AEROMAGIC!!, link to pic inside :| Options

[Theshanon]

GUYS!!!!!!!!!! I'm trying to find Aeromgics front lip for the 94 prefacelift bumpers. Theres no access to their site and i can't googles serch find it -_-. By anychance does anyone know where i can find one? Or maybe a replica of it :|

http://www.6gc.net/photo/part/397/3

Thanks guys

[95CelicaST]

I had one. I sold it to creis. You might want to PM him to see if he'll make a mold of it. Aeromagic hasn't made that for a very long time, and from what I understand they only made it in 94, because it didn't sell too well.

Good luck!

[goferris]

I had one. I sold it to creis. You might want to PM him to see if he'll make a mold of it. Aeromagic hasn't made that for a very long time, and from what I understand they only made it in 94, because it didn't sell too well.

Good luck!

that's sad because that's probably my favorite lip for the prefacelift bumper. good luck finding one.

[njccmd2002]

ithink there is a fiberglass one on ebay somewhere..

[D-Man]

x2 w/ trying to get a mold made of it.

If you can just talk Creis into taping it over and coating it with fg, and shipping that mold to you, you'd just hav to tape the inner mold and make it in reverse. You can guess that the FG would need to be about 1/4-2/3 in thick. with a light layer of body filler it'd be perfect.

The hardest part would be the hand sanding, but Considering Creis would be doing very little work, He / She probably wouldn't charge you much, short of the shipping and supplys. Play your cards right and it could easily become a replica @ a fraction of the cost.

EDIT per/ 95CelicaST (One post Down): Creis not Cries. (He's not an emo boy ya know)

Sorry Creis. (I'm Dyslexic )



This post has been edited by D-Man: Jun 23, 2008 - 2:44 PM

[95CelicaST]

The only problem with the lip I sold Creis (not cries... he isn't an emo boy ) is in two pieces - split down the center.

The good news is it isn't painted yet. Still in the black primer that I left it in.

[zero07]

Man i hadnt seen that lip, someone locate it and make some!

[Theshanon]

is it suppose to be a two peice lip kit??? and damn that sucks they don't make it anymore....it reminds me of the tom's lip for the face lift.....which ferris has and i am jelous of =( haah (looks sssssoooooooooo nice but i don't wanna change bumpers)

[Szachi87]

Hey I can help You.. in my country this part is available just look > http://www.spojler.pl/produkt/5402/toyota-...spojlery-tuning

[D-Man]

Man i hadnt seen that lip, someone locate it and make some!

do any texan folks have one? I can replicate it, but I'd need one to replicate

And i dont have the money to buy one

[95CelicaST]

is it suppose to be a two peice lip kit??? and damn that sucks they don't make it anymore....it reminds me of the tom's lip for the face lift.....which ferris has and i am jelous of =( haah (looks sssssoooooooooo nice but i don't wanna change bumpers)

No, it's not supposed to be in two pieces. It was cut for shipping reasons.

Hey I can help You.. in my country this part is available just look > http://www.spojler.pl/produkt/5402/toyota-...spojlery-tuning

Not the same front lip, sorry.

[Szachi87]

my bad, sorry

[creis]

The only problem with the lip I sold Creis (not cries... he isn't an emo boy ) is in two pieces - split down the center.

The good news is it isn't painted yet. Still in the black primer that I left it in.

well its in one piece now and painted but who all wants a clone and what are people looking for price wise? I'm deff be happy to make a few but it will take some time

[D-Man]

Oh, if you do, than holler at me. I'll get you the number to one of my resin suppliers and get you hooked up on materials.

[hongkongnerdboy]

im interested

[zero07]

x2!!!

[808celica]

x3

[bizzerk]

x4 =]

[creis]

thats enough motivation for me, I'll see what I can get done this weekend.

[bccentaur3]

X100 this will look sick on the gt-four front end.

[94celigts]

X5

[95CelicaST]

Oh Chris.... now your lip isn't going to be the one and only on 6GC....

[creis]

It will be the origianl of a select few though. Is it really that rare I though a few people had em already?

[95CelicaST]

Search through Member's rides. No one has it yet.

[bccentaur3]

Yeah, if you are serious I would like to know when you are going to do this. I would definatly have the money ready. But I'm not looking to pay like 300 for the lip. What price range for the lip is reasonable?

[Celiracer18]

fairly interested. id like to see what the replicas would look like and all before i decide probably.

[97Celica]

GUYS!!!!!!!!!! I'm trying to find Aeromgics front lip for the 94 prefacelift bumpers. Theres no access to their site and i can't googles serch find it -_-. By anychance does anyone know where i can find one? Or maybe a replica of it :|

http://www.6gc.net/photo/part/397/3

Thanks guys

Someone needs to learn how to do URETHANE on this site... on my 7th gen site there are people that can...seriously....whomever does will increase the popularity of the 6th gen by 1,000!! for real!

[94celigts]

To do URETHANE, you need molds made of aluminum or steel and you need a million dollar machine to melt the beads and liquid inject them into the mold. This is why it is not cost efficient nor even possible for a regular person to do so. Also companies and corporations are not going to ever start making new bodykits and molds for a 10 year old car. We are sh!t outta luck. Its too bad. But fiberglass has to be our friend. If anything making the fiberglass stronger by adding other polymers and chemicals to it fibers etc to it would be the best bet.

[97Celica]

We need to get rich people into 6th gens

[vincent_doggy]

Guys, I found the source of that AEROMAGIC lip, replica thou.

Will ship straight from HOng Kong, the only concern is need to cut in half for shipping.

Lemme know if u guys interested, then I can get a better quote for bulk order.

[zero07]

In half... no good, extra cash.

[bccentaur3]

YES PLEASE.... I could careless if its cut in half because its a replica anyway, meaning its fiberglass? Can you get a qoute now please?

[vincent_doggy]

YES PLEASE.... I could careless if its cut in half because its a replica anyway, meaning its fiberglass? Can you get a qoute now please?

Yes, fiberglass

Any package that exceed the length of 1.5 meter is not allowed

so have to cut in half, will check tomorrow, now is midnite here

[Shigexile]

I talked to JP auto, the company that makes them, and he said that they still make them in their mother company in Japan. I havn't heard anything from them since but for the lip the price will be $355. Maybe i can talk them into a GB? What you guys think?

[bccentaur3]

DAYAMMMMM 355 plus shipping. Thats a little too steep for me. Vincent, you've got to do something to help us fllow 6th geners out.

[Celiracer18]

tell me some prices and ill consider it. 355 might be a little steep but if its the only way it might be worth it.

till then i gotta stop pulling so far forward in the parking spots, these curbs would tear anything apart

[bccentaur3]

355 shipped would be okay I guess. Lets do a group buy for 250 shipped?

[creis]

When I get the first one made I'll have an exact price, but I was ball parking $150 + shipping because its not that hard to make and the cost of the supplies for me is resonably low.

[Theshanon]

lol looks like i started a buisness for some people.... think i should deserve a free lip or discounted price =P i knew the rarety of this lip but now so much people seem so interested hahaah. Just love how simplistic is looks and how it just flows sooooooo well with the car

[jason]

i would be down for a lip or two myself

[zero07]

$200 shipped and i'm all over it!

[tomazws]

I'll even downgrade to a pre-facelift bumper to fit this thing!

Count me in!

[D-Man]

wait, WHO is gunna be making replicas? because i dont trust many people to replicate things in FG and do a good job. It's HARD work; and requires alot of skill and attention to detail.

Honnestly, i think i trust 2 people other than myself to make good replications... One is the guy that taught me, and the other is the guy i buy my FG from... WHO is doing the replicating, and where is your portfolio?

[bccentaur3]

150 plus shipping??? DEAL!!!!! . I know its not final yet, but even if its 200 plus shipping you can count me in.

[WH95TE]

is there a 95+ version of this lip?

[808celica]

is there a 95+ version of this lip?

isnt this the 94-95 prefaced
and the toms lip the 96- faced........

they are the same styling right???

well anyone got a better pic of this lip????

[azian_advanced]

DeW_H0e_GT

chrisc once sold it to DeW_H0e_GT, then it got passed down to other members.
i pmed chrisc but he no longer sells this lip anymore.


here are some others..






Otherwise if you want a similar look, Eurou has a lip for the 94-95 bumpers


This post has been edited by azian_advanced: Jul 15, 2008 - 4:33 PM

[95CelicaST]

I bought it from Dew Hoe GT and sold it to Creis. Thats where it's at now. By far my favorite lip for the 94-95.

[vincent_doggy]

This one is for pre-facelifted, seems bigger than the facelifted one, still call AeroMagic?

[808celica]

Mmmmm tasty

[CrimsonSTX]

Definitely interested in this lip.

[Legit94GT]

When I get the first one made I'll have an exact price, but I was ball parking $150 + shipping because its not that hard to make and the cost of the supplies for me is resonably low.

Count me in for in one

maybe two once i get my other celi


Has there been any progress made on the mold or manufacturing of this yet?

[vincent_doggy]

I ordered a piece last week, should be here any minute... say monday

It's time for me to try fit that replica... I will let u guys know the fitment and how heavy is the lip then I can tell how much overall including shipping

I don't have intention to swap until I fxxked up my left front end including the front ssIII splitter.

This post has been edited by vincent_doggy: Jul 19, 2008 - 3:00 PM

[bccentaur3]

Well hurry up. We've got a game to win.

[GotToyota]

If you know how to make the lip out of FRP, DO IT! For anyone that knows about this stuff, it can be twisted, bended, folded in half, and IT WON'T CRACK!

It might be a little more expensive, but you can save shipping costs by folding them. Here is a picture of a side skirt being twisted:



Sell these in the factory black like that, and we can either paint them or leave them like that. I say $200 shipped or below would be a good goal.

-Matt

[97Celica]

I might be interested in 2 of these if you can make them flexible.

[azian_advanced]

it'd be nice if they were flexible, but isn't that being a little too picky?
as long as i can get a hold of this, fiberglass or not, i'd take one.

vincent, where did you get yours from?

[Celiracer18]

X2 on that. I Found my paint gun and wanna do something with it now.

[GotToyota]

What's the point of having a fiberglass lip if it will crack easily? I'd rather have the flexible lip any day.

[bccentaur3]

I could careless if its flexible or not. I'm sure a lot of us preface lift guys would kill to have these. It will especially give us gt-four front end guys another subtle looking option.

[bccentaur3]

Any update?

[vincent_doggy]

Here we go, Just got it earlier today.

Not yet really fit on yet, would wait for next week once paint my car.

The quality is pretty good thou, but I don't like the smell of Fibre Glass, make me sick.

Cost me approx USD$170 for pick up, 1 week ordering time, the limitation of length of a air parcel for most of the countries are 1.5 meter, this thing exceed that, so have to cut in half, then need some magician or some expert to do a surgery to reinstate it







This post has been edited by vincent_doggy: Jul 28, 2008 - 12:41 PM

[azian_advanced]

that's a TOM'S replica lip, not an Aeromagic lip.. which sucks for the 94-95 owners who were looking forward to getting an aeromagic lip.

[bccentaur3]

Yeah.... Thats a TOM's lip. Will you be getting the Aero Magic lip at all? Or did us pre-face lift guys get our hopes up foor nothing?

[Celiracer18]

creis you got an update? i was kind of thinking that hed get a toms lip since he had a facelift bumper before. im still crossing my fingers for creis to come through

[vincent_doggy]

Oh, silly me, sorry guys

[bccentaur3]

Ouch Vince. I'm going to cry myself to sleep now.

[Celiracer18]

I did too but then i looked for like 6 hours and couldnt find any aeromagic stuff anywhere on the net. Looks like creis has the last one and could be the only chance we have a getting one. IMO we have creis do it or try to get him to a shop that will make them (we'd probably have to set up a group buy then). Hopefully Creis will see this and give us an update soon

[Theshanon]

lol guess he never saw it..... =(........ i refuse to do any exterior modifications unless i can get this front lip, or maybe something that can satisfy me just as much....... grrrrrr >.< but i do thank everyone so far for their help at my attempt to find this rare piece of beauty *sigh*

[Slick]

Just found this post. Any updates? i'm interested!

This post has been edited by Slick: Sep 25, 2008 - 1:35 PM

[Theshanon]

hmmm if people can make the ss-III spliters work on the preface, why not somebody try fitting the toms lip on a preface lift?? =P

[vincent_doggy]

hmmm if people can make the ss-III spliters work on the preface, why not somebody try fitting the toms lip on a preface lift?? =P

http://www.6gc.net/forums/index.php?showtopic=62131




This post has been edited by vincent_doggy: Sep 28, 2008 - 12:20 PM

[808celica]

any chance i could just get the sides of this lip?? i wanna see if the mid section cutout would look good on a prefaced.

[vincent_doggy]

any chance i could just get the sides of this lip?? i wanna see if the mid section cutout would look good on a prefaced.

[808celica]

Ooooo, but i kinda want a small trail of the mid section. what's the cost to have it shipped to 96731??? maybe before you cut another one could you lmk?? i'll try p/s the cut section i want

[Celiracer18]

CREIS!!!!!!!!!!!!!!!!!!!!!!!!!!! we neeeeed you! I really want this still. PM will be sent out tomorrow regarding what is up with the one you had and whether or not you're gonna do anything with it.


PM Sent!

This post has been edited by Celiracer18: Oct 3, 2008 - 11:19 AM

[azian_advanced]

i think you guys should just give up on this...

go and order yourself a eurou lip instead.. looks almost like an aeromagic lip..

[Celiracer18]

if it went better with TRD sides id get it. I'll give the aeromagic one a little more time and if that falls through ill just get it

[Theshanon]

gahahah ive been on that wait game for a whileeeee

[azian_advanced]

there is still hope you guys
Aeromagic lip on ebay!!! YAAA!

This post has been edited by azian_advanced: Oct 10, 2008 - 11:24 PM

[808celica]

AAAHhhhhhh!!!!!!!!!!!! Damn too far

[Daftboy]

i think the eurou flows fine with the trd sides.....404 sides with eurou front

This post has been edited by Daftboy: Oct 11, 2008 - 3:35 PM