FS: parting black 94' ST coupe & more (UPDATE PG.9), 3s fuel rail, ST coupe parts, Interior parts Options

[celicast3sgte]

I have for parts a 94' black ST coupe with 79k miles. anything you want let me know. i have some pics ill post below. anything else post and ill get pics or we can make a deal.

EDIT: Also have a full manual swap for the ST, Shift tower, ST cables, ST master cyl (high miles), ST slave cyl (high miles), ST hard and soft lines, Clutch pedal assembly with both working sensors and smaller brake pedal. (160shipped for this)

1 good ct26
1 core ct26 with shaft play
1 2nd gen fuel rail with injectors


2nd gen rail and resistor pack?

both fans work great

low miles pads & rotors (doubt anyone will actually want these)

94' ST airbox w/ air temp sensor

2nd gen 3sgte Headgasket OEM toyota, NEW



Anything else you are looking for just ask i have a lot left over between my white and black ST coupes.

This post has been edited by celicast3sgte: Dec 5, 2007 - 10:16 AM

[95celgt]

do you have driverside fender in black?

[celicast3sgte]

driverside fender was used for my recent accident on my white one. so no.

[95celgt]

how about the radiator supports and fuse box?

[CelicaST202]

do you have the auto radiator?

[celicast3sgte]

im using the auto radiator, the black one's split.

rad suports yes, fusebox no

[celicast3sgte]

BUMP

[longsbeans]

dibs on a center cushion arm rest if its in good condition

[celicast3sgte]

dibs on a center cushion arm rest if its in good condition

already sold. sorry man

[6th_celi_vert]

what about the 3s oil pan???

[celicast3sgte]

no other 3sgte parts are being sold here other than the 3rd gen 3s ECU. these are parts off my black parts car not my white one.

This post has been edited by celicast3sgte: Nov 22, 2006 - 10:23 PM

[celicast3sgte]

bump

[celicast3sgte]

Turkey day BUMP!

[terqui]

If the coupe rear bumper is the same as the hatch then i want your bumper

[celicast3sgte]

im not sure if it is or not. does anyone know if they fit?

[celicast3sgte]

I have TONS more. anything u want lemme know ill get pics. CLICK TO MAKE THEM BIGGER

[celicast3sgte]

bump for the new pics

[x_itchy_b_x]

ill take that

[celicast3sgte]

sold. trade for that cooler?

This post has been edited by celicast3sgte: Nov 25, 2006 - 3:21 PM

[celicast3sgte]

Update:

3rd gen 3sgte ecu - SOLD
1 of 2 ST throttle cables - SOLD (1of2)
Shifter plastics - SOLD
Plastics around radio - SOLD
Pillars (both sides) - Pending




BUMP TO THE TOP!

[djspike]

passenger side high beam?

[celicurr]

driver side low beam ?

[celicast3sgte]

passenger high yes. 40shipped?

driver low no

[celicast3sgte]

bump.. im open to offers on any of this stuff! let me know! i need it gone since im moving soon. i just sold a 3rd gen 3s ecu for 50shipped.. thats CHEAP

[DeW_H0e_GT]

pm sent

[celicast3sgte]

replied

[celicast3sgte]

Update:

3rd gen 3sgte ecu - SOLD
1 of 2 ST throttle cables - SOLD (1of2)
Shifter plastics - SOLD
Plastics around radio - SOLD
Pillars (both sides) - SOLD
Passenger high beam - Pending upon pickup


*Added for sale* MUST BUY! Apexi Turbo timer. works perfect was installed but im replacing it with a blitz DTT


BUUUUUMP

This post has been edited by celicast3sgte: Nov 29, 2006 - 12:16 AM

[x_itchy_b_x]

nice sc300!

[prpnum1]

hey. do you still have the cd brackets and also the little din that goes under the cdplayer. and maybe even the glove compartment. need asap and can pay right away. pm me

[celicast3sgte]

cd bracket and under cd player are both sold. i do have the glovebox and its in mint condition. interested?

[95celgt]

ok I have cash now, can you take a pic of the rad. supports? engine bay if possible.

[celicast3sgte]

you want the upper rad supports right? what parts would you like pics of?

[95celgt]

yes, both upper one price.
Lower another
And the cross member another.

just take a pic of the front clip for me:)

[celicast3sgte]

upper 20$ shipped

lower is tack welded to the frame i think. (ill check)

and the crossmember ill need a zip code

[95celgt]

78045 is my zip, im willing to pay fou you to cut off the lower if it is.

[celicast3sgte]

hmmm ok so 50$ shipped for the lowers, ill make sure i find the rubber inserts as well.

crossmember ill get back to you. (crossmember is WITHOUT front & rear motor mounts)

[95celgt]

alright, just get me some pics tommorow and let me know about that crossmember:)

Thank you

[thatcelicaguy]

how much for both highbeams?

[celicast3sgte]

drive side high was used on my white celi and the passenger side is pending local pickup. you get first dibs after him though.

[masterluie214]

driver side viser got any pics of that?

[kamax]

passenger side front wheel well plastic? and front undercar plastic cover. price on them? and also the foot rest by the clutch, if in good condition with good clip/screws =/

This post has been edited by kamax: Dec 1, 2006 - 5:24 AM

[celicast3sgte]

ill get back to you on the wheel well plastics. 20 shipped

undercar cover is gone.

footrest is good. 20shipped


for both 35shipped

[celicast3sgte]

passenger side fender well has been cut up a little bit. So i dont think you will want it. I do have that foot rest though. Let me know if your interested.

[celicast3sgte]

visor ill get you pics later today.

here are the lower rad supports


uppers I need to find, they seem to have gone missing.

and heres the crossmember. The one on the RIGHT is the one for sale.

[celicast3sgte]

Bump!!!

lost contact with some of the people asking for these pics. anyone interested? still waiting on the guy for the passenger highbeam.

UPDATE:
3rd gen 3sgte ecu - SOLD
1 of 2 ST throttle cables - SOLD (1of2)
Shifter plastics - SOLD
Plastics around radio - SOLD
Pillars (both sides) - SOLD
Door seam covers - SOLD
Passenger high beam - Pending upon pickup


*Added for sale* MUST BUY! Apexi Turbo timer. works perfect was installed but im replacing it with a blitz DTT

[celicast3sgte]

sorry i havent gotten back to you on the visor. ill get pics tomorrow!

BUMP!

remember i still have a 2nd gen fuel rail with injectors and resistor pack! as well as 2 ct26 turbos 1 good 1 with shaft play. and the apexi turbo timer.

[celicast3sgte]

bump

[celicast3sgte]

bump.... need some money so i can buy my car some xmas presents

[Rangemaster]

PM SENT.

[celica47]

Do you have the Plastic materials that lays in the fender well?

[Rangemaster]

another PM sent (follow-up questions)

[95celgt]

waiting on the upper supports,

so how much alltogether including the crossmember?

[celicast3sgte]

the fenderwell plastics are toast.

upper rad supports are missing, i will have to find them.

95celgt- PM me im gonna need some info from ya and talk about some prices.

[Rangemaster]

Another PM sent...

[LewFX]

how bout under the car plastcs? and how bout the light in the trunk?

[tcox22]

is this still available?

[95CelicaST]

Do you have the front seats from the Black Celica? What condition and fabric pattern are they?

[celicast3sgte]

BACK FROM THE DEEEAAAADDDD!!!

I sold a few things then ran out of time when I moved places. SO i'm bringing this thing back from the dead. Anything you guys are looking for if i have it ill post pics.

[95CelicaST]

Power window motors?
Seats?

[celicast3sgte]

window motors are sold seats i can clean up and get pics to ya by this weekend, Grey in the center black on the outside cloth seats.

[95CelicaST]

Any rips, excess wear, stains, etc?

[ZoomZoom]

how much for the door panels on both side shipped to N3T 5L8, Burlington, canada
how much for the glove box shipped.

also what is the small hole on the door panels beside the speaker cover?
Please let me know.

do you also have the rear plastic panels?

[96bluevert]

PM sent about quarter panel

[Theyellowdart084]

i need one rim, the OEM 15 inch.....no tire and it has to be in decent shape....do you have any?


Thanks!!

[trd94]

i need the driver side wheel hub assemable ,the whole knuckle , what the bearing is in . pm me a price if you have one shipping is 44883 tiffin ohio.

[Valo666]

pics and price on front lower control arms, rear controll arms, and strut rods.

[WannabeGT4]

FYI, The plug on the resistor pack doesn't look like the one on the 2nd gen 3S. I assume that's a 3rd gen resistor pack.

[black13]

what do you mean by full manual swap?

[celicast3sgte]

WOW. lots of replying was just done.

black13, its all the interior pieces youll need (smaller brake pedal, clutch pedal and assembly, shifter and shifter tower, clutch master, clutch hardline for firewall, clutch rubber line to tranny) NOOO TRANNY

wannabe, yeah i wouldnt be surprised. thanks for the heads up anyone interested in looking into this for me?

valo6666, those pieces im going to wait till later to pull that stuff off, ill PM you.

trd94, same thing, i want to wait like maybe 2 weeks or so to pull the suspension apart.

yellowdart, no stock rims.

96bluevert, PM'd back.

zoomzoom, PM me about those parts.

95celicast, the seats arent all that new (the lesser used ones are in my white one now.. hehehe) but they arent stained or tore up.

[Akimbo]

fenders?

[celicast3sgte]

akimbo, only passenger side is left and is in fair/good condition. i used the drivers side on my white celica.

This post has been edited by celicast3sgte: May 31, 2007 - 1:02 AM

[Rockford]

bro.. how much for this???



the pair shipped to 33166 in usa?

[trd94]

no problem i can wait if you are willing to sell.

[ILuvMyCelica95]

WOW. lots of replying was just done.

black13, its all the interior pieces youll need (smaller brake pedal, clutch pedal and assembly, shifter and shifter tower, clutch master, clutch hardline for firewall, clutch rubber line to tranny) NOOO TRANNY

This would have been awesome to know if i didnt go buy all these via E-bay and Toyotaworld.

[Akimbo]

akimbo, only passenger side is left and is in fair/good condition. i used the drivers side on my white celica.

could you be a bit more descriptive? hows the paint, dents/scratches, etc

[tonytutino]

hey dude... relay cover in the engine bay driver side shipped to 42101?

[celicast3sgte]

tony, relay cover.. ill look and get back to you..

akimbo, good on the paint, no dents that i can see, paint isnt scratched deeply just the usual swirl marks from being washed when it was too dirty (NOT ME). it does have a couple small holes where the invader skirt was screwed into it.

tina, LOL sorry i posted the swap stuff a long while ago but i just havent been up to date with this thread..

rockford, i think you would be #2 or 3 in line for the panels i will contact you if the others fall through.

pheww... i think thats it. all this posting is hard to keep up on right when i get home from work. BUT i want this stuff sold. hehe

[hitcachi]

If those door panels don't go soon or if offers fall through, i need them. I WILL buy them from you if the others dont. 68360 is NE area code. Thanks and let me know.

[celicast3sgte]

http://s167.photobucket.com/albums/u140/ni...=0531071949.jpg

this is also for sale.

[Rockford]

rockford, i think you would be #2 or 3 in line for the panels i will contact you if the others fall through.

send me a PM anyway with the price pls

[Valo666]

how much for the door/window gaskets?? any rips in them at all?? *the gaskets im looking for are the ones that fallow the window down the a-pillar*

This post has been edited by Valo666: Jun 3, 2007 - 2:46 PM

[celicast3sgte]

valo666, ill take a look i believe they are in good condition. offer? $$

[Valo666]

$20 for the pair shipped??

[airfron]

how much for the cf gauge cluster trim?

[xquickwitx]

I am in need of an A/C condensor. Would you happen to have one of those to spare?

[95CelicaST]

Hey, I'll meet you somewhere and buy the gauge cluster, trim, and all. PM me with price.

[chrisalphonsus]

I have for parts a 94' black ST coupe with 79k miles. anything you want let me know. i have some pics ill post below. anything else post and ill get pics or we can make a deal.

EDIT: Also have a full manual swap for the ST, Shift tower, ST cables, ST master cyl (high miles), ST slave cyl (high miles), ST hard and soft lines, Clutch pedal assembly with both working sensors and smaller brake pedal. (160shipped for this)

1 good ct26
1 core ct26 with shaft play
1 2nd gen fuel rail with injectors


2nd gen rail and resistor pack?

both fans work great

low miles pads & rotors (doubt anyone will actually want these)






Hey i need a few things
- the trunk lid in white or any other color and the part where the lic plate goes and maybe the antannae as well . would you consider shipping to canada ?
94' ST airbox w/ air temp sensor

2nd gen 3sgte Headgasket OEM toyota, NEW



Anything else you are looking for just ask i have a lot left over between my white and black ST coupes.

[celicast3sgte]

xquickwitx, ill look to see where the a/c condensor went. (your not talking about the a/c radiator you want the aluminum canister correct?)

chrisalphonsus, you didnt list what you wanted out of that quote???

[celicast3sgte]

valo666, i would want 45 shipped for those. lemme know

[xquickwitx]

xquickwitx, ill look to see where the a/c condensor went. (your not talking about the a/c radiator you want the aluminum canister correct?)

Honestly, I'm not entirely sure. I'll get back with you when I get under there again but I believe its the radiator.

[Sinyk]

Any chance you have the passenger side trim like in the picture?

[xquickwitx]

ok I need the A/C radiator/condensor whatever you want to call it. Its just infront of the engine radiator. I tried to recharge it and I found the little pin hole where someone's tire or something threw a rock and bent up the fins a bit and nailed one of the ribs across. Does anyone think if I JB weld it, that it will hold?

<update> nope, pressure found a new way through the JB

This post has been edited by xquickwitx: Jul 16, 2007 - 3:33 PM

[Aaagogo]

ur pm mailbox is full

would you sell the 4 injectors without the rail?

[2fast4u94]

Hey, I was wondering if you had all the plastic covers the go underneath the car in the front. The protective covers covering the engine and front bumper?

Thanks,
Melvin

[stephen_lee]

hey man, do you have the windshield washer pump??
how much would you like shipped to 77901?

This post has been edited by stephen_lee: Jul 19, 2007 - 2:34 PM

[96celica25thann]

tail lights for sale? pix?

[doGGy]

Looking for the airtubes that go driver side airvent! One tube is bolted on the dash, second one is going from the heater core to the one that is bolted...

Please let me know..

[bdog_v]

-Parts I am looking for, black seats front and rear, black carpet, center armrest, top headliner.

I have the money now if parts are available,


Thanks,

Brandon

[yyet]

Will a ST oil pan fit on my 94 GT?

[garygarrett1]

I have for parts a 94' black ST coupe with 79k miles. anything you want let me know. i have some pics ill post below. anything else post and ill get pics or we can make a deal.

EDIT: Also have a full manual swap for the ST, Shift tower, ST cables, ST master cyl (high miles), ST slave cyl (high miles), ST hard and soft lines, Clutch pedal assembly with both working sensors and smaller brake pedal. (160shipped for this)

1 good ct26
1 core ct26 with shaft play
1 2nd gen fuel rail with injectors


2nd gen rail and resistor pack?

both fans work great

low miles pads & rotors (doubt anyone will actually want these)

94' ST airbox w/ air temp sensor

2nd gen 3sgte Headgasket OEM toyota, NEW



Anything else you are looking for just ask i have a lot left over between my white and black ST coupes.

ECU? Do you still have it available?


OH yes I need a passenger window as well.