**UPDATED** FS: All the parts I have left!!, 5SFE, Inside parts, Clusters, blower motor, tails *NEW PICS* Options

[ETNRIDER]

***UPDATE 3-09-10 *******************************************************
I still have a bunch of parts or somehow have ended up with more!!! If anyone needs anything let me know!

Complete disassembled 5SFE from a 1994 Camry. A reliable friend got to hear it run before I bought it. It smoked a good amount and had a hit pinging noise coming from the motor. I bought it and disassembled it expecting to find something broken and everything looked okl. The number 2 piston appeared to have bad rings and the cylinder wall was black. I have all the parts for the motor except the oil pan bolts and two bolts for the water pump.

I have the complete wiring harness in good shape; I think I found one plug that was damaged.

I also have a ton of other misc parts for the 6g as seen below. I have mostly interior pieces (not the radio trim), a blower motor in good shape, tail light, etc. Let me know what you are looking for I will try to post pictures of all this stuff asap, just checking to see what the interest is.

Thanks,
Chris

***********************************

Make an offer on any of the parts you see in the pic.



Detail shots of the door panels, not in bad shape have a few marks on them..





Passenger side under panel...


AC / Heater blower


I WANT THIS STUFF GONE!!!! Please make offer on anything.

Thanks

This post has been edited by ETNRIDER: Mar 9, 2010 - 10:37 AM

[Fastbird]

DRIVERS SIDE A-Pillar.......how much? I need one that hasn't had a gauge pod mounted on it.

[ETNRIDER]

Rear hatch cover is SOLD!!

Drivers sdie pilar SOLD (Pending shipping quote)!!

This post has been edited by ETNRIDER: Aug 5, 2008 - 7:18 PM

[njccmd2002]

how much for the bezel around the steering wheel, where the dimmer is

[SlickCelica]

Give me a price for the interior door panals shipped to GA if your willing to ship.

[Nyczroflz]

do u have white guage clusters?

[daazndood]

do u have the little plastic thing that the trunk tray thingy slips into?

[stetsonaw]

are either of those guage clusters from a manual 96+?

[ETNRIDER]

Give me a price for the interior door panals shipped to GA if your willing to ship.

PM me your address, I am going to Chattanooga this weekend if you are close to there I could meet you.

do u have white guage clusters?

Yes, They work but one wire has been cut. Could easily be fixed PM me an offer shipped if you would like them.

how much for the bezel around the steering wheel, where the dimmer is

PM sent

do u have the little plastic thing that the trunk tray thingy slips into?

I don't think so, do you have a pic of the part you need?

are either of those guage clusters from a manual 96+?

I don't know what they are out of, can I tell by a part number or other way?

[stetsonaw]

manual gauge cluster doesn't have the gears next to the gas/water temp gauges. year, i dunno. don't worry about it, keep them out there, i'll find one here.

[d0w0rkS0n]

if you have a gauge cluster that will fit my manual 94 st. ill take that 23322 is the zip

also a center console. what prices u lookin for?

[trex6g]

Make an offer on any of the parts you see in the pic. I also have doors and seats, I can take the seats apart and ship them but it is still pretty expensive, doors need to be picked up.



Thanks

how much for one of your cluster?do you have the door lock switches for both doors?

[massbrandon]

Leather seats? If no one is interested would you be willing to sell just the leather cover?

[ETNRIDER]

Leather seats? If no one is interested would you be willing to sell just the leather cover?

Cloth Seats, sorry for not listing them that way

[ETNRIDER]

Still have many parts.

Doors and seats still for sale too!!

[aspen]

How much for the door sills?

[ETNRIDER]

How much for the door sills?

Let me look at them tonight, I will take some pics and send them to you. I think one had some scratches on it but I don't know for sure.

Thanks

[audet2604]

do you have the arm rest cover and if you have it how much

[ETNRIDER]

do you have the arm rest cover and if you have it how much

Yes I do, I pmed you about it.

[hitcachi]

PM sent

[DEATH]

I'd like a price on drivers seat - cushions and foam only [Only if intact - no rips and grey/black style] and speedometer only shipped to 77040. PM me if you can.

[ETNRIDER]

I'd like a price on drivers seat - cushions and foam only [Only if intact - no rips and grey/black style] and speedometer only shipped to 77040. PM me if you can.

Pmed you!

[ETNRIDER]

Open to offers & Trades on all my stuff!

[richee3]

Are those JDM clear headlights for the brights? If they are, PM me a price.

[ETNRIDER]

Are those JDM clear headlights for the brights? If they are, PM me a price.

No those are just the standard lights with some clear lens from RAYME on this board. They look killer and are easy to do. Ask him how much he is selling them for now and get some, it will be a lot cheaper than the JDM ones and "most" people will never know.

Thanks

[richee3]

Alright, I'll definitely look him up Thanks!

My next question... Do you still have the tray that goes in the rear hatch?



This post has been edited by richee3: Aug 21, 2008 - 10:10 PM

[ETNRIDER]

Alright, I'll definitely look him up Thanks!

My next question... Do you still have the tray that goes in the rear hatch?

For sure look him up! Sorry the tray for the rear hatch has been sold.

Thanks

[slow_yota]

Interested in the pass side door.
Anyrust under the door ?
How much..And ya you'd have to ship it.
= South bend, 46637

[ETNRIDER]

Interested in the pass side door.
Anyrust under the door ?
How much..And ya you'd have to ship it.
= South bend, 46637

No rust at all in either door. I will check with UPS and see about shipping in the morning.

Anyone know how much a fully loaded door is?

[slow_yota]

if need be..id take both doors unloaded if you want to strip them

[audet2604]

do you have the arm rest cover and if you have it how much

Yes I do, I pmed you about it.

ok and how much with shipping in canada and plz give me a pics,tanks

[ETNRIDER]

New pics!

[ETNRIDER]

Bump

[celica7afe]

Make an offer on any of the parts you see in the pic. I also have doors and cloth seats, I can take the seats apart and ship them but it is still pretty expensive, doors need to be picked up.



Detail shots of the door panels, not in bad shape have a few marks on them..





Passenger side under panel...


Seats the drivers side is pictured has the factory TRD tear on it. Passenger side is near perfect.


Doors, both are complete minus mirrors and drivers side outer door handle.




AC / Heater blower


I WANT THIS STUFF GONE!!!! Please make offer on anything. I can drive a little ways to drop of doors or seats.

Thanks :thumbsup:how much for the back cover for the trunk.

[Skerj]

Are the door panels still available or have they been sold already?

[ETNRIDER]

Are the door panels still available or have they been sold already?

I still have a set of door panels available.

[ETNRIDER]

Bump for spring update!!!!

Doors, Seats, drivers pilar, rear hatch are all sold!!!

This post has been edited by ETNRIDER: Mar 9, 2010 - 10:38 AM

[ajmorris1977]

i see in the pic you have three guage clusters (dials, speedo or whatever you call them) what is the differance if any? closer pics? price? please.....

[ETNRIDER]

i see in the pic you have three guage clusters (dials, speedo or whatever you call them) what is the differance if any? closer pics? price? please.....

Yeah I have three gauge clusters and one has the white faced gauges on them. I will check and see what the mileage is on all of them. Not sure what year they are. Not sure if the is a difference in years or GT/ ST there may be thoguh, see if you can find out.

I will try to get some pics posted up tonight or Thursday at the latest.

This post has been edited by ETNRIDER: Mar 9, 2010 - 2:35 PM