6G Celicas Forums

Welcome Guest ( Log In | Register )

> Uneven Brake Wear, Searched first, couldnt find much..
post Jan 4, 2009 - 6:14 PM
+Quote Post
agentzero0

Enthusiast

Joined Dec 3, '08
From Pekin,IL
Currently Offline

Reputation: 1 (100%)




So Today i was swapping to steelies on my 94 Celica I purchased from a fella on this forum.

Anyways, I noticed that my drivers side brake rotor looked putrid, so i looked at the pads and they are almost metal to metal.
Which is lame because I replaced them not even 3 months ago...

I check the other side and its perfectly normal even wear...

What gives?
 
Start new topic
Replies (1 - 10)
post Jan 4, 2009 - 6:24 PM
+Quote Post
njccmd2002



Enthusiast
*****
Joined Mar 15, '07
From Tennessee
Currently Offline

Reputation: 52 (100%)




ouch,

master cylinder

air in the passenger system and thus not braking, bad caliper on the right.

in luck that the only whee braking you is the one that is messed up.

have it checked. or if you DIY i would start by having somebody press the brake while you check the passenger caliper for movement.


--------------------
Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL

If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in

2grfe Swapped... Why I chose the 2GR, before you ask read here...

A great civilization is not conquered from without until it has destroyed itself from within.


@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
post Jan 4, 2009 - 6:28 PM
+Quote Post
pipes

Enthusiast
***
Joined Apr 23, '08
From boston MA
Currently Offline

Reputation: 5 (100%)




Check your slide pins...also something that does it a bad wheel bearing would cause uneven pad wear on onside of the rotor
post Jan 4, 2009 - 6:45 PM
+Quote Post
agentzero0

Enthusiast

Joined Dec 3, '08
From Pekin,IL
Currently Offline

Reputation: 1 (100%)




Funny you mention the wheel bearing because I have a good feeling the front wheel bearing on both sides arent good because it makes that noise of almost like a oval shaped tire or something.

It also trashed my 2 front tires even though I just got the damn thing aligned not even a month ago.

post Jan 7, 2009 - 5:58 AM
+Quote Post
Hanyo

Enthusiast
*****
Joined Aug 16, '03
From Bay area
Currently Offline

Reputation: 0 (0%)




sounds like your passenger side brake caliper is frozen.

post Jan 7, 2009 - 11:53 AM
+Quote Post
jimmykay

Enthusiast
***
Joined Jul 14, '08
From St. Louis
Currently Offline

Reputation: 2 (100%)




I'd check the calipers first. pull the passenger side caliper off and see if you can collapse it with a c-clamp.

The wheel bearings could be bad, but I doubt that it would be causing the brake wear.


--------------------
'99 Celica GT - Sold
'11 Mazdaspeed3
post Jan 7, 2009 - 12:16 PM
+Quote Post
pipes

Enthusiast
***
Joined Apr 23, '08
From boston MA
Currently Offline

Reputation: 5 (100%)




QUOTE (jimmykay @ Jan 7, 2009 - 12:53 PM) *
I'd check the calipers first. pull the passenger side caliper off and see if you can collapse it with a c-clamp.

The wheel bearings could be bad, but I doubt that it would be causing the brake wear.


You would be surprised what a bad wheel bearing would do
post Jan 7, 2009 - 12:23 PM
+Quote Post
LewFX



Enthusiast
*****
Joined Jan 28, '05
From Redondo Beach, CA
Currently Offline

Reputation: 86 (100%)




id agree, a wheel bearing would probably go before a caliper

This post has been edited by LewFX: Jan 7, 2009 - 12:24 PM


--------------------
IPB Image
post Jan 7, 2009 - 1:59 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




What's up, agentzero0? Glad to hear you're getting those wheels and tires on!

My stepmom's old Exploder went through bearings like nobody's business. It always made like a roaring or growling when she was going down the highway, and because the bearings were always going bad, she constantly had to replace her tires too. I'd definitely get your bearings checked out. Also, to check and see if the caliper is frozen, jack the front end of the car up. Spin one wheel by hand, then go spin the other. If one is a LOT harder to spin, then it could very well be a frozen caliper.


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post May 20, 2010 - 3:18 PM
+Quote Post
youseman

Enthusiast
*
Joined Sep 23, '09
From Dartford Kent
Currently Offline

Reputation: 0 (0%)




i reckon its simpler than that. if you've not had the car long and the previous owner had it down to metal on metal before, it scars the disc, its like rubbing your pads up a grinding wheels, eats them away like ****. i know from experience frown.gif
post May 20, 2010 - 5:22 PM
+Quote Post
GriffGirl



Enthusiast
*****
Joined Feb 7, '07
From Portland, Oregon
Currently Offline

Reputation: 67 (96%)




^ this thread is over a year old. tongue.gif


--------------------

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: August 29th, 2025 - 7:42 AM