Nov 11, 2009 - 10:24 PM
|
|
|
Enthusiast ![]() Joined Mar 10, '09 From pembroke pines FL Currently Offline Reputation: 0 (0%) |
does anybody know where to get them and what brand is good ? and the number?
-------------------- ![]() |
![]() |
Nov 11, 2009 - 11:00 PM
|
|
|
Enthusiast ![]() Joined Jun 9, '09 From Saint Louis Currently Offline Reputation: 0 (0%) |
This is where you get all your bulb numbers - http://www.sylvania.com/ConsumerProducts/A...placementGuide/ the led guys use the same reference numbers or have a cross.
I get all of me led's from these guys. http://www.v-leds.com Haven't had one fail yet and have had their white wide angle in the gauge cluster for two years. Tag Light = 168 Backup = 1156 This post has been edited by pyeatts: Nov 11, 2009 - 11:04 PM |
Nov 13, 2009 - 8:21 AM
|
|
|
Enthusiast ![]() Joined Mar 10, '09 From pembroke pines FL Currently Offline Reputation: 0 (0%) |
thanks pyeatts. appreciate it =]
will these work? http://www.v-leds.com/Exterior-LED/Parking...748435-1-2.html for back up.? and these for the tag? http://www.v-leds.com/Exterior-LED/CornerS...481033-1-2.html i just dont wanna buy the wrong ones. This post has been edited by Candiiman: Nov 13, 2009 - 8:25 AM -------------------- ![]() |
Nov 14, 2009 - 8:53 AM
|
|
|
Enthusiast ![]() Joined Jun 9, '09 From Saint Louis Currently Offline Reputation: 0 (0%) |
Candiiman,
Both of the lamps your looking at will fit, but when your replacing lamps that use reflectors you get better results with leds that fire in all directions. These are what I use for the gauge cluster for that reason: http://www.v-leds.com/Shop/Control/fp/SFV/32481 The ones you've selected all fire only forward so they won't be as bright as the stock lamps because no light bounces off the reflector. When I first put in leds I got single led wide angle lamps and they were too dim, so I called V-leds and they put me on the right selection. They have a great customer service department that really know what works! Give them a call! |
Nov 14, 2009 - 6:11 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
make sure the diameter of the led bulb is the same as the filament bulb or atleast the socket size. spent $60 on led reverse bulbs and the diameter was a too big so i just re-sold them
This post has been edited by 808celica: Nov 14, 2009 - 6:11 PM -------------------- I don't normally drive fast, but when I do its on a curvy section of this island
![]() |
Nov 14, 2009 - 8:06 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
I tired a few for the rear plate and they were all not really bright enough. I finally went with some 12led 194 bulbs that seem to work well.
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 3:55 PM |