![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Apr 6, '05 From homosassa,florida Currently Offline Reputation: 0 (0%) ![]() |
my friend has a srt4 and he is selling his wheels,theyre not stock,i think theyre foose. we put them on my car while it was jacked up and they seemed to fit fine i was just wondering anyone think ill run into any problems with them,my car is lowered by a eibach sportline package.any feedback would be appriciated
-------------------- FOR 21 YEARS I DEALT WITH THE RAIN,
ONLY TO FIND OUT THAT I COULD STOP THE PAIN, SO NOWITZON!!! |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
There are many people with sportline springs running 18" wheels, so 17" will not be a problem. As long as the bolt pattern is 5X100 and the offset isn't too terrible it should work just fine. Ideal offset would be +35. That would be flush with the body, but people have different offsets. My rims are +42, which makes them sit in a little bit, but don't get anything lower than +35, as that would stick out from the side, like an ugly trash lowrider.
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() |
|
![]() Enthusiast ![]() Joined Apr 6, '05 From homosassa,florida Currently Offline Reputation: 0 (0%) ![]() |
theyre actually a tiny bit thinner than my tires but trhyre taller is theyre that much room in the wheel well?
-------------------- FOR 21 YEARS I DEALT WITH THE RAIN,
ONLY TO FIND OUT THAT I COULD STOP THE PAIN, SO NOWITZON!!! |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 12, '03 From Portland , Oregon , United States Currently Offline Reputation: -1 (33%) ![]() |
I seem to recall that they are 5x114 because my buddy sold his SRT4 wheels to my other friend with a RX7.
DTE -------------------- I am a thief.
do not buy anything from me. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jan 16, '06 From Lima, ohio Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(Clipsetuner @ May 2, 2006 - 6:05 PM) [snapback]429205[/snapback] I seem to recall that they are 5x114 because my buddy sold his SRT4 wheels to my other friend with a RX7. DTE wouldnt the offstets be off due to the diff in fwd-rwd |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 12, '03 From Portland , Oregon , United States Currently Offline Reputation: -1 (33%) ![]() |
QUOTE(lilsteeg @ May 3, 2006 - 12:51 AM) [snapback]429253[/snapback] QUOTE(Clipsetuner @ May 2, 2006 - 6:05 PM) [snapback]429205[/snapback] I seem to recall that they are 5x114 because my buddy sold his SRT4 wheels to my other friend with a RX7. DTE wouldnt the offstets be off due to the diff in fwd-rwd Most of the time you can make them work either way, if there a genearl offest. DTE -------------------- I am a thief.
do not buy anything from me. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
QUOTE Most of the time you can make them work either way, if there a genearl offest. Maybe the wheel this guy has is 5-lug universal. -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 20, '03 From Annapolis, Md Currently Offline Reputation: 5 (100%) ![]() |
QUOTE(95CelicaST @ May 3, 2006 - 2:42 AM) [snapback]429394[/snapback] QUOTE Most of the time you can make them work either way, if there a genearl offest. Maybe the wheel this guy has is 5-lug universal. LMAO, your kidding right? ![]() Ok, I went to Tirerack.com and it says the bolt pattern for the neon srt-4 is a 5x100, so they should work fine. I have scion tc wheels, which are 17x7 and they fit great, they do raise the car a bit more, which i nice for my lip kit. This post has been edited by Digndoug: May 3, 2006 - 8:21 AM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) ![]() |
QUOTE(95CelicaST @ May 2, 2006 - 2:07 PM) [snapback]429126[/snapback] There are many people with sportline springs running 18" wheels, so 17" will not be a problem. As long as the bolt pattern is 5X100 and the offset isn't too terrible it should work just fine. Ideal offset would be +35. That would be flush with the body, but people have different offsets. My rims are +42, which makes them sit in a little bit, but don't get anything lower than +35, as that would stick out from the side, like an ugly trash lowrider. I know you're probably just passing on information you've read, but you cannot make suggestions about offset without knowing the wheel's width. I wrote a how-to for this exact reason: Wheel Offset Guide -------------------- ![]() Project ST204.5 99.88946% complete... |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
QUOTE(Digndoug @ May 3, 2006 - 6:18 AM) [snapback]429429[/snapback] QUOTE(95CelicaST @ May 3, 2006 - 2:42 AM) [snapback]429394[/snapback] QUOTE Most of the time you can make them work either way, if there a genearl offest. Maybe the wheel this guy has is 5-lug universal. LMAO, your kidding right? ![]() Ok, I went to Tirerack.com and it says the bolt pattern for the neon srt-4 is a 5x100, so they should work fine. I have scion tc wheels, which are 17x7 and they fit great, they do raise the car a bit more, which i nice for my lip kit. Universal 5 lug is 5X100 and 5X114. So go "LMAO" to that. -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) ![]() |
QUOTE(95CelicaST @ May 3, 2006 - 2:35 PM) [snapback]429552[/snapback] QUOTE(Digndoug @ May 3, 2006 - 6:18 AM) [snapback]429429[/snapback] QUOTE(95CelicaST @ May 3, 2006 - 2:42 AM) [snapback]429394[/snapback] QUOTE Most of the time you can make them work either way, if there a genearl offest. Maybe the wheel this guy has is 5-lug universal. LMAO, your kidding right? ![]() Ok, I went to Tirerack.com and it says the bolt pattern for the neon srt-4 is a 5x100, so they should work fine. I have scion tc wheels, which are 17x7 and they fit great, they do raise the car a bit more, which i nice for my lip kit. Universal 5 lug is 5X100 and 5X114. So go "LMAO" to that. i think he LMAO because you said OEM str4 wheels are universal rims...when they only have 1 bolt pattern @ 5x100 This post has been edited by playr158: May 3, 2006 - 1:57 PM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
In the 1st post he says "They're not stock"
I know OEM wheels are one pattern, but since he says they are not the stock wheels I asked about universal 5-lug. -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) ![]() |
a good point...put if foose...then its most defenitly a 1 pattern rim
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
yes probably true.
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() |
|
![]() Enthusiast ![]() Joined Apr 6, '05 From homosassa,florida Currently Offline Reputation: 0 (0%) ![]() |
yes theyre not stock.they are foose rims and the size of the tires are 205 50 17 what im worried about is they look awfully tight in the well should i have any problems turning at all? hes also selling his stock turbo that wouldnt fit would it,i know stupid question i just wanted to know
-------------------- FOR 21 YEARS I DEALT WITH THE RAIN,
ONLY TO FIND OUT THAT I COULD STOP THE PAIN, SO NOWITZON!!! |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) ![]() |
no the turbo won't fit
|
![]() |
|
![]() Enthusiast ![]() Joined Apr 6, '05 From homosassa,florida Currently Offline Reputation: 0 (0%) ![]() |
damn well there goes that ideathanks tho
-------------------- FOR 21 YEARS I DEALT WITH THE RAIN,
ONLY TO FIND OUT THAT I COULD STOP THE PAIN, SO NOWITZON!!! |
![]() |
|
Enthusiast Joined Apr 21, '06 From Australia Currently Offline Reputation: 0 (0%) ![]() |
I was thinking the same thing, and as you can see a 19" rim will fit with no problems.
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 12, '03 From Portland , Oregon , United States Currently Offline Reputation: -1 (33%) ![]() |
I found out today that they were a mutilug rim, and factory SRT4 is 5x100.
nowitzon - me and you are a testament that 19"s fit, dont you just love how 19"s raise the car so much, I reccomend coil overs I dropped mine on Tech-S's and still is a monster truck. BTW I am going bigger then 19"s now.... DTE -------------------- I am a thief.
do not buy anything from me. |
![]() ![]() |
Lo-Fi Version | Time is now: July 28th, 2025 - 12:40 PM |