Test fit my 2-post., Pics inside. Options

[celiracer]

Hey guys just test fitted my wing today. I have pics
and wanna know what everyone thinks.

Does this gap close when you screw them screws from the block to the wing?
Didn't want to do everything till its painted.


Then i have these three holes that i need to shave.




And here are three pics of what it looked like on my car. Let me know what
you guys think.





I also have a C-one replica Front, 404 sides, and 404 rear
that are getting put on with my car getting re-painted.

[fastcelica20]

looks hot man! but lower your car a bit. good job!

[Valo666]

nice..you get the blocks from romas?? i wanted 2 order a set, but i was 2 late you keepin the car red? or you gonna re-paint it?

[celiracer]

Yea its getting lowered 1 1/2 inches. with the kit. I am keeping it the same red.

[DSRT-FX]

can't wait to see them on mate, are you going to spray the raiser blocks black on match them red? im going for the same look aswell although having to drill more holes and reshave the existing 3-post wing holes seems to be abit much for me only time and money will tell hehe.. good luck... just a question does the 2-post wing cover the existing 3-post wing holes at all? i know the pics show they don't but is it very obvious? -R

[celiracer]

I'm painting everything red. And with the 3-post spoiler stock you have to shave the middle and the one hole and each side also have to drill an extra hole on each side for the other bolt.

Did anyone else have a gap in the inside part, where the block and spoiler connect?

This post has been edited by celiracer: Apr 23, 2006 - 7:56 PM

[ThAixGuYx2k7]

DO IT!

[celiracer]

My biggest question is. Since i have the gaps on each side like on the first pic how would i go about fixing that and making it flush??

[bloodrain]

My biggest question is. Since i have the gaps on each side like on the first pic how would i go about fixing that and making it flush??

lots and lots of bondo and sanding, thats what i did. BTW i like ur rotors and calipers

[celicarus]

are those 18's or 19's -- ?

[celiracer]

They are 18's And bloodrain yours was like that also? thats the gay thing im no good at bondo lol. But i guess i gotta learn lol.

[lagos]

did you drill a new hole on each side?


for my car, i didnt shave any of the holes. i just usde black caps to cover them up. it came out looking good. the only hard part was cleaning off that glue that used to be on there.

[celiracer]

Well first off my cars getting re-painted so im shaving the holes that are needed to be shaved plus the sprayer nozzle, and antenna.

I didn't drill the second hole yet. I just put the bold on the back side and put the spoiler on top of it. Just to see how it looked and everything. going to drill the hole and stuff right before it goes into the shop.

[lagos]

oh ok ..sounds good.

its really not too hard going from a 3post to a 2. just a little more work to get it done.

[celiracer]

Thanks for the info Lagos. but did you have that gap problem like my 1st pic? and where would i put the bondo? on the block to try and get it to go farther to the wing? or just put the screws in to hope it closes?

[CelicaZR]

I would like to know how it turns out Celiracer
Cause I plan to buy the same spoiler.

[celiracer]

ok. I'm waiting on my kit. and once that gets here it will be fitted and the wing will get done also. Thanks everyone for their comments and i hope i can get this together and don't have to worry about that gap once the bolts and screws are all on it.

[lagos]

there shouldnt be any gaps. did u cut off the little part that sticks out on the oem spoiler? you have to cut that off for it to sit flush with the blocks. then use some doubble sided tape, and some screws to hold it all in place

[celiracer]

Lagos do you have any pics of what you have to cut off on the spoiler? I didn't know you had to cut anything off.

[celiracer]

Lagos if you can could you show me a pic of what you cut off the spoiler?

[celiracer]

Does anyone have pics of there 2-post with blocks of the inside like my first pic? Mine is really gapped. And i know i'm gonna probably have to bondo it up to look better but i wanna know how everyone else's look like. in that area.

[j0e_p3t]

looks good dude. can't wait to see it all done. btw... would you wanna sell your stock bumper to me?

[celiracer]

Thanks man. I can't sell the bumper because im already givin it to Hitcachi. But i could posibly be selling a silver 96+ front bumper i'll let you know when everythings finished.

[j0e_p3t]

thanks man. i'm interested in any colored 96+ bumper i can get cheaper than at the toyota dealer. and sorry, didn't mean to jack your thread. and did i mention how sexy your car's gonna look?

[Defgeph]

Does anyone have pics of there 2-post with blocks of the inside like my first pic? Mine is really gapped. And i know i'm gonna probably have to bondo it up to look better but i wanna know how everyone else's look like. in that area.

You should try bolting the blocks on the spoiler. I have never noticed a gap with blocks before.
Where did you buy these from ?

[celiracer]

i bought them from doggy.

[Defgeph]

They should fit with out a gap if Doggy made them. Bolt the blocks to the spoiler, then fit the whole thing to the car.

[celiracer]

Thats what im gonna do. when i get my kit. And see if it loses that gap. (i hope so anyways)

[doGGy]

On the spoiler inside there they go on the blocks - there are 2 small pins, you have to cut them out and flush the surface or otherway you will have the gaps like you do now. BTW, i tested these blocks on my SSIII before sending them to you and they there perfect fit. Remove the spoiler off the cer, place it on upside down - and then try to add the blocks to it and take a look what is getting in a way to lay them flush.

[celiracer]

Doggy i know its not the blocks i bot the 2-post from a company on e-bay it was a replica 2-post so i know i gotta do some work to the wing itself. But when i put the blocks on the wing then put the blocks on the car i think it might fix it.

I don't have the 2 pins on each side of the wing.

This post has been edited by celiracer: Apr 27, 2006 - 12:21 PM