Japanese Nostalgia!, 1st gen Celica Options

[njccmd2002]

Been having a crazy idea, bout getting one, and restore, not to original but to my taste. However been googling around and celicatech has no info that is worthy, a lot of lame forums if i keep googling.

Anybody here that can guide me. I dont have the car yet, but want to find out about completed engine swaps. LOL

RWD, means 3sge altezza 6 speed. or similar. anyone with ideas?

This post has been edited by njccmd2002: Sep 4, 2009 - 8:56 PM

[njccmd2002]

so far this has been the closest.

and this car is sweet

http://www.japanesenostalgiccar.com/forum/...opic.php?t=4169

[808celica]

join the family

http://forum.jdmstyletuning.com/showthread.php?t=1985

http://1stgencelica.com/forum

[MaskedMan]

It's a good car, you just need patience with it. Information and parts for it are not easy to come by at all. 1stgencelica is your best bet though for any kind of help. Engine swaps are fairly common with the first gen Celicas. 7mge/gte, 1jz, 2jz, f20, sr20, 1uzfe are all nice choices. Personally, I'm sticking with my 20r motor and putting together a dual side draft system for it. That along with a header should open the engine up real nice. Then I would use an AE86 LSD rear end and a custom coilover set up and it will be legit . If you do get one, make sure to find one with a clean straight body, and good interior.

[808celica]

oh yeah derrick, your RA is in waaay better condition than mines because of your environment Hahahaha so YOU SUCK!

[MaskedMan]

oh yeah derrick, your RA is in waaay better condition than mines because of your environment Hahahaha so YOU SUCK!

Haha hey man, I have some peeling clear coat and some dirt on the car haha. I'm going to be doing the body work soon on it. I'm not fond of the side molding and the car didn't come with side mirrors, so there are holes in my doors where they should be. I'm going to fill that all up in the next few weeks (to keep my car rust free ), and I'll probably shave the antenna too.

Find me some banana tail lights!

[808celica]

HAhah i cant find those. i did how ever find some really nice fender mirrors I need to find another shell to cut up. I might have to order another 32/36 Weber Carb from Redline.

so far this has been the closest.

and this car is sweet

http://www.japanesenostalgiccar.com/forum/...opic.php?t=4169

lolz you have to know people to find the good sites. Lucky you got me and Derrick and that guy from Australia that has 3

Also AE86 suspension parts can be used..........i have yet to confirm because all the hachis i drove were too balla' to part.

i had a 1jz block that i wanted to build up but i gave it away. i might do a 22re or a 3tc

[MaskedMan]

HAhah i cant find those. i did how ever find some really nice fender mirrors I need to find another shell to cut up. I might have to order another 32/36 Weber Carb from Redline.

so far this has been the closest.

and this car is sweet

http://www.japanesenostalgiccar.com/forum/...opic.php?t=4169

lolz you have to know people to find the good sites. Lucky you got me and Derrick and that guy from Australia that has 3

Also AE86 suspension parts can be used..........i have yet to confirm because all the hachis i drove were too balla' to part.

i had a 1jz block that i wanted to build up but i gave it away. i might do a 22re or a 3tc

For the front suspension, AE86 parts work. I'm going to be doing the shortened AE86 front casings/spindles, with the AW11 AGX rear inserts, and ground control coilovers at 8kg. For the rear I would probably go with the Camaro struts with swift springs @ 6kg (since I would be using the 86 rear end as well). But then again, I have the RA28, so there's going to be some playing around with it. There's not a lot of suspension coverage for the RA28/29, mainly the earlier models.

Hmm the 22re and 3tc are nice motors, but I'm an 18rg fanboy . I drove a corolla with the 3tc in it at work the other day, and the engine ran so perfectly and the response was immediate. The owner kept really good care of that car. So you're running the weber 32/36 huh? I thought about running that one, but I'm buying the 20r sidedraft manifold from a member on 1stgen, so my plans changed a bit. How was it working out for you? I'm looking at the weber DCOE 45 right now, and will probably order from Redline too.

[808celica]

Haha crap. got rust holes everywhere cuz im right at the beach. still do-able, just gotta do everything behind my dads back

did you see those TRD toscos for sale??

Damnit!!! sorry for the thread jack

[njccmd2002]

cool you guys. Im looking at a couple to bad they are ST and one is auto. Stick GT hard to come by,

can the auto to manual swap be competed in these puppies?



this one makes me drool

[95CelicaST]

Theres a black '77 GT coupe near me for sale for $1000. 5sp and in great condition. It's tempting...

[808celica]

Theres a black '77 GT coupe near me for sale for $1000. 5sp and in great condition. It's tempting...

where are you?? i talked to some family in washington and nevada to buy one, cut it up, and send it

[95CelicaST]

Theres a black '77 GT coupe near me for sale for $1000. 5sp and in great condition. It's tempting...

where are you?? i talked to some family in washington and nevada to buy one, cut it up, and send it

If you can READ it says I'm from your mom under my name.......


No, I'm in the great PNW. Where else are you obligated to drive a Subaru?


If you were to cut this one up I'd pretty much kill you. It's mint.

[spolski07]

mmmmmmm

[SwissFerdi]

I love the look of these. They're like muscle cars, but it's a Toyota...much better.

This post has been edited by SwissFerdi: Sep 6, 2009 - 11:37 AM

[95CelicaST]

Not an intercooler - its an external oil cooler.

[SwissFerdi]

Makes sense, I was wondering why it was done like that. I'm guessing this is a drag setup?

[MaskedMan]

No no I wouldn't say it's a drag set up. It's quite common for older Japanese cars to mount the oil cooler on the outside like that. Most drag Celicas tub the rear so they can fit really wide wheels in the rear like Carey's Jz powered Celica, (thing is a beast)

[SwissFerdi]

I didn't mean the oil cooler, I meant the whole car. The rears look pretty wide.

[MaskedMan]

Sorry if I worded it weird. What I was trying to say is that it's common that old Japanese cars set up the oil cooler like that and as an additional note, that drag cars are usually set up with tubbed rear ends. The rear on the Celica that spolski posted is wide because of the flares and the crazy amount of stretch he has going on with those tires. And due to the stretch, I wouldn't say it's a drag car because it wouldn't be very beneficial for him to run such narrow tires because he would not get much traction. I didn't really want to go in depth and post a lot because I felt like I was thread jacking, but I guess when I make short posts, then things don't really make much sense huh? haha .

[SwissFerdi]

That, and the fact that I'm a complete noob. But I thought that too when I saw the rear shot and the stretched tires.

[CelicaZR]

1st Gen FTW

1GC

[SwissFerdi]

I'll take the yellow one please.

[808celica]

1st Gen FTW

1GC

Ahhh you sucka!!! wanna find me one to chop up???

met with aussies tourists at my working place. really nice bunch of people told them all the secret beach spots that most tourists dont go to

[MaskedMan]

1st Gen FTW

1GC

Ahhh you sucka!!! wanna find me one to chop up???

met with aussies tourists at my working place. really nice bunch of people told them all the secret beach spots that most tourists dont go to

Stop chopping up perfectly good Celicas! They are hard enough to come by already! If you chop up a Celica, I will go chop up some Cherry Blossom rims .

This post has been edited by MaskedMan: Sep 7, 2009 - 3:09 AM

[808celica]

1st Gen FTW

1GC

Ahhh you sucka!!! wanna find me one to chop up???

met with aussies tourists at my working place. really nice bunch of people told them all the secret beach spots that most tourists dont go to

Stop chopping up perfectly good Celicas! They are hard enough to come by already! If you chop up a Celica, I will go chop up some Cherry Blossom rims .

O___O


k i'll stop

[njccmd2002]

Theres a black '77 GT coupe near me for sale for $1000. 5sp and in great condition. It's tempting...

zip code please cause the PWN you mosted does not make sense,


1000 tempting!!!!

[95CelicaST]

PNW - Pacific North West = Western Washington/Canada border down to Portland.


And I PM'ed you back.

[cheela]

man! i seriously want one of these too. and I found one not too far from me. I think it's a GT 5spd. going for $2000.... I really want it!!! what to do what to do....

[njccmd2002]

wow i remember this thread.

[coldbluesteel]

Hey, I've got a 77GT 5spd. I want to do the 1uzfe V8 from the Lexus.

[njccmd2002]

Hey, I've got a 77GT 5spd. I want to do the 1uzfe V8 from the Lexus.

you have got a lot of frame to build. That engine will bend the weak RA. But its been done.

im more looking into the 2rz swap, looks like it could be less involved.

[coldbluesteel]

Hey, I've got a 77GT 5spd. I want to do the 1uzfe V8 from the Lexus.

you have got a lot of frame to build. That engine will bend the weak RA. But its been done.

im more looking into the 2rz swap, looks like it could be less involved.

Oh yeah, for sure. It has a good shell, only rust really is above the tail lights. Probably just cut it out and do something custom. The plan is to replace everything under the sheet metal anyway.

[njccmd2002]

are u on 1stgencelica, like to see the build..

[coldbluesteel]

are u on 1stgencelica, like to see the build..

No I don't have an account there, I may have had one before but cant remember. Unfortunately the 77 is one of 4 projects I have going at the moment. Way to many really plus we recently bought a house that I am completely renovating.

[cheela]

wow. hope it's not the first to go then.

[coldbluesteel]

wow. hope it's not the first to go then.

Not sure the others are a 93 300zx convertible, 66 Mercury Marauder, and my favorite 400+ HP 97 4runner.

[njccmd2002]

dang, thats a lot on the hands....

but just keep it and dont do anything, put a tarp and let it sit.

if you sell it youll regret it. i have two now, probably looking for another for parts for the one that i bought for parts, lol....

[coldbluesteel]

dang, thats a lot on the hands....

but just keep it and dont do anything, put a tarp and let it sit.

if you sell it youll regret it. i have two now, probably looking for another for parts for the one that i bought for parts, lol....

That is where it is right now. The Z is in the garage, because someone slashed my top, and engine problems. The Merc. is in the driveway, waiting for restore. 26,000 original miles but it sat for over 20 years in the Las Vegas heat so it needs a complete tear down and inspection before I even try to start it. Don't want to damage the motor. The 4runner is our DD 260,000 miles (200,000 by me) still running strong. Man I love Toyota dependability! Really miss my 6GC.

[SupraKid]

1uz+ITBs=FTMFW!!!

[cheela]

wow, ur hands are definitely full. hahahaha. but yeah, KEEP IT. I got my 77 coupe sitting at home too.