FS: Lots Of Parts For Sale!!!, EDIT: Prices Lowered!!!!! Options

[6strngs]

Got a new car, and basically anything I can't use on it is for sale, so here we go:

Custom oil filter relocation kit including canton racing engine side adaptor, 36 inch long stainless braided Russell hose, Summit hose ends, and a Trans-dapt filter side adaptor $195 shipped

SSAC ebay 3" downpipe. never cracked on me. wrapped in heat wrap and painted flat black with a high temp silicone paint. I'm sad my new car doesn't have a twin entry turbo otherwise I'd be using this already. It has 3 o2 sensor bungs. one primary stock one, one for the stock secondary sensors (CA spec and 96+) and one for a wideband. I'll include a plug for one if I can find it. $85 shipped


Custom made stainless steel oil feed and drain line. comes with an oil pan with a fitting already welded onto it. $110 shipped


Custom made 3" intake for 5sfte set-ups, includes nipple so you can connect your PCV line $40 shipped


FMIC, 26x6x2.5 -ish (not sure exact dimensions but can measure for you) all piping, couplers and clamps have been sold already. $85 shipped


Fidanza lightweight flywheel for manual transmission 5sfe's $210 shipped sale pending


3sgte 7-bolt twin entry manifold SOLD!
460cc RX7 injectorsSOLD!
TWM short throw shifter SOLD!
Piping, couplers, clamps SOLD!
Walbro Fuel Pump, GSS-342 with 400-765 install kit SOLD!
coolant lines for the CT-26 SOLD!
3sgte 2bar map sensor SOLD!
Lotek A-pillar 3-gauge pod SOLD!
Kirk-o-saurus polyurethane motor mount inserts SOLD!
Dodge neon front strut bar modified to fit 6GC SOLD!
Tein S-tech springs SOLD!
I think that's everything...

This post has been edited by 6strngs: Oct 9, 2008 - 11:42 PM

[02bluerolla]

if the fuel pump does not go through let me know

[6strngs]

will do, updated first page with the rest of the stuff.

[phantom]

would you happen to be selling a 5 speed shifter, i dont mind if its a short shifter or the OEM, i want to swap my auto trany to a manual.

[RUNNIN-LOW]

pm'ed

[MaskedMan]

I'm interested in the Flywheel, the Motor mount inserts, and the Short shifter. I will be able to pick them up in person if you still have them in a few weeks.

[azn87]

maybe intrested in s tech springs if i can get my car drivable again

[6strngs]

would you happen to be selling a 5 speed shifter, i dont mind if its a short shifter or the OEM, i want to swap my auto trany to a manual.

No, sorry, I'm selling the lever only and not a whole assembly. and I need my stock assembly for when I get this car back on the road. I'm just selling off the aftermarket stuff cause it's going back to stock. I am not parting out the car.

I'm interested in the Flywheel, the Motor mount inserts, and the Short shifter. I will be able to pick them up in person if you still have them in a few weeks

motor mount inserts are probably already sold, but I've got the flywheel and shifter still. The shifter is still in the car however and I'm not sure when I'll have time to remove it. the flywheel is out of the car and ready to go. Let me know if you want to pick up or have them shipped. We won't have to go through the hassle of greyhound this time if you want them shipped. lol

maybe intrested in s tech springs if i can get my car drivable again

Parts are going quicker than I thought they would, so let me know

[6strngs]

Motor mount inserts and A-pillar gauge pod are sold to RUNNIN-LOW

[Aoshix]

interested in your teins pm sent

[bizzerk]

is the strut bar still up for sale?

[6strngs]

is the strut bar still up for sale?

well, somebody told me that they would get it, but they have not sent payment yet. So, technically yes.

[bizzerk]

is the strut bar still up for sale?

well, somebody told me that they would get it, but they have not sent payment yet. So, technically yes.

does it have any bumping issues? fit a 94 st?

[mneal2_92788]

interested in the shifter...pm me please

[6strngs]

is the strut bar still up for sale?

well, somebody told me that they would get it, but they have not sent payment yet. So, technically yes.

does it have any bumping issues? fit a 94 st?

not sure what you mean by bumping issues. but it'll definately bolt up to your shock towers. I can't guarentee it'll clear your engine components since I have a GT, but I'm 98% sure that it will

[6strngs]

The "dibs" are currently as follows:

Fuel pump: D-man, 02bluerolla
map sensor: D-man
strut bar: Jared95, bizzerk
Flywheel: MaskedMan
Shifter: MaskedMan, mneal2_92788
Teins: dnyluong, Aoshix

I'll try to serve on a "first come, first served" but I can't hold the stuff forever. it's more like a "first come with money, or at least a commitment to buy, first served"

[DEATH]

is the strut bar still up for sale?

well, somebody told me that they would get it, but they have not sent payment yet. So, technically yes.

does it have any bumping issues? fit a 94 st?

not sure what you mean by bumping issues. but it'll definately bolt up to your shock towers. I can't guarentee it'll clear your engine components since I have a GT, but I'm 98% sure that it will

It will - I've installed a Neon strut bar on a 7A equipped Celica before. As for the bump thing I think he/she mistakenly thinks this will cause an overly stiff ride [like performance/cheap struts can etc]
Hope this helps

[D-Man]

no dude, bumping issues is reffering to hitting the hood and laying on the PS fluid tank. It's happened to someone else here...

EDIT: http://www.6gc.net/forums/index.php?showtopic=58674&hl=
That's where it's happening...

This post has been edited by D-Man: May 21, 2008 - 9:22 AM

[6strngs]

no dude, bumping issues is reffering to hitting the hood and laying on the PS fluid tank. It's happened to someone else here...

EDIT: http://www.6gc.net/forums/index.php?showtopic=58674&hl=
That's where it's happening...

well, this bar isn't perfectly straight, it's got a curve in the middle. if I had the curve pointed upwards, the hood wouldn't close, so I adjusted it so it curves towards the front of the car and it works great!

[bizzerk]

Payment sent

haha thanks for clearing that up D-man thats what i was trying to ask.

[6strngs]

Neon strut bar sold.

[6strngs]

pics added on some stuff. I think I have pics of the other stuff, I just have to find them...

[6strngs]

Tein springs sold!

[njccmd2002]

are you going to sell the car

[6strngs]

are you going to sell the car

I wanna put a new engine in it first, but yeah, eventually it'll be sold.

I know this is a longshot, but if somebody from a state other than CA was interested in this car, I could put a 3sgte in it for them instead of another 5sfe. then it'll be the buyer's responsibility to smog it. which will be impossible here, but legal in other states. Of course, the buyer would have to pay for the clip, but ST185 clips aren't too expensive. maybe they'll give us a deal if we get 2 engines so I can get a 2nd or 3rd gen 3sgte for my alltrac at the same time.

This post has been edited by 6strngs: May 24, 2008 - 9:37 AM

[njccmd2002]

instead of spending money, just sell the shell. just my 2 cents.

[6strngs]

instead of spending money, just sell the shell. just my 2 cents.

well, I highly doubt I'd get more than $1000 for the shell. but, if I put $800-1500 into it, I can get $3500-4500 out of it. More work, but more money in the end.

[mgpmatt]

short shifter still available? if so e-mail me at mgold87@gmail.com

[6strngs]

bump

[6strngs]

Just want to state, again, that I'm NOT parting out the car, I'm only selling the things listed in the first post. Not OEM parts off my car.

[SilvertopST]

pm sent

[bizzerk]

quick questions i received the bar but the bar does not have the mounts on it to attach to my car. was the mounts included in the deal or just the strut?

[6strngs]

pm sent

PM'd

quick questions i received the bar but the bar does not have the mounts on it to attach to my car. was the mounts included in the deal or just the strut?

I did send the mounts... PM'd

[6strngs]

bump

[6strngs]

bump. first post updated, prices lowered!

[6strngs]

2 bar map sensor is sold!

[6strngs]

bump!

[6strngs]

bump. the coolant lines are sold. all the piping, couplers and clamps for the FMIC are about to be sold, but the FMIC itself is still up for grabs. The shifter can be considered sold as well.

[6strngs]

bump, fuel pump and all piping couplers and clamps have been sold.

[azn87]

let me know if shifter had been sold yet

[6strngs]

bump, I really need some money...

[6strngs]

Short shifter SOLD!

This post has been edited by 6strngs: Jul 20, 2008 - 4:29 AM

[celicast3sgte]

im partially interested in the rx7 injectors just because i one day MIGHT turbo a 5sfe.. pm me a price

[d0w0rkS0n]

heyy, sorry if i missed a post sayin if it was sold or not. but i am highly interested in the map sensor. and also, ur post says the clamps are sold for the front mount, but you still have the piping? if you still have these... please let me know. will make payment today!

[6strngs]

heyy, sorry if i missed a post sayin if it was sold or not. but i am highly interested in the map sensor. and also, ur post says the clamps are sold for the front mount, but you still have the piping? if you still have these... please let me know. will make payment today!

the map sensor, along with the intercooler piping, couplers, and clamps, are sold.

[6strngs]

injectors sold. prices reduced!

[Etak28]

injectors sold. prices reduced!

what do you still have for sale here buddy?

[6strngs]

injectors sold. prices reduced!

what do you still have for sale here buddy?

pretty much everything except the manifold you bought from me.

The list has been updated.

[Etak28]

would that intake work with my setup if i just relocated my battery and cruise control

This post has been edited by Etak28: Oct 10, 2008 - 12:33 AM

[6strngs]

would that intake work with my setup if i just relocated my battery and cruise control

I was using it with a CT26 turbo, but I was expecting it to also work with the T3/T4. so, I'm not 100% sure since I never test fitted it, but i'm fairly sure. If it didn't fit, all that would need to be done would be to cut a little length off it and it would fit. it wouldn't have a beaded end anymore, but that's not necessary for the intake since the pipe is under a vacuum, not a pressure like the intercooler piping. heck, I didn't even have beaded ends on my intercooler piping!

[Etak28]

hey, i sent u a pm yesterday. Ill buy that downpipe off of ya monday.

[costa]

hey u got that intake for sale?

[6strngs]

Yep, PM me if you're interested