other parts from other gens or other cars?, that fit celicas... performance parts too! Options

[cjh4l22]

looking to start a list of parts that will fit our 6th gens from other cars. whether it be the 7th gen short shifter slightly modified or the s2k antennas that work... -lets leave engines outta this for now?-

[_mikeE]

that fit on a GT (not sure about ST models)
OEM GT-4 rear strut brace
7th gen OEM front brakes & calipers and in theory can use the big brake kits for 7th gen celica
7th gen steering wheel
gt-4 steering wheel
7th gen gt-s rims
gt-4 tail lights
5th gen mirrors
7th gen seats with modifiying the seat rail/bracket
st202/st205 aluminum door sills
Neon strut bar fabricated to triangulate the oem GT front strut

that's all i can think of right now...i'll post more if i can think of any.

[CelicaST_CALI]

^^^^^Where was this reply for my pick and pull thread...WTF lol jk

[cjh4l22]

gt rear discs onto st
5th gen corners w/modification? fit 94-95s...
90-93gts fogs are same fogs found in 96-99s?
s2k antenna will replace
90-93gts lighted key ring will fit st. (find green/white wires)

[Shink]

06 Tundra courtesy lights
Volvo S70 washer jet nozzles

[CelicaST_CALI]

What exactly are courtesy lights??

[stevest202]

What exactly are courtesy lights??

interior light and door light the red one on door you see when open

[azian_advanced]

5th gen shocks and rear brake pads (except alltracs)
4th & 5th gen springs, struts and topmounts
5th gen stabilizer end links (including all tracs)
2000+ corolla windshield washer nozzles
4th, 5th and 7th gen GT oil filters and oil caps
st205 rear brake assembly (for GT only)
st185 'dual piston' front brake assembly
7th gen TRD short shifter
1993-1998 Supra steering wheel
impreza rims (or most 5x100 bolt rims for that matter)

[cjh4l22]

can we reorganize this and get it stickied(sp?)?

[rjbibeau]

mazda mx-3 fuel pump will work in our cars direct fit.

[cjh4l22]

nice find..
i think the supra fuel pump and injectors will as well... ?
i'm pretty sure the rx7 injectors do
and the walboro 255 fuel pump

[easternpiro1]

can we reorganize this and get it stickied(sp?)?

X2!!!!!!

[goferris]

from what i have read RX-7 injectors
corolla steering wheel (hell most toyota steering wheels LOL)
camry motor
mr2 motor parts
mr2 shift knobs
any 5x100 bolt pattern wheels (jetta, tc, rsx, 7gc, i can go on for a while )


did anyone ever find out if the scion pioneer headunit would work in our car? i thought someone was trying it out.

[azian_advanced]

you'll need a scion stereo wiring harness and rewire each wire individually with your currentl wiring harness.

[DEATH]

did anyone ever find out if the scion pioneer headunit would work in our car? i thought someone was trying it out.

I've got one laying around. If your looking for plug and play - it won't work. Can it be rewired - of course [pretty easily too and should fit the standard double din section].
I've got the 5 disc one if anyone wants to buy or trade for parts.

BTW - One for the above list: tC grill works with facelift bumper.

This post has been edited by DEATH: Feb 19, 2008 - 7:38 AM

[Shink]

92-96 Honda Prelude / Accord Cold Air Induction Intake
(Trim it down and it makes a good CAI, taking air in away from the block)

[CelicaST_CALI]

im loving this ****...

[easternpiro1]

ATTENTION ALL MODS: STICKY OR MUTINY WILL BE AFOOT!!!

[cjh4l22]

ATTENTION ALL MODS: STICKY OR MUTINY WILL BE AFOOT!!!

haha woot for starting a topic to be stickied! yea umm...
pretty sure supra/mr2 steering wheels will fit too
and wasn't sure if ppl knew but some celicas came w/out a drivers airbag, its like a skinner steering wheel that also fits...
some of the engine basics...
the geo prizms w/7afe's obviously have similar engine components
some mkII mr2's, 5th gen celica gt(s) and early/mid 90's camrys have the 5sfe's

other stuff?
i'm curious as to what else from newer/older celicas, mr2's and supras will fit...

[96bluevert]

Apparently 7th gen stock spoilers will fit a vert/coupe

You have to take into account that MANY MANY other parts from ALL different type of cars can fit with enouph customizing/money.

[DEATH]

Apparently 7th gen stock spoilers will fit a vert/coupe

True - I have one in white for sale if anyone wants it.

[thespacepanda]

Apparently 7th gen stock spoilers will fit a vert/coupe

True - I have one in white for sale if anyone wants it.

Really? What does it look like?

[ImportChick95]

Apparently 7th gen stock spoilers will fit a vert/coupe

True - I have one in white for sale if anyone wants it.

Really? What does it look like?

X2 .. got pics of it on your car?

[thespacepanda]

Apparently 7th gen stock spoilers will fit a vert/coupe

True - I have one in white for sale if anyone wants it.

Really? What does it look like?

X2 .. got pics of it on your car?

He's gotta hatch. But I have a white coupe....

[mywhite94celicag...]

92-95 honda civic cold air intake will work if u cut about an inch off of one side and 2 inches on the other side. thats what i had on my celica.

[easternpiro1]

Apparently 7th gen stock spoilers will fit a vert/coupe

You have to take into account that MANY MANY other parts from ALL different type of cars can fit with enouph customizing/money.

really?!?!??? i gotta see this!

[CelicaST_CALI]

so will any spoiler on a 7th gen fit on a coupe or just the stock spoiler??

[DEATH]

Apparently 7th gen stock spoilers will fit a vert/coupe

True - I have one in white for sale if anyone wants it.

Really? What does it look like?

Um - a white 7th Gen spoiler? It def looks like it will fit and it looks alot like the facelift spoiler for hatches - would look good on your car. I'll make you a great deal.

X2 .. got pics of it on your car?

No - I have some pics of it on the front of o0black0o's car as a joke.

[tin_foil]

stop hijacking the thread. I wanna know about more parts; this is one of the best threads I've ever seen on the 6gc forums.

[hongkongnerdboy]

would HIR lights off a tractor count?

[ImportChick95]

Will rearview mirrors from '93-97 Corollas fit our cars? Somebody please confirm this. I need one asap!

[hatchy_gt-s]

90-93gts fogs are same fogs found in 96-99s?

tried that it doesn't bolt setup is different but if u did get them to work let me know cause i had to buy mine from yoter and it was pricy

[Valo666]

pretty much any toyota shiftknob will fit on a stick celica. I was driving a 89 Trecel yesterday at work and they have an OEM ball shiftknob thats extreamly similar to the ball style TRD knob.

[mikecelica]

dont know if this is alreaady covered but anyone looking for a stage 2 clutch, you can get one thats for these cars from exedy:

Part # : 16950

94-99 TOYOTA CELICA 1.8 7AFE/1ZZ-FE
00-05 TOYOTA CELICA GTS 1.8 1ZZ-FE/2ZZ-GE VVLT-1
93-97 TOYOTA COROLLA 1.8 7A-FE
03-06 TOYOTA MATRIX 1.8 1ZZ-FE/2ZZ-GE
86-89 TOYOTA MR-2 1.6 4AGE
00-05 TOYOTA MR-S SPYDER 1.8 1ZZ-FE
03-06 SCION XA
03-06SCION XB

[Valo666]

i forgot to add that rear ash trays off early 90s *like 92, 93 etc* corolla's will fit. I broke mine and grabbed on off a 94 corolla 4dr and it fit fine.

[Chucky]

dont know if this is alreaady covered but anyone looking for a stage 2 clutch, you can get one thats for these cars from exedy:

Part # : 16950

94-99 TOYOTA CELICA 1.8 7AFE/1ZZ-FE
00-05 TOYOTA CELICA GTS 1.8 1ZZ-FE/2ZZ-GE VVLT-1
93-97 TOYOTA COROLLA 1.8 7A-FE
03-06 TOYOTA MATRIX 1.8 1ZZ-FE/2ZZ-GE
86-89 TOYOTA MR-2 1.6 4AGE
00-05 TOYOTA MR-S SPYDER 1.8 1ZZ-FE
03-06 SCION XA
03-06SCION XB

So the clutches from this list of cars are all the same?

[mikecelica]

the stage 2 from EXEDY one clutch fits all i dont know if oem clutches are one fits all or other companies

[daazndood]

from what i have read RX-7 injectors
corolla steering wheel (hell most toyota steering wheels LOL)
camry motor
mr2 motor parts
mr2 shift knobs
any 5x100 bolt pattern wheels (jetta, tc, rsx, 7gc, i can go on for a while )


did anyone ever find out if the scion pioneer headunit would work in our car? i thought someone was trying it out.

rsx is 5x114

[CustomIce]

Gen 7 M-sport alloys fit and look really nice

I have heard the 4AFE head will fit the 7AFE engine block, but i'm not sure about the waterways, some may not line up properly?

[playr158]

st205 rear brake assembly (for GT only)
st185 'dual piston' front brake assembly

I believe the ST185 fronts only work the the ST (could be wrong)
and since the GT rear fits on the ST (hubs/bearings are the same) what makes you say the St205 is GT only rear?

[mikecelica]

From what other car does a gas tank fit a 6gc?

[azian_advanced]

st205 rear brake assembly (for GT only)
st185 'dual piston' front brake assembly

I believe the ST185 fronts only work the the ST (could be wrong)
and since the GT rear fits on the ST (hubs/bearings are the same) what makes you say the St205 is GT only rear?

my bad.. i was wrong. totally forgot about the fact the gt discs can be swapped into the st.
i also looked into this a bit more, the st205 rear brake assembly won't fit in either the gt or st. the knuckle on the gt-four is different (from the awd of course), and after personally trying a set of superstrut rear shocks (the bolt pattern is narrower, only the springs and mounts work which i'm using now) and a few statements from another member explaing the e-brake components being totally different too.

This post has been edited by azian_advanced: Mar 16, 2008 - 10:39 PM

[razor7]

Time to revive an old thread...

So, as most of us know, the front strut bar is the same as the universal 94-99 Dodge Neon. What about the rear though?
Ebay Listing
This would be pretty important for some of the users here since there are a bunch of Ebay sellers that will sell BOTH (front and rear) for $20.

-TC

This post has been edited by razor7: Oct 9, 2008 - 6:52 PM

[cjh4l22]

stop hijacking the thread. I wanna know about more parts; this is one of the best threads I've ever seen on the 6gc forums.

thank you i agree
lets get some more parts up here!!

[zeus83]

what abt 7gen front brake pads fit ST202 3SFE?

[OrbitalGT95]

I heard that a 2JZ bolts right up to the celica

[GotToyota]

5th gen shocks and rear brake pads (except alltracs)
4th & 5th gen springs, struts and topmounts

So 5th gen shocks/springs work, can someone confirm this?

-Matt

[Supramanecko]

PUt a 2JZ-GTe (supra motor) in the celica

its possible and it will run like a beast

[Daftboy]

Anything is possible, its just how deep your pockets go...

[njccmd2002]

pretty much any toyota shiftknob will fit on a stick celica. I was driving a 89 Trecel yesterday at work and they have an OEM ball shiftknob thats extreamly similar to the ball style TRD knob.

try the paseo shift knob, its better!!!1

[njccmd2002]

has anybody tried the 7th gen strut bars, I mean is the lenght the same. Maybe a different hole pattern?

[easternpiro1]

Time to revive an old thread...

So, as most of us know, the front strut bar is the same as the universal 94-99 Dodge Neon. What about the rear though?
Ebay Listing
This would be pretty important for some of the users here since there are a bunch of Ebay sellers that will sell BOTH (front and rear) for $20.

-TC

proof please!!!

[razor7]

Time to revive an old thread...

So, as most of us know, the front strut bar is the same as the universal 94-99 Dodge Neon. What about the rear though?
Ebay Listing
This would be pretty important for some of the users here since there are a bunch of Ebay sellers that will sell BOTH (front and rear) for $20.

-TC

proof please!!!

I'm actually going to get one and try it out. Doesn't seem like anyone has any info on it, and since it's so cheap, I can find another use for it if it doesn't work.

If anyone has tried it already, please chime in. I'd love to hear what you have to say!

-TC

[GriffGirl]

has anybody tried the 7th gen strut bars, I mean is the lenght the same. Maybe a different hole pattern?

Different hole pattern. Am currently in the process of modding one for my own car

[njccmd2002]

what about length, holes can be drilled!

[razor7]

what about length, holes can be drilled!

Yeah, that's my main concern. I have no issue re-drilling the holes, already did it for the front one! :-D

-TC

[azian_advanced]

5th gen shocks and rear brake pads (except alltracs)
4th & 5th gen springs, struts and topmounts

So 5th gen shocks/springs work, can someone confirm this?

-Matt

i put my 6th gen shocks on my dad's old 5th gen. so 5th gen shocks should technically work on a 6th gen.

[whatthe]

5th gen shocks and rear brake pads (except alltracs)
4th & 5th gen springs, struts and topmounts

So 5th gen shocks/springs work, can someone confirm this?

-Matt

i put my 6th gen shocks on my dad's old 5th gen. so 5th gen shocks should technically work on a 6th gen.

your dad drives a 5th gen? AWWSOMEE

[njccmd2002]

what about length, holes can be drilled!

Yeah, that's my main concern. I have no issue re-drilling the holes, already did it for the front one! :-D

-TC

so did you fit the 7th gen bar for the front?

[dgbldr]

6th gen convertible inside rearview mirror is same as 90s Corolla and Geo Prizm. Identical. Can't speak for coupe and hatch cars.

[BloodyStupidDave...]

* Chrome door catch from Lexus'
* Chrome door handles from Avensis (with modding)
* Chrome gear gaitor garnish from Lexus

This post has been edited by BloodyStupidDavey: Oct 29, 2008 - 3:07 PM

[njccmd2002]

so did anyone confirm about the strut bar.

[njccmd2002]

so did anyone confirm about the strut bar.

x2 bump

[GriffGirl]

d'oh, I TOTALLY forgot about this thread! I haven't drilled the holes still, but I'm telling you, length-wise, it's totally fine. I checked that a long time ago! Here's a link to the Tanabe Racing Development web site (the one on the Tanabe site is the "generic" photo, not the actual one I have)

Here's a picture that looks like the one I have:



What I've actually done with my strut bar is I sanded down the bracket thingies (end plates) through the paint down to the metal, roughed it up some, and filled in the holes with steel reinforced putty. I packed the putty in tightly (to eliminate air pockets) and smoothed it just outside of flush to the end plates to allow for shrinking when it set. After leaving it a few days, I sanded the putty down to be flush to the end plates, so all I have left to do is drill new holes and repaint the end plates.

This post has been edited by GriffGirl: Nov 11, 2008 - 1:23 PM

[cjh4l22]

shimless buckets for the 2nd/3rd gen 3sgte's from the 1zz 7th gen engine

[Sick_Puppy]

What about sunroofs? Any similarities between the Celica/Curren and corollas/ paseos/ coronas etc?

[trdproven]

These listings before being stickied should be confirmed and then organized first.

[azian_advanced]

97 solara starter... confirmed. been using one for my 5sfe for 3.5 years

This post has been edited by azian_advanced: Feb 12, 2009 - 6:52 PM

[chacha]

update...sorry for bringing up old thread...im going through replacing parts that are worn like the jet nose sprayer on the hood...cheaper but good or better performance parts... ALWAYS a big + !!

confirmation of a better list of interchangeable parts to the data would be nice; more order

This post has been edited by chacha: Feb 18, 2011 - 8:23 PM

[cjh4l22]

I'll look over these if the people that helped add some of them can confirm with a picture of some sort (unless self-explanatory) or cite a reference perhaps?

[BK94ST]

from what i have read RX-7 injectors
corolla steering wheel (hell most toyota steering wheels LOL)
camry motor
mr2 motor parts
mr2 shift knobs
any 5x100 bolt pattern wheels (jetta, tc, rsx, 7gc, i can go on for a while )


did anyone ever find out if the scion pioneer headunit would work in our car? i thought someone was trying it out.

The Pioneer headunit does work. The factor harness plugs in without any modification. I modified the radio face plate because I didn't want to modify the center trim piece. You need to cut aprox. 1/4 inch off of both sides of the unit.

Also, 1990-93 4 cyl. Accord CAI (two piece) works great with some minor modification.

[njccmd2002]

I have a shift knob from a paseo..

Does anyone know if the trd shifter of a 7th gen fits?

[96stgreendemon]

yes the TRD shifter from a 7th gen will work, also from a tc, i believe that most toyota knobs are interchangeable

[schmooot]

i believe that most toyota knobs are interchangeable

Yah any toyota knob will thread on....I haven't seen one that isn't the same yet...of at least a dozen different models

[njccmd2002]

yes the TRD shifter from a 7th gen will work, also from a tc, i believe that most toyota knobs are interchangeable

Are u sayin the shifter assembly fits? or just the knob

[kavy]

Front stabilizer links off a AE110 corolla-Perfect fit.

[96stgreendemon]

Im not sure if the entire assembly will swap in but hell even the shifter swaps over so the knob will definately

[cjh4l22]

I'm thinking we keep this alive till... the end of the week? and then I'll be happy to go through it all and repost/reorganize to get it stickied. (organized by... part type? engine/suspension/etc...)

[chacha]

volvo jet nozzles? which one...i need a picture to verify

[barterj]

Front ABS sensors from 1991-96 Camry, I used one from a Camry to replace a bad sensor in my car, if needed I can try to get a pic to verify

Also e-brake hardware from 91-01 Camry, if you're cheap or in college like myself and the junkyard is your friend

headlight pigtails (high and low) from 1992-98 Pontiac Grand Am, well really any car that uses 9005 and 9006 head lamp bulbs, got mine from a grand am because the original ones had melted for a some reason

This post has been edited by barterj: Feb 23, 2011 - 12:07 AM

[CelicaRacer97]

ATTENTION ALL MODS: STICKY OR MUTINY WILL BE AFOOT!!!

haha woot for starting a topic to be stickied! yea umm...
pretty sure supra/mr2 steering wheels will fit too
and wasn't sure if ppl knew but some celicas came w/out a drivers airbag, its like a skinner steering wheel that also fits...
some of the engine basics...
the geo prizms w/7afe's obviously have similar engine components
some mkII mr2's, 5th gen celica gt(s) and early/mid 90's camrys have the 5sfe's

other stuff?
i'm curious as to what else from newer/older celicas, mr2's and supras will fit...

[Artega]

I believe it was said on this forum that Supra Brake pads will fit on the front ST205 four pot brake.

I can't find the thread that confirms it.
confirmation anyone?

[schmooot]

yup, I heard that too...not confirmed though

[KAOS]

update...sorry for bringing up old thread...im going through replacing parts that are worn like the jet nose sprayer on the hood...cheaper but good or better performance parts... ALWAYS a big + !!

confirmation of a better list of interchangeable parts to the data would be nice; more order

Walker and I used the washer nozzles from a Totoya Corolla (2002), works just fine, need to possibly extend the hosing, but I didn't have to.

Don't remember the part #'s, maybe he's got them somewhere... I'll ask him and get back to you.

PS these Corolla nozzles change the stream from JET to MIST (which I prefer)

This post has been edited by KAOS: Mar 2, 2011 - 10:24 AM

[Artega]

update...sorry for bringing up old thread...im going through replacing parts that are worn like the jet nose sprayer on the hood...cheaper but good or better performance parts... ALWAYS a big + !!

confirmation of a better list of interchangeable parts to the data would be nice; more order

Walker and I used the washer nozzles from a Totoya Corolla (2002), works just fine, need to possibly extend the hosing, but I didn't have to.

Don't remember the part #'s, maybe he's got them somewhere... I'll ask him and get back to you.

PS these Corolla nozzles change the stream from JET to MIST (which I prefer)

YES
that is exactly the part I was looking for!

Will need to order that now.
Thanks!

[Culpable04]

yup, I heard that too...not confirmed though

confirmed !

Supra twin turbo brake pads ( front and rear ) are the exact same ones as ST205

[cjh4l22]

ok folks, toss in any that are left ASAP, i'm gonna open a new thread here in a few to re-organize. hopefully to be stickied!

[kavy]

From experience: A caldina fourteen inch front hub is an exact fit for the fifteen inch in the ST202 given that the rotors,brake assembly and the housing for the wheel bearing is resused.

[chacha]

48800-ZT300
Toyota - Celica - ZZT231 - Front and Rear TRD sway bars

Compatible with Toyota - Celica - ST202

According to nengun.com

This post has been edited by chacha: Apr 2, 2011 - 9:37 PM

[njccmd2002]

48800-ZT300
Toyota - Celica - ZZT231 - Front and Rear TRD sway bars

Compatible with Toyota - Celica - ST202

According to nengun.com

easy way is to get some swaybars from the celica and measure... nengun may be wrong..

[chacha]

that's true.....but i figure it should be easier getting the TRD sway bar of the 7gc to put it to the test, im sure there's gotta be a member here who does have the 7gc with the TRD sways....anyone who does want to venture this out and test it for the community...that would be pretty cool to have these as an option.

[BonzaiCelica]

so 5th generation ST184 and ST182 Celica GT/GT-S Shocks along with the springs fit our 94-99 Celica??? I need to go to a checkyard tomorrow to get stock rear suspension.

[Lil-Joe101]

st205 radiator
powersteering resevior

[Euphoria]

so 5th generation ST184 and ST182 Celica GT/GT-S Shocks along with the springs fit our 94-99 Celica??? I need to go to a checkyard tomorrow to get stock rear suspension.

I want to know this for sure aswell as I want springs, heard 4th and 5th gens both match up springs/shocks.

[BonzaiCelica]

bump whether the 5th gen shocks and springs are the same because I see them all the time at the junkyard and very rarely see 6th gen celica's there...

[BonzaiCelica]

yes People Rear Shocks from the ST182/184 Celica work on our cars. The only difference is that the brake line bracket on the 5gc shocks are a bit different and will need modifying to make it fit our brake lines.

[block]

zip tie lol.

[96stgreendemon]

Hell i had brackets to use with my D2 coils..... i just used zipties lol

[Euphoria]

Anyone know if fronts fit too? and if its 4th and 5th gens?

[BonzaiCelica]

Anyone know if fronts fit too? and if its 4th and 5th gens?

that would be a good question?? what I can do sometime next weekend, is bring the front shocks that I have in my shed and pull off the 5th gen front shocks from the celica and meet both parts up at the entrance of the door to see if they are the same size.