![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jan 19, '03 From South Jersey Currently Offline Reputation: 1 (100%) ![]() |
I recently returned home from school for the summer and noticed that my CF hood has all kinds of cracks/scratches all over it now. What can I do to fix this?
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
wax it and polish it is my guess.
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 13, '02 From So Cal Currently Offline Reputation: 3 (100%) ![]() |
have any pics of the damage?
-------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jan 19, '03 From South Jersey Currently Offline Reputation: 1 (100%) ![]() |
No, but I will take some and post them when I get the chance.
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) ![]() |
If the scratches are not too deep, then you can wet sand with 600 grit, 1000 grit, 1500, and then 2000. once you do that most the scratches should come out, and then you can buff to a clear shine
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Nov 29, '03 From Auburn, ca Currently Offline Reputation: 0 (0%) ![]() |
If they are anything like the cracks in my hood you're probably f****d, mine go down to the carbon fiber. good luck with yours.
|
![]() |
|
![]() Enthusiast ![]() Joined Jan 19, '03 From South Jersey Currently Offline Reputation: 1 (100%) ![]() |
Here are some pics of the damage..
![]() ![]() ![]() ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 13, '02 From So Cal Currently Offline Reputation: 3 (100%) ![]() |
yeeeouch!! thats horrible man. if it was superficial id say just sand it and regloss it but those go all the way down to the cf. im out of ideas short of using negative pressure to inject gloss resin inbetween the cracks
-------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 29th, 2025 - 5:19 PM |