Airsoft, Post your gear. (weapons, mags, camo, etc) Options

[devilsden97]

Like it says, Full airsoft discussion. I understand the rules of the forum, and this is a LEGAL activity for adults over the age of 18, and sometimes 21 depending on the state. I also understand that guns look VERY real, but since prior threads have been made discussing hand guns, I will say its safe to assume that this thread could be made, and maintained.


Ill start it off with my gun.

ICS C-15
Standard:
-Turbo 3000 high-torque motor (standard for all 2007 ICS m4 models/varients)
- Full metal reciever
- Full stock (so i can cram my HUGE battery into it)
- 2 part gearbox
- 16 gauge wiring, with built in fuse.

Mods:
-ICS 6" QD Silencer
-A&K 5000round Box mag. (manual wind....I prefer it over battery powered and auto wind.)
-8.4v, 4200mah NiMH Battery
-Standard Vertical Forgrip
-Ready Mag System (not shown)
- 450round Hi-Cap magazine (x2) (also not shown)


Photos:


w/o silencer


with silencer










Silencer and box mag


back of box mag


top of box mag

Only downside to this gun so far is that with it fullly loaded, and a full metal body, it weighs an ENORMOUS amount...were talking about 15lbs. Also the box mag is plastic instead of full metal, the full metal was going for $150, and i wasnt about to spend that, and make the gun push 20lbs.

This post has been edited by devilsden97: May 13, 2007 - 12:43 PM

[tim86]

thats pretty sweet... how much did the gun cost?

[devilsden97]

The gun itself cost me $400, but after the box mag, vertical forgrip, ready mag system (not pictured), im up to about $500 on that gun alone.

Im still looking for a nice red dot, with an offset clamp mount... that would basicly finish it up for exterior mods.

When i get the time, ill take some shots of my brother, and my full arsenal of weapons. (currently alots to about 8ish guns)

[Shocker]

Awe man..Now im gonna have to go import my pictures over.haha. Ill takes some more pics later and post them up.

[devilsden97]

Ok, so the arsenal


^all the highend guns we own (we being my brother and I, we have other lowerend springers...but we dont use them)


TM ak...(brothers)


TM ak and 600 round hi-cap mag.


Echo1 (midgrade) g36c, with stock folded.

stock out


colt gas pistol

slide locked back

More of mine:

artsy shots:




^my gun with the box and 450rd. hi-cap mag. (x2)

^my UBER custom battery.

This post has been edited by devilsden97: May 13, 2007 - 5:09 PM

[kcizzle]

I haven't tried joining airsoft but I bought myself a piece, Tokyo Marui Desert Eagle, Hard Kick

[jmastaniza]

who makes that g36? I'm thinking of getting a TM

[devilsden97]

who makes that g36? I'm thinking of getting a TM

the one my brother and I own, is made by a company called Echo1. there considered midgrade guns because there not TOP quality like TM or ICS. but they are VERY good none the less. The Echo1 g36c was about $150. But i could just imagine the tm one.

[Akimbo]

that compact g36 is nice.

but i'd rather get a real gun with the money, i don't know why you guys dont?

[Shocker]

who makes that g36? I'm thinking of getting a TM

the one my brother and I own, is made by a company called Echo1. there considered midgrade guns because there not TOP quality like TM or ICS. but they are VERY good none the less. The Echo1 g36c was about $150. But i could just imagine the tm one.

Dude Echo 1s are the ****..id buy one over a TM anyday,dont get me wrong i love my TM m14 but Echo ones are killing the tms out of the box. And a Echo 1 shoots about 30fps harder than a tm out of the box.
ToykO MARUI MAKE A VERY Durable long lasting internals as long as you dont upgrade.
But for best bang for you buck go echo 1

[devilsden97]

that compact g36 is nice.

but i'd rather get a real gun with the money, i don't know why you guys dont?

real guns kill people.

airsoft guns u really need to try inorder to kill someone.


honestly, i wouldnt feel safe with a real gun in my house.

its just a hobby like paintball

[forkee]

i just have some cheapos



gonna go for the g.i. joe look for halloween


This post has been edited by forkee: Sep 20, 2007 - 12:14 AM

[Shocker]

that compact g36 is nice.

but i'd rather get a real gun with the money, i don't know why you guys dont?

real guns kill people.

airsoft guns u really need to try inorder to kill someone.


honestly, i wouldnt feel safe with a real gun in my house.

its just a hobby like paintball

True that is the closest thing to being able to shoot your freind and still have a freind afterwards..

[j0e_p3t]

i got a cheapo handgun too. 10 bucks from the swap meet. and its got a flashlight and a non-accurate laser pointer.

[urbandork]

work in progress: western arms base wilson combat supergrade SE2004 w/ king arms a.a.c. evolution .45cal silencer, longer inner barrel, hi flow valve, and what ever may come its way.




custom springfield armory ultra compact v10 slide mated to a custom bobtailed full length springfield armory frame w/ custom pachmyar grips and a once piece barrel.




P90TR 385 fps with .25 gram and 425 or something with .20 gram.... to hot i need to put in a diff spring. Ive done a custom OD paint job, sound dampen the shell and gearbox, high torque gears, J type 9.6v 1700mha bat., KM Lightweight 200x40mm silencer shrouding an m4 length tight bore barrel.



thing i made when i was bord with some extra parts




Old pic of friends mp5 ras and sr16, my tm glock 26 (it was my first airsoft item i ever had and i still have it) kjw usp w/metal slide and socom silencer, scouting scope, RDS, tac vest, drop leg holster, and my hand made ghillie.


Me posing with my usual urban get up.. some times i have my upper torso ghillie on



This post has been edited by urbandork: Sep 18, 2007 - 12:26 PM

[Harold_Fastwaker]

kjw usp w/metal slide and socom silencer

Nice setups. I attempted to get into airsoft but paintball ate up my money. Trying to stay top end gear is such a bad idea with it

Anyway, Nice USP, I have one too. I think mine will hurt a bit more




A Wilson Combat 1911 is my next gun to buy. They sure are expensive though

This post has been edited by Harold_Fastwaker: Sep 18, 2007 - 5:50 PM

[urbandork]

yeah i wanted to buy the supergrade wilson combat like the airsoft one im working on now but a use one will cost me 3 to 4 grand.... so i think ima just get a different 1911.... i figure if i shoot n e one it wont be at 100 yards so i dont have to worry about having .25" groupings lol

as for my usp.... i sold it... im not a double action fan.... nor am i double stacker fan... my asian hands are sto small and i dont like the trig pull weight and response of a double action.... thus my new liking to 1911's..... btw ive shot a lot of kimbers and springfeilds, man kimbers are nice.... are wilsons that nice as well?

plus being in CA i cant have a suppressor on any of the real steels i have. thus i go with airsoft lol .

This post has been edited by urbandork: Sep 18, 2007 - 6:47 PM

[Harold_Fastwaker]

Wilsons are very nice. As are Nighthawk and Ed Brown 1911s. As for the USP, I carry in SA. No Double Action issues here.

This post has been edited by Harold_Fastwaker: Sep 18, 2007 - 11:18 PM

[urbandork]

well after 5 years of not jumping on the armalite ban wagon i finally did....

ics base
madbull foregrip
std triangle sight
vortex flash hider

believe it or not but after a good amount of work on the outer barrel i acutally got a 9.6v 1400mah ni-mh bat in that foregrip and was able to retain the fuse too!!!




This post has been edited by urbandork: Apr 30, 2008 - 2:27 PM

[Stambo]

I've been through a ton of different types of guns, from snipers to bullpups and to m4's. I've done custom paint on most of my guns too.




Dead stock tm sig 552 except just metal bushings and reshimed in the gearbox. IMO sigs suck cause the rof is terrible.




And one of my personal favorites. My TM famas sv, custom paint job by myself, systema 6.03 m16 length tightbore, and my own custom front grip from a utg mp5 motor grip . Famas was my all time favorite cause the rate of fire was insane.




KJW m700, another custom paint job




TM m4a1 m16 length 6.03 Prometheus tb. Metal bushings, shim job, m100 spring. CA metal body. Another paint job. To bad i don't know as much as cars as i do airsoft guns.....

[_mikeE]

Man you guys make me feel noob with your big flashy guns and silencers and stuff. Here's my cheap little 6 cal. that i got from wal-mart. It also has auto-fire which is the reason why I bought it, so I wouldn't have to cock it back everytime I fire. And the laser was a piece my friend gave me from his m15 or 14 or w/e and suprisingly its pertty accurate, only downfall is that I have to hold onto that button with my thumb to keep it on.


This post has been edited by _mikeE: Apr 30, 2008 - 10:07 PM

[SeverX13]

ive been wanting to get into this for a while but there is no one in my area. i was thinking about gettin a jg M4.

maybe we can show some of this off at DWG? haha


anyone know of any courses in that area? we could get some games goin.


but if anyone can help me out finding a 1st gun, id really appreciate it


thanks

brent

[jason]

id play with you!!! eastern pa airsoft lol

some friends and i used to play in this wooded field area behind his house. was several acres of perfect terrain that they owned. should give em a call.

[Stambo]

If your planning to actually play a lot and have a committed group of people to play with, go with classic army or tokyo marui. Those are just a few "starter" brands, or you can go the cheap way with the echo 1's, jg's, utg's. Sometimes if your lucky you get a perfectly good working chinese clone, sometimes your gun doesnt work at all when it gets to your door. Thats why i went with the tm's or ca's cause of the reliability. But, thats just me. It's mainly up to you on how much you want to spend.

[forkee]

really nice paintjobs!!

[Stambo]

Why thank you, once i get enough money, I am planning to do my own paint job on my car someday.

[manolis]

In past i had one M-16 and one pistol smith&wesson but now i am ipsc shooter. I like it very much because you use real gun!!!! I shoot with Glock 17 and with Hs 2000. It is safe but expensive sport.

[urbandork]

[massbrandon]

^^ Dont you know to keep your finger off the trigger for pics? lol Just kidding

[urbandork]

^^ Dont you know to keep your finger off the trigger for pics? lol Just kidding

actually u r right on the second one, as i was just resting. but the first one i was "shooting" at someone

[SeverX13]

alright, i just ordered a JG M4 s-system 2008 tightbore version, 3 point sling, and some high grade bbs. Now all i need is a co2 pistol and some gear haha. ill get pics up once i receive the gun

[Stambo]

anyone want a classic army sl8? ha

Sever the JG's arnt to bad from what i hear.

[SeverX13]

anyone want a classic army sl8? ha

Sever the JG's arnt to bad from what i hear.

yea ive read several reviews an such. it seems pretty good for a 1st gun. you wouldnt happend to ahve any gas pistols for sale would u?

[devilsden97]

anyone want a classic army sl8?

How much? and can i get a photo. (and im being serious)

[Stambo]

just sold my gbb glock, sorry. Devil pm sent.