Mar 13, 2009 - 8:14 PM
|
|
|
Enthusiast Joined May 11, '08 From culpeper, VA Currently Offline Reputation: 0 (0%) |
I have a haynes manual but it is sketchy on just how to change the clutch in my 95 gt. If there is somewhere i can go to get detailed instructions from start to finish on how to change this i would be thankful. I have done many repairs myself over the years and any heads up i can get would be great!!!
This post has been edited by mahem109: Mar 13, 2009 - 8:47 PM |
![]() |
Mar 13, 2009 - 8:25 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 17, '08 From JB MDL, NJ Currently Offline Reputation: 30 (100%) |
Changin what?
|
Mar 13, 2009 - 8:42 PM
|
|
|
Enthusiast Joined May 11, '08 From culpeper, VA Currently Offline Reputation: 0 (0%) |
|
Mar 13, 2009 - 9:14 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Feb 16, '07 From BP, MN Currently Offline Reputation: 7 (100%) |
-------------------- ![]() |
Mar 13, 2009 - 9:30 PM
|
|
|
Enthusiast Joined May 11, '08 From culpeper, VA Currently Offline Reputation: 0 (0%) |
again, that is really sketchy, doesn't really cover all that is needed to do to remove the trany. How do you remove your axles? etc. I am looking for a little more in depth than a remove everything out of the way and unbolt the transmission. what am i going to run into along the way? What are the hard parts like seperating the trans from the block, does this just fall off the block or am i going to have to pry it apart, if so what is the best area to pry from. I am looking for the tricks of the trade. Im sure there are some tricks that i am not seeing or hearing about. |
Mar 13, 2009 - 10:15 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Feb 16, '07 From BP, MN Currently Offline Reputation: 7 (100%) |
Haven't done one, but it's held on by bolts and it will drop making a hole to china. You're gonna need a good lift to hold and lower the transmission down.
This post has been edited by ZGear: Mar 13, 2009 - 10:16 PM -------------------- ![]() |
![]() ![]() |
| Lo-Fi Version | Time is now: January 11th, 2026 - 6:38 PM |