975&st=20 i didnt put the lifters in at first and the bottom cup rubbed on the floor. so i put the back two in and it was perfect. it took a while because it was hard to get my hand in there. i think i held them in place with pliers This post has been edited by dlx742: Jan 17, 2006 - 12:19 AM |
|
Jan 17, 2006 - 11:08 AM
|
|
 Enthusiast Joined Jun 1, '03 From WV Currently Offline Reputation: 2 (100%) |
Can I re-use my stock knob with the 7th gen shifter?
-------------------- Live Free, Be Happy
 |
|
Jan 17, 2006 - 11:49 AM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
QUOTE(Bigmeanbulldog55 @ Jan 17, 2006 - 11:08 AM) [snapback]379827[/snapback] Can I re-use my stock knob with the 7th gen shifter? yes -------------------- |
|
Jan 17, 2006 - 1:03 PM
|
|
|
Enthusiast Joined Dec 22, '05 From STL Currently Offline Reputation: 0 (0%) |
That is a good idea about the pin and drilling a holl. As far as i can tell the shifter is not hiting the floor but i will put the spacers in anyways when have time, it can't hurt. thanks for the help.
-------------------- 7a-fte in progress
still need a manifold, fuel pump, greddy e-manage, and oil lines / water lines |
|
Jan 17, 2006 - 3:57 PM
|
|
 Enthusiast Joined Jan 16, '06 From Lima, ohio Currently Offline Reputation: 0 (0%) |
im new so this may be a dumb question but the 7th gen shifters will work on a 6th gen without modding??
|
|
Jan 17, 2006 - 4:17 PM
|
|
 Enthusiast Joined Jul 7, '04 From Germantown, WI Currently Offline Reputation: 0 (0%) |
QUOTE(lilsteeg @ Jan 17, 2006 - 2:57 PM) [snapback]379937[/snapback] im new so this may be a dumb question but the 7th gen shifters will work on a 6th gen without modding?? Correct |
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 8:01 AM |