 intake breather, question |
 Feb 6, 2006 - 10:36 AM
|
 
|
 Enthusiast  Joined Nov 22, '03 From Tracadie-Sheila, NB (Canada) Currently Offline Reputation: 14 (100%)  |
ok I have an intake and want to know where tu plug my breather tube
I know some ppl plug it to the valve cover, but my valve cover breather is already plugged to the throttle body (with a stock tube). So i would like to know is it ok if I remove the tube and just fill the intake breather "tit" with tape or is it better to plug it to the valve cover and fill the TB breather hole with something? I also heard that there's another stock breather tube from behind the engine...should I plug my breather there? if it's the case, can someone show me where's that tube located? TIA |
 |
Replies
(1 - 2)
|
Feb 6, 2006 - 11:05 AM
|
|
 Enthusiast Joined Dec 28, '05 From USA Currently Offline Reputation: 0 (0%) |
i wouldn't mess with that and put in a breather if the car is not for show and you still need a reliable car, i've heard of people losing mpg when you add a breather and other misc. stuff happening to the car
This post has been edited by pure_dx: Feb 6, 2006 - 11:05 AM |
|
Feb 7, 2006 - 11:34 AM
|
|
 Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
Yeah the little breather extention on my intake was just covered with a small tube and left. Runs perfect, no problems.
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
 I'm not really an asshole, but I play one on the internet. **** Photobucket |
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 18th, 2025 - 3:36 PM |