CARS BACK 11/15/06, FINISHED PICS PG 11 Options

[celiracer]

Well after waiting a while for my front bumper to get made i finally got everything. My CF zyclone hood will be here monday. But hopefully will get everything fitted perfect this week. Here are a few pics.





I also have a 2-post sitting in my room with shaved raiser blocks, Just havn't got them on yet.

Let me know what you guys think so far.

This post has been edited by celiracer: Nov 17, 2006 - 2:44 AM

[jdg371]

sweet! thats going to look sick

[Rayme]

that bumper looks 10x better with that horizontal "grill" cut out between the two high beam.

SuggestioN?

[celiracer]

Thanks guys. I hope i can get everything fitted. The sides fit in there but have gaps along the doors. And the rear bumper doesn't fit all the way on. I havn't tried with the front yet. Hopefully we'll get everything fitted tomorrow. And have some pics up. If not then somtime this week.

[pandakid]

not to steal the post, but i order my "c-one" kit i just wanna know if you shave the corners like this /----\ will the c-one bumper fit?



BTW ur car gonna look nice, can't wait till mine comes in monday

[celiracer]

Don't know. You talking about the safety bar? I don't know if you will have to or not. A lot of people take it off. Don't know if im keeping mine on or not. But i'll let you know.

[Ralph96gt]

i cut mine to make it fit so ill off at least some time of protection if i crash. Your car is gonna look awesome btw. i love the projectors.

[celiracer]

Thanks ralph. I'm not keeping my cf hood cf tho. my i don't like the look all to much. But i love the hood so i got it and am painting it red.

[pandakid]

yea sorry i did mean the impact bar

[95celgt]

nice combo! how much do you want for the stock front bumper?

[celiracer]

Stock front bumper goes to hitchachi. He's been waiting for my kit to come in so he can take mine lol. Sorry.

[b1gr3d]

damn you! that is almost the exact setup i was going for...ARG


its gonna be sweet

[celiracer]

Thanks b1gr3d it don't matter you can still do it. I know there are other people that have the same set up that i have. But it looks nice. I love how the front flows with the sides and rear. Can't wait till monday to get my cf hood, and have it in the bodyshop hopefully.

[elvasoshexai]

hah i'm getting almost the same setup too...

hm.. i was wondering what did you plan to use for the front turn signals? do GT-4 front turn signals fit on the zyclone bumper?

[celiracer]

Nope only if you get the gt-4 c-one front. I have the 5th gen PCP turns. I bought them from PCP they are gonna be put in there.

Kinda having trouble with the sides coming flush by the door any tips? Also don't know how long its gonna be till i get this thing done.

[elvasoshexai]

Nope only if you get the gt-4 c-one front. I have the 5th gen PCP turns

o damn... was hoping to put gt-4 ones on it... any idea if it's because the opening is too thin, too short or too wide, too long for the GT-4 ones?
5th/6th gen ones need modificatiosn too right? so i guess nothing fits in it without modification?

[celiracer]

Yup nothing really fits in it without modification.

[HaRv3sTeR]

it's gonna look really good...guess im late for the bumper

[celiracer]

Thanks harvester, my bodyman is coming over tonight to look at everything and give me an estimate on doing all the fiberglass work, and shaving. Also fixing all the dings and scratches and re-painting the whole car. So i hope to have good news on my car by tonight.

[celiracer]

Good news . car goes in bodyshop in about week and a half. Will take a lot of progress pictures, can't wait for it to get finished.

[dustinkemp]

man that thing is gonna be sweet when it gets done, goodluck with gettin everythin on and fitted and painted!

[Louis_Cincinelli]

this might be a stupid question, but what kinda fromnt bumper and sideskirts are those? i like em a lot.

this might be a stupid question, but what kinda fromnt bumper and sideskirts are those? i like em a lot.

[celiracer]

Well they are 404 sides and VIS zyclone front bumper. And also the 404 rear lip.

sideskirts are getting molded on.
The 2-post spoiler is also getting molded to the blocks.
rear and front are just getting bolted on and the bodyman is supporting the front bumper to where i can hit a curb and it will just chip paint and not break the bumper. can't wait till the end of August i'm hopeing August 24th and it will be finished, and hopefully going to its first show in September.

Do you guys think that the blocks molded to the wing would look good??

This post has been edited by celiracer: Jul 29, 2006 - 9:46 PM

[Louis_Cincinelli]

hell yeah dude, if i had the money thats EXACTLY what i would do. go for the black blocks. good luck man, and keep us updated

[celicaST]

Do you guys think that the blocks molded to the wing would look good??

ya get it molded, looks hot!




This post has been edited by celicaST: Jul 30, 2006 - 3:39 AM

[celiracer]

Thanks guys. I will keep you guys updated everyday its in the shop. When i get off work i'll be going in there taking pictures of it. The guy does show room quality, (cheap prices) And descently fast at what he does.

[DSRT-FX]

celicaracer! its going to look hot man! my mate has the same setup although he's front bar is modified without the middle section between the highbeams and middle sections under the side vents.

Also got the turn signals modified to fit the 94 turn signals. unfortunately hes got problems with that exact same rear lip. so he's going for something else.

Hope yours go aok. keep us updated -R

[b1gr3d]

i'd get a duck bill.....but thats just me

[Griff]

hey, on those pics of the silver car...what rear is that?

[celiracer]

Thanks dsrt-FX Don't worry everythings going to fit perfectly. The guy that is doing all my work made his own custom bodykit for his 92 prelude. i'll have to take a pic of it. his sideskirts were hand made by him, and the front and rear were also hand made by him. very good customizer, I'm getting everything shaved in the back (antenna, 3rd break light, wyper & sprayer, and all my badges.) i'm going to put the one that says Toyota on the front bumper and getting rid of my window banner.

I will keep everyone updated on this thread.

[celiracer]

Well my CF zyclone hood came in today. I'm going to be painting it along with the car (RED) but decided to put it on and see how it looks.

Will have pics of it tonight.

[celiracer]

let me know what you guys think.

[DSRT-FX]

hooooooooooooooooooooot! the red/cf look has to be one of my favs! why not just keep it like that thats one amazing transformatin youve got going there... keep it up! im in the market for a bonnet aswell -R

[celiracer]

I wanna know who all thinks i should leave the hood cf and not paint it red along with all the kit and car?

Thanks DSRT-FX i'm kinda diggin it. But i don't know yet. Not much of a fan of CF.

[Sammyr]

I wanna know who all thinks i should leave the hood cf and not paint it red along with all the kit and car?

Thanks DSRT-FX i'm kinda diggin it. But i don't know yet. Not much of a fan of CF.

Leave it natural, it looks the business just as it is

[94st_santos]

leave it cf, it looks awesome

where did you get your hood and how much?

[b1gr3d]

get it painte dred from the body lines out and leave the middle CF

[celicaracer220]

u could do what my friend did with his rsx he had the carbon fiber hood shot with a tranlucent blue so u could still see the carbon fiber turned out great ive also seen this dun in red to!

[KB-2]

car looks freking nasty...and by nasty i mean really nice..i really like your rims...where did you get those?? and the cf hood...looks badass, now you should get a carbon fiber spoiler to match, and then some carbon mirrors....**** jsut make the whole car carbon fiber! haha but really where did you get those rims???

[KB-2]

or actully never mind....i found where to get some....but are those silver...or chromium black??

[celicurr]

wow! I love the hood on your car! beauuuuutiful! and the rims too! big thumbs up from this guy!

[celiracer]

Thanks guys there chromnium black. I honestly don't like having a diff color hood then the car. I really think i'm just gonna paint it. The only reason i bought it was because its a lookalike GT-4 hood. And it goes with the bodykit i have. So i don't know what im gonna do yet. I bought the hood from VIS and it was about $500

[celiracer]

Well good news, my car goes into the bodyshop this weekend. Will be taking pics of the progress, and keeping everyone updated as well.

[DSRT-FX]

can't wait to see the final product...

[dustin15brown]

I say paint it... I'm going the same route.... I think.... so hopefully I like how yours turns out
Edit: was it $500 shipped from VIS?

This post has been edited by dustin15brown: Aug 10, 2006 - 10:50 AM

[celiracer]

Ya i paid about $500 for it. my car will hopefully be going into the shop this weekend. Dustin your wanting to get that hood and paint it? If so thats gonna look HAWT.

[CelicaGT04]

So can you give me the guy that you prdered your hood from? lol

[JonMarkos]

Now I know why you are stalling on the nebraska meet...you want to get your car decked out first , jk, it's looking good man, I can't wait to see the finished product

[celiracer]

Hey celicaGT04 contact Boosted. Thats who i got it from. Don't know the exact price i paid for it.

John Markos, Hey man we need to meet up this weekend. What do you have planned on Friday or Saterday. We should hook up.

[x_itchy_b_x]

looks nice!

[celiracer]

Thanks itchy. Well my bodyman just called me today. I'm taking my front bumper to his shop tomorrow so he can make the custom frame support and custom brackets for the 5th gen PCP clear turns. Hopefully by Sunday or Monday my car will be in there getting bodywork and kit installed.

[hitcachi]

What a piece. lol. J/k Matt! Everything sounds like its coming together just as you told me before. That hardly ever happens!

[celiracer]

Just took my front bumper and turns to get the support frame made for the turns and the support for the front bumper.

Bad news is my car has to wait another week before it goes in for a make-over.

[celiracer]

Ok. I got a question for everyone now. My bodyman wants to take that bar that goes in the center of the opening out. And put two of them in there. So that the license plate can be in the middle of the front bumper but behind the mesh. I would just like the plate to be on the left side of the bar. But he thinks it would look better done this way? What do you guys think?

Here is what my bumpers going to look like. I photoshoped it.



This post has been edited by celiracer: Aug 12, 2006 - 7:45 PM

[Tech9ine]

I Think your body man's got it right. Plate in the middle.

[celiracer]

Yup now that i look at it i think thats how its gonna be the two beams on the side, and then the plate right in the middle. But the plates going behind the front bumper and the mesh. i really can not wait till i get this done.

[JFrost9]

I Think your body man's got it right. Plate in the middle.

x2, off center plates look weird. I think your best bet is to keep it centered. symmetry is beauty.

Your car looks hot though, Just make sure your bodyman makes the liscense plate look like its suppose to be there, and not just thrown in there cheaply, or it will hurt your cars looks greatly.

just my 2 cents, Josh.

[celiracer]

It will be bracketed with metal. Behind the bodykit. I'll get a picture of how his is on his prelude and show everyone. You will barely be able to see it in the first place, just because it will be behind the mesh. But i'm going there tomorrow and seeing how far he's gotten.

[celiracer]

scroll up a bit and you will see the modified bumper.
Let me know what you guys think

[bertz]

yo matt......gonna look good man...when i get cs2 ill let ya borrow that but it might take a while gonna be saving up for a car........but let me know when ur car gets outta the shop so we can get the animation stuff done.

-Tyler

[celiracer]

Well i'm still waiting for him to call me to take the whole car in. Was hoping it would be in by now. But he's still making the support for the front bumper. Will let everyone know when it goes in and have progress pics. So everyone keep an eye on this post.

[joehernandez]

Do you guys think that the blocks molded to the wing would look good??

ya get it molded, looks hot!

What kind of body kit is that, or at least the parts, cuz it looks pretty cool to have mine like yours

[ExSane]

What kind of body kit is that, or at least the parts, cuz it looks pretty cool to have mine like yours

That is the EURO front lip for the GT-FOUR, the EURO side skirts for the ST202, and I'm not sure about the back.

[CelicaGT04]

PICS PICS PICS!!! we want pics!

[celiracer]

Ok well the car went in today. I will be taking pictures of the progress. The hood i decided to paint it red also. I like my car all one color. Unless my car was white or silver, then i'd keep it CF. But everyone will be updated with progress every other day.

[celiracer]

Going to take pictures of the bodywork tomorrow. He called me today and has the car on jack stands with some progress. So will take some pictures tomorrow.

[celiracer]

Well went to the shop today to look at my car.
I only got a couple pics of her, but the sideskirts
are molded and the front custom crash bar is made up.
Plus he has steel bars that are going to be flush behind the
bumper to support the whole bumper.

You can see the bar where the crash bar used to be.



this is a pic of the sideskirt molded the the car. He has to wait
till tomorrow to finish molding it.

[block]

nice! can't wait for the final results! how much are you paying for all this? jw

[celiracer]

Well i'm getting a lot of dents fixed and the whole car done with the fiber glass work. I'm paying 2k for everything.

[celiracer]

Probably going to the shop tomorrow to see how everythings going. Hopefully i'll get some more pics with the bumper on and the sideskirts fully molded to the car.

[DeW_H0e_GT]

wow u going with the molded side skirts?....hmm....what uif u need to jack up yoru car?..LoLs....JP...nice ride..keep us informed plz!!!

[celiracer]

If i jack my car up its from the front or the back. And most of the time i just put it on my lift. hopefully have more pics tomorrow.

[DeW_H0e_GT]

If i jack my car up its from the front or the back. And most of the time i just put it on my lift. hopefully have more pics tomorrow.

BTW, where would u jack it up from the front n back?......cant wait u hook it up....

[celiracer]

Well in the front there is your big frame in the middle, that also has a little round peice. I usually jack there. And with the bodyman doing all this custom stuff. He is extending that frame bar to go all the way to the front of my bumper. And in the back i use the middle of the axle.

[DeW_H0e_GT]

Well in the front there is your big frame in the middle, that also has a little round peice. I usually jack there. And with the bodyman doing all this custom stuff. He is extending that frame bar to go all the way to the front of my bumper. And in the back i use the middle of the axle.

thanks matt..thas jus what i thought........

[celiracer]

No prob man. When is your car gonna be finished? i'll hopefully get new pics of progress tomorrow. He was to busy working for me to get pics today. And also Dewhoe we need to get a meet set up for next summer in between FL and NE

[DeW_H0e_GT]

ahhaah good luck on that meet....

cars runnin in to some trouble......but itll be done soon...i hope *cross fingers*

[celiracer]

Well its been 2 weeks. I havn't had time to go up and get some progress pics hopefully today or tomorrow. He should be getting pretty close to being finished. I miss my car. It sucks being car less for 2 weeks so far.

[hitcachi]

Well its been 2 weeks. I havn't had time to go up and get some progress pics hopefully today or tomorrow. He should be getting pretty close to being finished. I miss my car. It sucks being car less for 2 weeks so far.

its gonna suck when you get it back too, casue mine will still be faster then yours hahahaha!!

[celiracer]

We'll see who gets a 3s faster JIM. But anyways Got back from the shop today. Here is some new pics. ENJOY!

[MaskedMan]

so those two bars in the middle are connected to the front bumper and the frame bar?

[celiracer]

No them two bars are just connected to the bumper. The bumper origanally had one bar in the middle. Like the pic on the 1st pg. Then he cut that one out and made two on each side. Behind the bottom part of the bumper is a steel bar that goes all the way around the bumper. And my crash bar is that big bar on my car. My license plate hooks to that crash bar and will be behind my bumper and mesh.

Hopefully this picture helps.



This post has been edited by celiracer: Sep 29, 2006 - 5:20 PM

[hitcachi]

you should have been in lincoln, up at the races tonight. Lots of people and a huge cruise. Last big one before it gets cold. You missed it.

[celiracer]

eh o-well. i'll be up there more next year anyways. But hopefully i'll have my car by next weekend.

[celiracer]

Well i'm hoping that i get my car back this friday. When i get it back i'll have pics posted ASAP!

[hitcachi]

you better get to lincoln asap friday night!! Check weather. Im not sure if its supposed to be that nice or not. It better be tho. Cause we need to throw down!

[celiracer]

Need to throw down? What the hell is that supposed to mean. And nope i'll prolly be going to Lincoln Saterday night if i get it back this weekend.

[MaskedMan]

ooooo ok ok, i get it now . Thanks for the explaination . I hope you get it back this weekend and take more pics!

[celiracer]

No prob man. And def hope i get her back this weekend. It's been 3 weeks today and it really sucks not having a car for that long. I miss her. But ya i'll get tons of pics

[celiracer]

Just got back from the bodyshop. Got a couple new pictures. Found out that This Friday my car will finally be finished.

This first picture shows how the front support bar is made.
The little bar in the middle is where i will be able to jack my car up from,
and also sits lower then the bumper so if i hit a dip it will hit that bar instead the bumper


This picture shows the sideskirt finished. They are both molded to the car.


ENJOY!

[celiracer]

I'll be going up to the shop Wednesday and hopefully have some pics of everything on and the car primered.

[purplegt4]

very very nice!

[celiracer]

Thanks man. I just can't wait to get my car back.

[celiracer]

Well was supposed to get my car back tomorrow. But went out there today and they are not quite done yet. I have a couple pics of the passenger side, skirt, Its completely molded to the car and that whole side is primed and ready for paint. All he has to finish is the rear lip, and shave the holes and finish with the wing. My camera is messed up so hopefully tomorrow i'll get them two pics up.

[ExSane]

Well was supposed to get my car back tomorrow. But went out there today and they are not quite done yet. I have a couple pics of the passenger side, skirt, Its completely molded to the car and that whole side is primed and ready for paint. All he has to finish is the rear lip, and shave the holes and finish with the wing. My camera is messed up so hopefully tomorrow i'll get them two pics up.

Can't wait!

[celiracer]

Well i can't figure out whats wrong with my camera. I can't get them to uploads. trying to get pics up soon.

[celiracer]

Here are a couple pics of what my molded skirts look like.




Enjoy, and let me know what you guys think?

[x_itchy_b_x]

i think your bodyman is slow.. jk jk... LOOKS GOOD.

[hitcachi]

ENOUGH WITH THE MOLDED SIDESKIRT PICS!!!!!11!! SHOW SOMETHING ELSE!! and ya, your body man is slow.

This post has been edited by hitcachi: Oct 13, 2006 - 12:24 PM

[elvasoshexai]

i kinda wanna mold my sideskirts now... hah