FS: Tons of stuff, toyota stuff and misc. Options

[soulshadow]

Re-edited now, parting out everything. Just ask.
95' Toyota Celica ST shell. M/T Hatchback. (part out)


Tons of parts everything still intact just taken apart.











These are a little older and its a little more faded now and dirty.




----------------------------

[A] series engine M/T swap, Includes bracket, pedal, shiftlinkage, reserivor & pump, lines to Slave cylinder, shifter and base + spring.
Complete for your Auto to M/T swap for a 7A or 4A engines $125 shipped. Off a '95 ST


Brake booster reservoir and pump $75 shipped


Front Motor Mount and Rear $30 shipped


Drivers side and Passengers (SOLD)
$50

Spoiler 2-Post red $80 shipped SOLD



Ignition lock, cylinder + keys, Full adjustable steering column
$80 shipped.


Drivers airbag or Passengers airbag
SOLD

KYB-GR2 shocks w/ Dropzone springs 2.0" F and 1.8" R (cartridge inserts for front and Actual for rear) Less than 10K miles, just been sitting for a long time on jackstands [Sold as set]

$200 shipped.

Fuel Door SOLD
$25 shipped

Side folding mirrors not powered
$30 shipped or both sides for $50 shipped

Wiper Motor

$35 shipped

Misc interior pieces here and there

$20-100 depending on size and shipping.

Low Beams SOLD

High beams SOLD


Blower motor unit

$50 shipped

AC cabin unit

$55 shipped

Heater Core and full assembly $60 shipped Up for grabs again


If you guys wanted the parts and don't contact me after a week of reserving i'm putting it up for grabs again. Thanks.

This post has been edited by soulshadow: Aug 21, 2009 - 11:20 AM

[cyb593]

does it happen to be a red hatchback with a 2 post spoiler? Might be interested in the spoiler if a 2 post and red.

[CelicaST_CALI]

fenders?pass door?

[soulshadow]

does it happen to be a red hatchback with a 2 post spoiler? Might be interested in the spoiler if a 2 post and red.

LoL its red and is a 2 post hatchback.

fenders?pass door?

If you want to pick it up or arrange shipping

[jacOOLito]

Damn, I want that passenger fender. How do you think will shipping be to San Diego, CA 92114?

[LewFX]

mid pipe to cat?

[spy00005]

does the 95 have the stock fogs?

[playr158]

front control arms

[cyb593]

how much for the spoiler shipped to 30341 atlanta ga?? let me know and we will negotiate.

[chode]

i would need a passenger side fender
and the power antenna (antenna + motor) if it work well
maybe the inside of the doors (both) if they are premium and in great shape

shipped to quebec,canada

This post has been edited by chode: Jul 14, 2009 - 10:52 PM

[soulshadow]

My cat is custom 2.5 piping so I can't take it apart.

Sorry no fog lights

I'll try posting pictures this Sunday, I'm studying for finals this week so I have no time to do much.

This post has been edited by soulshadow: Jul 15, 2009 - 12:18 PM

[GriffGirl]

My cat is custom 2.5 piping so I can't take it apart.

Sorry no fog lights

I'll try posting pictures this Sunday, I'm studying for finals this week so I have no time to do much.

Would you cut up the exhaust to ship? I'd be interested in it.

[jmeyer]

If you'll do 150 for the wideband I'll take it

[soulshadow]

If you'll do 150 for the wideband I'll take it

I've already spent $240 on this to get it to my door and I haven't even used it yet other than plugging it to a powersupply to make sure it works.
Complete Kit. Minus O2 bung.

My cat is custom 2.5 piping so I can't take it apart.

Sorry no fog lights

I'll try posting pictures this Sunday, I'm studying for finals this week so I have no time to do much.

Would you cut up the exhaust to ship? I'd be interested in it.

Hmm If you want the piping and everything from the Cat down to muffler I say $50, shipping on the other hand is going to be a killer.

[jmeyer]

So is that a no?

[soulshadow]

So is that a no?

sorry, its a no

[BonzaiCelica]

how much to cut out the right side passenger quarter panel. and shipping, or would that not be worth it cause of shipping

[Seven1Six]

Same as Bonzai, but drivers side, and shipping to 14150?

[soulshadow]

how much to cut out the right side passenger quarter panel. and shipping, or would that not be worth it cause of shipping

Shipping is going to be the most expensive but how big do u need it? I would need a diagram or something.

[Seven1Six]

That but on the drivers side

[BonzaiCelica]

hmmm well this is wat happend when you go to fast around corner without proper suspension and tires.



i got that repaired and then like 3 months later i back up into a little pole and left a small dent. It was too dark and backed up before i was thinking.

i plan on repainting and having the right quarter panel welded on. Becuase i want that little flat edge that goes all around the tire, that came with the car before i crashed it. but im afraid that when they weld on a cut out quarter panel it will not look as good as the original. It shoudl look just fine right.

I just want to get an idea for shipping, so if the day comes and i cant find a 6gc in a junkyard near my house, I can go to a fellow 6gc member for help.

[soulshadow]

Shipping I can only guess that it will be around $50-100 since its such a wide piece and you have to package it somehow unless you want it flat like sheet metal when it gets to your door. BTW just bondo yours its not even that bad.

[lucky490]

do you have the after market struts and springs? pming

[Drew-887]

How much do you want for the celica turn signals?

[soulshadow]

BUMP

[solidxsnake]

Take it that M/T Swap doesn't include the manual transmission?

[soulshadow]

Take it that M/T Swap doesn't include the manual transmission?

All the stuff you need minus, the tran. and the slave cylinder to the tran.

[soulshadow]

Bump need to get rid of more stuff.

[mgnt232]

Re-edited now, parting out everything. Just ask.
95' Toyota Celica ST shell. M/T Hatchback. (part out)


Tons of parts everything still intact just taken apart.











These are a little older and its a little more faded now and dirty.




----------------------------

[A] series engine M/T swap, Includes bracket, pedal, shiftlinkage, reserivor & pump, lines to Slave cylinder, shifter and base + spring.
Complete for your Auto to M/T swap for a 7A or 4A engines $150 shipped. Off a '95 ST


Brake booster reservoir and pump $100 shipped


Front Motor Mount and Rear $40 shipped


Drivers side and Passengers (SOLD)
$50

Spoiler 2-Post red $80 shipped

Reserved for Cyb593

Ignition lock, cylinder + keys, Full adjustable steering column
$100 shipped.


Drivers airbag or Passengers airbag


$35 for either one shipped or $60 shipped for both. (Passengers come with that covering on top tat looks like it might fling out and hit you if it ever deploys)
Passengers airbag SOLD

KYB-GR2 shocks w/ Dropzone springs 2.0" F and 1.8" R (cartridge inserts for front and Actual for rear) Less than 10K miles, just been sitting for a long time on jackstands [Sold as set]

$250 shipped.

Fuel Door?

$25 shipped

Side folding mirrors
$35 shipped or both sides for $60

Wiper Motor

$40 shipped

Misc interior pieces here and there

$20-100 depending on size and shipping.

Low Beams?

$50 for both shipped still good comes with that hard to find rubber piece

High beams I think

1 had water stuck inside so its free with the other one (It's the drivers high beam)
$35 shipped

Blower motor unit

$75 shipped

AC cabin unit

$75 shipped

Heater Core and full assembly $90 shipped SOLD


More parts to come.

Hi do you have the 7A-FE engine? I have a 1994 celica ST 1.8L (7A-FE) and wondering if it will fit if you have it. Also do you know if the gas tank for these are the same, and if yours is in good condition? thanks for any help you can give me

[jacOOLito]

Are you selling the passenger fender?

[soulshadow]

Fenders and stuff are for sale, if your willing to pay for shipping which is expensive and motor wise I have nothing left for it. 94-95 ST models are identical so the gas tank would fit but the shipping is expensive.

[spy00005]

how much for front bumper? looks like its in decent condition?

[Random_Stranger]

Need a price for LH brackets for head lights, any pieces will do, any LH bracket from frame of the car and goes up to the upper tie bar as well.

Also looking for radio trim bezel, sunroof motor with the switch (if it has that), and um.... any parts that secure the inner part of the hatch to the frame of the car.

PM me or text me a price range (Faust 661-343-7677), please list individually as I have listed, no more no less unless you want to.

[vi-tuyen]

still have door panels? I need both.

[Celiquick]

PM'd.

[Asdbearc]

Hi

i want all 4 headlights. let me know the condition of the tap and housing

also i want the airbag module and two sensor

can you give me a price shipped to 11101

thanks

pmed

[blackcity]

How do I pay for the High beams light cause I want them

[solidxsnake]

Is the fuel door + hinge + spring in good condition? Mine is busted and I need a new one.

[TiGZ461]

Alot of stuff pending to me, check your email I want two more things, and I'm set.

I'm InspiredCb7@aim.com

[Nartanian]

Interested in steering wheel airbag if still available.

[TiGZ461]

That's pending well basically mine, just waiting for the my money to get to him now

[Nartanian]

Ug! That's ok then.

[TiGZ461]

lol haha, sorry man had to hope on it quick, i knew you would come.

[screamingchicken]

still got the drivers airbag? What about the front bumper (the metal one behind the plastic one)?

[jordisonjr]

Do you happen to have the front ABS sensors?

[AMCMoe]

I'm looking for 6 of these clips that go between the front bumper and the black plastic panels under the car.
Do you still have them?

[soulshadow]

My car didn't have ABS so I don't have the sensor for it

I thew away all my retainer clips so I don't have any of those anymore

I DO have that metal thing behind the front bumper, if your talking about the speed safety metal bar that hides in between the front bumper.
$30 plus shipping

[screamingchicken]

http://i34.photobucket.com/albums/d138/mus...73/supports.jpg

I'm looking for the bar that goes where the yellow line is, the bumper support to be exact. Also, if you could cut off the rad support and headlight support (black arrows), you'd be helping me out big time. And the drivers airbag?

also, I need the supports that the metal bumper bolts onto, really need the passenger side but I'll take the driver's too.

This post has been edited by screamingchicken: Aug 9, 2009 - 6:24 PM

[Joe_1985]

pm'ed

[TiGZ461]

.

This post has been edited by TiGZ461: Aug 14, 2009 - 9:58 AM

[foilman]

Re-edited now, parting out everything. Just ask.
95' Toyota Celica ST shell. M/T Hatchback. (part out)


Tons of parts everything still intact just taken apart.











These are a little older and its a little more faded now and dirty.




----------------------------

[A] series engine M/T swap, Includes bracket, pedal, shiftlinkage, reserivor & pump, lines to Slave cylinder, shifter and base + spring.
Complete for your Auto to M/T swap for a 7A or 4A engines $150 shipped. Off a '95 ST


Brake booster reservoir and pump $100 shipped


Front Motor Mount and Rear $40 shipped


Drivers side and Passengers (SOLD)
$50

Spoiler 2-Post red $80 shipped



Ignition lock, cylinder + keys, Full adjustable steering column
$100 shipped.


Drivers airbag or Passengers airbag


$35 for either one shipped or $60 shipped for both. (Passengers come with that covering on top tat looks like it might fling out and hit you if it ever deploys)
Passengers airbag SOLD

KYB-GR2 shocks w/ Dropzone springs 2.0" F and 1.8" R (cartridge inserts for front and Actual for rear) Less than 10K miles, just been sitting for a long time on jackstands [Sold as set]

$250 shipped.

Fuel Door?

$25 shipped

Side folding mirrors not powered
$35 shipped or both sides for $60

Wiper Motor

$40 shipped

Misc interior pieces here and there

$20-100 depending on size and shipping.

Low Beams?

$50 for both shipped still good comes with that hard to find rubber piece

High beams I think

1 had water stuck inside so its free with the other one (It's the drivers high beam)
$35 shipped

Blower motor unit

$75 shipped

AC cabin unit

$75 shipped

Heater Core and full assembly $90 shipped Up for grabs again


If you guys wanted the parts and don't contact me after a week of reserving i'm putting it up for grabs again. Thanks.

[Agent21]

Both low beams. Where do I send money? Also wondering about bumper and fender shipping to 28217.

[shegarhuney]

looking for this part circled in GREEN.. both sides..

the picture's front strut just so you know..

[soulshadow]

All the shocks and struts complete kit now $200 shipped.

Reduced a lot of the prices. Everything must go.





This post has been edited by soulshadow: Aug 21, 2009 - 11:21 AM

[K-ESD]

PM'ed

[Akimbo]

wheels?

[02bluerolla]

how much for the wiring on the driver sides. ( the one with big box)

Also do you have the engine harness?

[njccmd2002]

how much for center console with armrest

[jefoyz888]

how much for the dashboard and the panels??

can you ship to Philippines?


heres my email add: jefoyz888@yahoo.com

[Marc6818]

how much for the door panels? shipped

E-mail - Marc6818@yahoo.com

This post has been edited by Marc6818: Aug 31, 2009 - 1:07 AM

[kCed]

Hey Bud,

I needed the drivers side window motor/track assembly..

How much for and and shipping to R2P0E2 winnipeg manitoba canada?

[oceanbratt]

hello,I am new to this site, anyway I am looking for a passenger side mirror and the sunvisors for my daughters car. If you have them can you please tell me what you want for them? thank you ,cheri

[jcengland]

hi, i need the small oval leather leather piece on the door card for both sides, how much for them including to post to london money waiting cheers joe

[crwarrior]

hey a control bar for sale? passanger side please? pm with price shipped to 33133

[soulshadow]

Sorry guys been so busy with school I hardly even have time to use the toilet.
Just shoot me a PM if you need parts.

[TiGZ461]

I need the two brackets that keep the safety bar in place. I also need the passenger side headlight support? I think thats what its called, the piece that keeps it in place. LMK if you have this.

[soulshadow]

Bump!!! I need everything gone now. Selling everything for dirt dirt cheap, just pay for the shipping and handling charges of what ever your want to buy. Get it now or I'm sending it off to the junk yard as it is and say good bye to some hard to find stuff. I really need the space!!

Some stuff worth considering or if your willing to pay for the shipping and arrange it yourself for the things OVERSIZED.

-Hatch back trunk with glass red. (oversized)
-fenders(oversized)
-Front and center air bag sensors.
-ST Calipers
-Sway bars
-Bumpers(oversized)
-Wiper motor
-Doors (oversided)
-Side mirrors
-window regulators, Power window switches
-Center console
-Trims
-Shifter linkage, Clutch pedal assembley for ST
-Heater Core
-More MISC

PLEASE SEND PM I do NOT check this thread.

This post has been edited by soulshadow: Apr 11, 2010 - 8:27 PM

[soulshadow]

Bump!!! I need everything gone now. Selling everything for dirt dirt cheap, just pay for the shipping and handling charges of what ever your want to buy. Get it now or I'm sending it off to the junk yard as it is and say good bye to some hard to find stuff. I really need the space!!

Some stuff worth considering or if your willing to pay for the shipping and arrange it yourself for the things OVERSIZED.

-Hatch back trunk with glass red. (oversized)
-fenders(oversized)
-Front and center air bag sensors.
-ST Calipers
-Sway bars
-Bumpers(oversized)
-Wiper motor
-Doors (oversided)
-Side mirrors
-window regulators, Power window switches
-Center console
-Trims
-Shifter linkage, Clutch pedal assembley for ST
-Heater Core
-More MISC

PLEASE SEND PM I do NOT check this thread.

Getting Very close to Junk day for this car. Next week it will be crushed so, nows your last chance for cheapo parts. Wiper Motors anyone? Heck I might just E-bay off the stuff if no one wants it.

[windowlicker]

how much would you want for the shifter stuff and what would all be included? i'm getting ready to do a auto to manual trans swap.

This post has been edited by windowlicker: Apr 20, 2010 - 10:40 PM

[K-ESD]

scratch that, I just checked my PM

This post has been edited by K-ESD: Apr 21, 2010 - 6:15 AM

[levicombs16]

Re-edited now, parting out everything. Just ask.
95' Toyota Celica ST shell. M/T Hatchback. (part out)


Tons of parts everything still intact just taken apart.











These are a little older and its a little more faded now and dirty.




----------------------------

[A] series engine M/T swap, Includes bracket, pedal, shiftlinkage, reserivor & pump, lines to Slave cylinder, shifter and base + spring.
Complete for your Auto to M/T swap for a 7A or 4A engines $125 shipped. Off a '95 ST


Brake booster reservoir and pump $75 shipped


Front Motor Mount and Rear $30 shipped


Drivers side and Passengers (SOLD)
$50

Spoiler 2-Post red $80 shipped SOLD



Ignition lock, cylinder + keys, Full adjustable steering column
$80 shipped.


Drivers airbag or Passengers airbag
SOLD

KYB-GR2 shocks w/ Dropzone springs 2.0" F and 1.8" R (cartridge inserts for front and Actual for rear) Less than 10K miles, just been sitting for a long time on jackstands [Sold as set]

$200 shipped.

Fuel Door SOLD
$25 shipped

Side folding mirrors not powered
$30 shipped or both sides for $50 shipped

Wiper Motor

$35 shipped

Misc interior pieces here and there

$20-100 depending on size and shipping.

Low Beams SOLD

High beams SOLD


Blower motor unit

$50 shipped

AC cabin unit

$55 shipped

Heater Core and full assembly $60 shipped Up for grabs again


If you guys wanted the parts and don't contact me after a week of reserving i'm putting it up for grabs again. Thanks.

you wanna sell me the stock bumbers

[conus00]

Do you still have the passenger's fender? If you do how much shipped to 43017?
Thanks!

This post has been edited by conus00: May 7, 2010 - 2:19 AM

[sunwukongg]

[A] series engine M/T swap, Includes bracket, pedal, shiftlinkage, reserivor & pump, lines to Slave cylinder, shifter and base + spring.
Complete for your Auto to M/T swap for a 7A or 4A engines $125 shipped. Off a '95 ST

would the shift links, and everything besides shifter and base that you have posted in this picture work for the 5sfe celica gt? cause i want to do an auto to manual swap and i already have the shifter and base. such as the bracket, pedal, shiftlinkage, reserivor & pump, lines to Slave cylinder?

This post has been edited by sunwukongg: May 12, 2010 - 9:54 PM

[Jeremie]

I need the whole suspension set. Email me @ jeremiescar@hotmail.com

[blackscarlet]

Not sure what you have left but...

How much for both interior door panels (if clean)
Center console (just the padded lid)
Power antenna assembly (if works properly)
Rear seats ( are they tan? i need black or something dark)

Live in Kop right outside of Philly

Thanks
adeal533@gmail.com

[soulshadow]

PLEASE SEND ME PM's on PARTS!