Other Projects?, Post your photos of your other project cars.. Options

[Spitrod]

Anyone else have other projects going?
When I'm not working on the Celica, I'm working on an 89 Nissan Sentra Sport Coupe.
Picked her up for $500. She runs like new but needs some help in the power department.
I decided to work on the exterior first because I didn't like the way she looked in white.
Here's my progress so far -

How I bought her -


After a coat of black -


Present day -


My next steps are to build a decent hood scoop, do all the usuals to the engine,
upgrade the suspension (it sucks), get bigger wheels and wider tires and work
on the interior to get rid of the horrible "table cloth" looking design they used
on the seats, doors and various areas.

got any photos of your projects?

[95CelicaST]

I think it looked better in white.......


My current project.



I just ordered some new items for my "other" project, of which I will post late next week.

[Spitrod]

I've heard that...but I've personally never liked white on 99.9% of cars.
I like white Celicas if the trim is done right to create contrast.

The white was real rough, though. Lots of surface rust. Needed to be
painted anyway. It's a nice break from all the internal work I do to the
Celi.

You gettin' a wheelie bar for that thing?

This post has been edited by Spitrod: Sep 19, 2008 - 4:38 PM

[Akirad1]

those look real good with a two tone black on bottom red on top

[x_itchy_b_x]

3sgte engine swaps. celica's engine to the mr2, mr2's to the celica.
ones built ones not. i did every single bushing over in the mr2, SO tedious to press out every bushing and unbolt everything, i thing i replaced atleast 20 of em.

[DEATH]

I know you know what you're doing but are you sure that Turbo is gonna fit in the SW20?

[x_itchy_b_x]

well see. it might not, its gunna be close. i might need to make a new adapter with less of an angle on it.

[DEATH]

I've pulled more SW20 Turbos than I ever wanted to [Really only two but it's such a PITA compared to the Celica I didn't want to do the second one at all] and my eye is saying that thing is gonna be knocking on the firewall everytime you shift - but as you say we'll see.
Meh - cut out the firewall and loose the passenger seat so you can be closer to your Turbo

[presure2]

I've pulled more SW20 Turbos than I ever wanted to [Really only two but it's such a PITA compared to the Celica I didn't want to do the second one at all] and my eye is saying that thing is gonna be knocking on the firewall everytime you shift - but as you say we'll see.
Meh - cut out the firewall and loose the passenger seat so you can be closer to your Turbo

lmao..dont tempt him, as crazy as ze horniak is, he'd do it


...i double dog dare you john...

[x_itchy_b_x]

my friends and i already joked about that situation. boosting and sucking the interior of the car into the turbo lol.
if it comes down to it hitting the firewall by a little ill just bang it out with a hammer.

[Valo666]

Only projects i got on the go that I own, is my daily driven 2002 EP3 Civic..



Then ones I dont own, that im pretty much building/doing all the work on....

My buddies salvaged 2005 WRX STI..he bought it from an insurance company in Vegas...the guy put it into a ditch, wrecked the driveshafts, front bumper, headlights and a bit of frame damage...but he then took every thing he wanted out of it..so its missin speakers, radio, carpets all cutup, boost controller missin. So we are rebuilding and puttin some more power to it..so far we put an Apexi intake on, ordered up a HKS hi-power exhaust, HKS SSQV and we havent made up our mind on boost controller and water/methonal injection kit yet.
only pic i can find right now...


And im workin on my buddies 97 Integra RS. Its his first import/non-family car...so im helpin him with moddin it properly for cheap and gettin him into the import game. So far, all thats done is a strut bar, AEM short ram intake, dyed carpets, reupholstered headliner, momo evolution steering wheel, and black housing turn signals. Hes gettin an OEM style carbon fiber hood soon, then repainting the car black.




EDIT: the teg is actually purple...its funny cuz he drove a purple Intrepid b4 this, vowed he would never drive a purple car again, comes home and has a purple integra...lol

This post has been edited by Valo666: Sep 19, 2008 - 9:43 PM

[Spitrod]

That Teg is sweet. One of my in-laws has one. I never drove one until last
summer. They drive really similar to the Del Sol I had.

Nice cars.

[LewFX]

[1bwilson]

My 98 TJ

4" lift, Banks exhaust, Big brute intake, MT wheels and tires, 410 gears front and back. Basicly my DD with improvements as I find myself in situations where I kick myself for not having it.

[foxcraze]

This is actually my main project i bought the Celica as a get around car but will prob end up working it eventually lol Any way here is my truck 2007 Chevy Colorado LT

Before






After For now till i get home from Iraq and get the rest of my googies put on. I have a nex grille surround, fiberglass flush mount tonneau cover, full rear skin welding in with a license plate box where the tail gate area would be, takin off the handles, and got some 4x4 flares im gonna cut and modify to fit flush with the body kit.

[NgoFcukinWay]

Then:




Somewhat now:




The day we cranked it over for the first time:


The last set of pics were taken back around March. Other stuff have been done to it since.

[chucho]

Then:



The last set of pics were taken back around March. Other stuff have been done to it since.

Thats what I want. But in white

[D-Man]

LOL!! wholey crap Alex, i'm just scrolling thru looking at the pictures... When i see your supra, and i'm thinking "I know this car from somewhere... infact this house looks familiar..." I'm such a 'tard somedays... lol.

Looking good! When is that thing going to finaly be ready?

[Axel04]

My other Project.. 2001 Integra GSR






Hey look no Oil Leaks lol.. Spotless

[NgoFcukinWay]

Looking good! When is that thing going to finaly be ready?

When Chuck Norris visits and graces us with his presence and roundhouse kicks us all in the face, then points at my car and yell "PERFECTO!" which results in my car looking like it just rolled off the showroom floor back in '91 but with the 1JZ in place of the 7M.

Axel - That's a nice looking Teggy. I wouldn't mind owning one if it wasn't for the fact that they're a pretty hot item here in town.

[foxcraze]

Am I the only one who has a Truck as a Project Vehicle as well lol

[Axel04]

Looking good! When is that thing going to finaly be ready?

When Chuck Norris visits and graces us with his presence and roundhouse kicks us all in the face, then points at my car and yell "PERFECTO!" which results in my car looking like it just rolled off the showroom floor back in '91 but with the 1JZ in place of the 7M.

Axel - That's a nice looking Teggy. I wouldn't mind owning one if it wasn't for the fact that they're a pretty hot item here in town.

Thanks NgoFcukinWay. The last year of the Integra. I was lucky to get my hands on it.. It's hard to find one that's not ragged out and not a million miles on it. I try to keep it clean.

[NgoFcukinWay]

Thats what I want. But in white

There's a white one with a 1JZ here in town for sale for $4500 on craigslist. I wouldn't pay that much though considering who owned it before and how he mistreated the car.

[Axel04]

bump any body else have any other projects

[_Jim_]

This is My ST205 WRC project.

This is my 1995 Celica St with Gen2 3sgte swap with E153 in it. Current mods are 3" turbo back exhaust, ct20b, FCD, Water Injection, 16 PSI, Battery relocation, 3" Intake, dropped 1.5 inches all around, 17" rims. The hood and lip went onto my GF's car, (long story, look at supershannon77's build thread for all the details) It will now have the complete front end off my WRC clip


These are the pics of the clip




Tear down begins




I had more pics of the progress but, I messed that up some how......So I will work on getting more. My good friend Manny came down and Put all the new gaskets on, and put it all back together. The motor is now up at his place in mass getting put back in, then getting painted. The New mods list is GEN3 with E153 LSD tranny , FCD, 3" turbo back, possibly 4" intake (still debating), ct20b (obviously), ATS adjustable Cam gears, Water Injection and 21psi. 300+ wheel hp here we come.

[Fastbird]

93 Trans Am -- This is a LONG term project. Currently have a $14K 383 stroker on a stand in the garage, have a $1500 PT76GTS in my pantry, a $2K FAST XFI Computer, and a whole host of other parts. Have approximately $20K in parts laying around for it. Still waiting on the hot parts for the turbo, and some other misc, and it'll all go together. Looking for 800+ RWHP and single second timeslips when it's done, full weight pump gas car.


My own custom fuel rails:


99 Corvette -- THis was NOT supposed to be a project right now, but after some spirited driving about 2 weeks ago now and a little bit of inattention on my part, I kissed the rev limiter pretty hard and after correcting that action proceeded to rip the camshaft gear out of the camshaft. Resulting damages included custom valve reliefs on every piston, custom bent pushrods, and custom vent valves. Had a set of ported heads and a Lingenfelter Turbo Camshaft on standby, but still have to cough up the dough for a Forged LS3 shortblock (377 CID, 4.070 bore 3.622 stroke, GREAT bore to stroke ratio), fuel system, misc stuff, and installation since I'm paying a buddy to do it as this happened 350 miles from home.


Piston Damage on the worst cylinder:

Worst bent valve:

Worst Pushrod (Not Me)

Missing cam gear and bolts:


Nice part?? This one should be completely streetable and lay down in the 700-750 RWHP range without batting an eye with the twin turbo's. Downside is that it's costing me $8K right now, which I really don't have but refuse to let this one sit on jackstands like the Trans Am.

[_Jim_]

Nice cars, those are some SERIOUS big boy toys. Its not to often that you hear 700hp, and very street able in the same sentence....gotta love v8's. Its builds like this that make me miss my camaro, best of luck with your builds.....looking good so far.

[GriffGirl]

When I think to myself, "Self? 700 bhp," I feel kind of funny inside and I get butterflies. Hell, even 150 bhp makes me feel kinda wistful...

[3WayStunna]

THis is my s14 that ive been working on for about a full year now. Picked it up from a great friend of mine (actually a great douchebag) who literally let this car sit in a parking for about 3 years. Umm, about the pics, this is all i have, considering i am bad at remembering to take pics of the progres as i went along, and what all i have are some cell phone camera pics of the engine going in, and after install.

Anywho, after buying the car, i knew it needed some work done such as the engine wiring needed to be re-wired, replacement of suspension componets and all. There was a list i wrote up, but all in all it was a good car. My plans for it, are pretty simple. Just a nice street machine that puts down decent power, and can hold its own for the local auto-x in town, and maybe some track days. The engine is an sr20 blacktop, and the only work ive been able to get done on it, is the engine swap itself, wiring the ECU to the car, and replace the springs/struts with tein dampners, and replace some worn bushings. Future progress involves rust-proofing the underbody, getting the car started, adn finishing up the suspension work i have to do...

I wanted it all done by end of this summer, but right now, im still stationed over in korea, AND, i am PCS'n over back to okinawa end of this year, so this poor car is sitting in storage...oh wells..








This post has been edited by 3WayStunna: Oct 5, 2008 - 6:55 AM

[3WayStunna]

93 Trans Am -- This is a LONG term project. Currently have a $14K 383 stroker on a stand in the garage, have a $1500 PT76GTS in my pantry, a $2K FAST XFI Computer, and a whole host of other parts. Have approximately $20K in parts laying around for it. Still waiting on the hot parts for the turbo, and some other misc, and it'll all go together. Looking for 800+ RWHP and single second timeslips when it's done, full weight pump gas car.

99 Corvette -- THis was NOT supposed to be a project right now, but after some spirited driving about 2 weeks ago now and a little bit of inattention on my part, I kissed the rev limiter pretty hard and after correcting that action proceeded to rip the camshaft gear out of the camshaft. Resulting damages included custom valve reliefs on every piston, custom bent pushrods, and custom vent valves. Had a set of ported heads and a Lingenfelter Turbo Camshaft on standby, but still have to cough up the dough for a Forged LS3 shortblock (377 CID, 4.070 bore 3.622 stroke, GREAT bore to stroke ratio), fuel system, misc stuff, and installation since I'm paying a buddy to do it as this happened 350 miles from home.


Nice part?? This one should be completely streetable and lay down in the 700-750 RWHP range without batting an eye with the twin turbo's. Downside is that it's costing me $8K right now, which I really don't have but refuse to let this one sit on jackstands like the Trans Am.

Hey thats a good looking car there man. Good luck with the work you have to do on it bro...

[razor7]

1997 GSXR 750






Now I have full leather pants with pads, a new red leather jacket, and riding boots. Much safer then my last set up with jeans and skate shoes.

0-60 in 3.2 6th gear maxed should get me to 180mph, but I haven't tried, just hit 147 and stopped... too young to die.

-TC

This post has been edited by razor7: Oct 6, 2008 - 11:03 PM

[devilsden97]

because 147 on roads are safe.

[_Jim_]

^ I saw no mention of doing this on a road. All he said is that he HAS gotten it up to 147. Could be on a track, could be on the salt flats for all we know. Nice bike man.

[razor7]

^ I saw no mention of doing this on a road. All he said is that he HAS gotten it up to 147. Could be on a track, could be on the salt flats for all we know. Nice bike man.

Thanks guys. She's my pride and joy. Crappy part is tuning the carbs to match the exhaust, I still can't get them dialed in correctly :-/

-TC

[95CelicaST]

My inexpensive project:

Gets me back and forth to work (the whopping 2 mile round trip commute). I don't even start the WRX up anymore during the week. Saves me tons of money on gas (fill up once a month!!) and thus - I save more money to put back into it.

2009 Windsor Hour




This post has been edited by 95CelicaST: Oct 9, 2008 - 1:19 PM

[Smaay]

[Coomer]

Nice bike Matt...I wanna get a fixie myself sometime soon.

Here's my current project:



Currently it's motorless, awaiting a H2B swap which is in the works.

[95CelicaST]

I love the simplicity of a fixie over a geared bike. No cables, no brakes, nothing.


Nice wheels When do I get to see it? Is it here, or across the mountains?

[x_itchy_b_x]

Almost there!

[Axel04]

I would like to keep this alive!! Anyone else?

[bloodMoney]

Here are mine...

1990 Alltrac




2003 GSXR 600 (just enough to get the job done)

[SPID33]

heres mine..................

[Rymaster]

1993 GSXR600 i picked up to fool around with as a winter project










as she sits now.... stripped for paint and mods(jet kit...pods..advanced ignition rotor...)

[playr158]

As she sits now



Previously:
16mm rear spacers, 5mm front, 18 x 7.5 wheels, Witec 60mm cupkit, TurboXS MBC, downpipe only, VDO boost gauge
GTI front conversion


Toy projects that I sold: both had sprockets, chains, ect.




This post has been edited by playr158: Nov 19, 2009 - 8:53 AM

[viruz_one]

Here's My other car which is going under its car cover for the winter

When I bought her






And hopefully have her looking something like this, in silver with a different grill.

[SwissFerdi]

Why'd you reverse the conversion, that was sweet! Back to a stock DD I'm assuming?

They're not bad cars though...my brother still has his, which was his first car, from 2003...brand new, and now it looks like sh!t. I think he's washed it maybe five times in his life.

[GriffGirl]

'79 Twinstar. Basically, a fast scooter but it's my first bike, and it's a perfect size for me. I just have this thing for cruiser bikes, always have. Planning on a frame-off restoration, will replace the tank and seat with the original, and anything and everything that's plastic or rubber, as it hasn't even been registered since well before a lot of you were even born lol

As it is now (taken when I bought it - note the super-sweet bungee cord holding the seat down )


The goal:


This post has been edited by GriffGirl: Nov 20, 2009 - 10:28 AM

[SlvrCelica09]

'79 Twinstar. Basically, a fast scooter but it's my first bike, and it's a perfect size for me. I just have this thing for cruiser bikes, always have. Planning on a frame-off restoration, will replace the tank and seat with the original, and anything and everything that's plastic or rubber, as it hasn't even been registered since well before a lot of you were even born lol

As it is now (taken when I bought it - note the super-sweet bungee cord holding the seat down )


The goal:

lol should be fun.. cant wait to see the final results

[SwissFerdi]

'79 Twinstar. Basically, a fast scooter but it's my first bike, and it's a perfect size for me. I just have this thing for cruiser bikes, always have. Planning on a frame-off restoration, will replace the tank and seat with the original, and anything and everything that's plastic or rubber, as it hasn't even been registered since well before a lot of you were even born lol

As it is now (taken when I bought it - note the super-sweet bungee cord holding the seat down )


The goal:

Flat black the hell out of that bike.

[mmmchocolate]

i dont think your sound system is big enough or loud enough.

[cheela]

heres my RA24. just picked it up this past thanksgiving. love at first sight!!!



there's my celi in the background


gonna cover that soon.


almost naked.

[Axel04]

^ Nice car man good to see older Celica staying alive