Shocks/Struts:, Which one to buy?? Options

[m0dd3d1]

I'm in the market for some new shocks. I'm looking @ KYB Gas shocks. I only know 2 kinds of shocks, KYB's & Tokico's. Are there any other good brands out there?

[hitcachi]

bilsteins. And koni's are awesome for performance. Im researching right now, but im not sure if they make tokico blues for 6th gens.

[LewFX]

monroes but those are crap imo

[m0dd3d1]

Sweet thx! Do any of them range higher, price-wise?


-Triscuit

[hitcachi]

lol, when it comes to shocks..... you get what you pay for!

[LewFX]

i can do a price list:
Kyb: front shocks $50-65 each, rear struts $60-65, front struts $60-65
Monroe: front struts $50-60, rear struts $50-60
Koni: all four $650
Bilstein: front strut $73, rear struts and front shocks, $320
Tein Coilovers: $1000+

[jdg371]

if your creative.. shortened strut mounts with MR2 rear struts.. 100each for Kyb AGX. 8pt adjustment

[LewFX]

didnt coomer try something like this and something happened?

[hitcachi]

ya i remember a thread while back and something happened to where it didnt actually work.

[Kwanza26]

if your creative.. shortened strut mounts with MR2 rear struts.. 100each for Kyb AGX. 8pt adjustment

Didn't work. It's a common mod for the AE86 guys and we talked a bit about it possibly working on the 6gc... but Coomer tried and it turns out the MR2 inserts are too long... =[

[jdg371]

if your creative.. shortened strut mounts with MR2 rear struts.. 100each for Kyb AGX. 8pt adjustment

Didn't work. It's a common mod for the AE86 guys and we talked a bit about it possibly working on the 6gc... but Coomer tried and it turns out the MR2 inserts are too long... =[

Hmm Im still going to attempt something similar. Did Coom use MR2 rear strus? also didnt Punch do it and was succesful?

[hitcachi]

http://www.6gc.net/forums/index.php?showto...hortened+struts

[jdg371]

http://www.6gc.net/forums/index.php?showto...hortened+struts

well theres goes my plan.. and my welder is in Texas

[airfron]

doesn't Tanabe make coilovers for the 6g too... but i think they are non-adjustable.... not sure... anyone???

This post has been edited by airfron: Aug 30, 2006 - 5:34 PM

[m0dd3d1]

So I've got a quote: for roughly $600, I can get a set of all 4 KYB gas shocks/struts + install. The shop that's doing it is very reputable...if anyone's from MD they'll know...AEX Cinema. Good price? Thanks ahead of time.

-Tricscuit

[hitcachi]

So I've got a quote: for roughly $600, I can get a set of all 4 KYB gas shocks/struts + install. The shop that's doing it is very reputable...if anyone's from MD they'll know...AEX Cinema. Good price? Thanks ahead of time.

-Tricscuit

^ How much are they charging for install? Kyb's arent that expensive so the labor charge has to be through the roof. Dude..... if you take that money, and add 50 dollars then you have koni's. (the best) then you could install them yourself follow john's kick butt how to article. its easy. trust me.

[jdg371]

gr2s are like 60bux a piece.. grab a case of beer.. a couple friends and get it done in a day

[LewFX]

kybs are as low as 50 now, 200 and some shipping, 300+ for labor is horrid

[m0dd3d1]

$281.60 for the kby's, & $320.00 for the install, which is nuts. Now (i don't really know much about suspension mind you) the way it was explained to me, was the shocks/struts are kyb which will replace the whole rear susp, and the shocks will replace the front ones and i'll keep my eibach springs on the front? What's the difference between shocks, struts, sways, springs (are self explanitory). Does anyone have like, a picture of an entire setup so I can tell what's what? I'm not really trying to jack my own thread, but it is along the same lines because i'm looking at susp for the celli! Thanks guys.

-Triscuit

[zipstrips]

$281.60 for the kby's, & $320.00 for the install, which is nuts. Now (i don't really know much about suspension mind you) the way it was explained to me, was the shocks/struts are kyb which will replace the whole rear susp, and the shocks will replace the front ones and i'll keep my eibach springs on the front? What's the difference between shocks, struts, sways, springs (are self explanitory). Does anyone have like, a picture of an entire setup so I can tell what's what? I'm not really trying to jack my own thread, but it is along the same lines because i'm looking at susp for the celli! Thanks guys.

-Triscuit

320 labor is crazy. your local dealer should be cheaper than that. find another local member willing to help install and throw them some cash for help or doing it. if your willing to drive to PA i would even change them for ya for less than half of that shops price. im sure theres a member relatively close to you willing to help for a small fee