 car running rich |
 Nov 22, 2009 - 5:58 PM
|
 
|
|
Enthusiast  Joined Aug 14, '05 From St. Paul, MN(USA) Currently Offline Reputation: 8 (100%)  |
i have a 3sgte swap done. Everything is stock + FMIC kit + HKS BOV. I just installed an AEM UEGO wideband and the gauge is telling me im running rich. What can cause this problem? I know it can be bad in the long run but how do i adjust?
|
 |
Replies
(1 - 11)
|
Nov 22, 2009 - 6:42 PM
|
|
|
Enthusiast Joined Apr 22, '07 From Buckinghamshire, UK Currently Offline Reputation: 2 (100%) |
what management are you using?
|
|
Nov 22, 2009 - 8:44 PM
|
|
|
Enthusiast Joined Aug 14, '05 From St. Paul, MN(USA) Currently Offline Reputation: 8 (100%) |
QUOTE (FunkySR @ Nov 22, 2009 - 7:42 PM)  what management are you using? stock ecu...no management yet....just got the swap done...any ideas? |
|
Nov 22, 2009 - 8:48 PM
|
|
|
Enthusiast Joined Apr 22, '07 From Buckinghamshire, UK Currently Offline Reputation: 2 (100%) |
stock injectors as well? reset the ecu and if possible, get a new o2 sensor. Also make sure tps voltage and resistance is correct. Next, check coolant temp sensor.
J |
|
Nov 22, 2009 - 10:56 PM
|
|
|
Enthusiast Joined Aug 14, '05 From St. Paul, MN(USA) Currently Offline Reputation: 8 (100%) |
QUOTE (FunkySR @ Nov 22, 2009 - 9:48 PM) stock injectors as well? reset the ecu and if possible, get a new o2 sensor. Also make sure tps voltage and resistance is correct. Next, check coolant temp sensor. J yep..stock injectors...will reset ecu and get new o2 sensor...how do i check tps voltage and resistance? My coolant temp sensor is broken, so i think its that. |
|
Nov 22, 2009 - 11:50 PM
|
|
 Enthusiast Joined Jan 29, '07 From Hoyt Lakes, MN Currently Offline Reputation: 11 (100%) |
What are your AFRs? There should be a coolant temp sensor for the ecu signal and one for the gauge cluster. Which one is bad?
As for the TPS if you check out the BGB, you need a feeler gauge. You put it between the stopper on the throttle body. And ohm out the different pins on the TPS. It could be the o2 sensor. -------------------- 98 Celica gt red- totaled deer
94 Celica st black DD (bad weather beater)- totaled deer 95 Celica gt silver- chassis sold 88 Celica All-Trac (Burned to a crisp) 94 Celica gt white (sold) In need of a rust free chassis!!!! |
|
Nov 23, 2009 - 10:07 AM
|
|
|
Enthusiast Joined Aug 14, '05 From St. Paul, MN(USA) Currently Offline Reputation: 8 (100%) |
QUOTE (bccentaur3 @ Nov 23, 2009 - 12:50 AM) What are your AFRs? There should be a coolant temp sensor for the ecu signal and one for the gauge cluster. Which one is bad? As for the TPS if you check out the BGB, you need a feeler gauge. You put it between the stopper on the throttle body. And ohm out the different pins on the TPS. It could be the o2 sensor. when i drive its is in the 10.8 - 11.0 and when idle its in the 13.6 - 16.4(jumps around)...I get reading of the coolant temp in the gauge cluster and the broken harness clip is the brown clip on the coolant pipe/neck(i think its for the ecu signal)...using my old 5sfe o2 sensor...i will get new o2 sensor and see what happens. |
|
Nov 23, 2009 - 10:15 AM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
QUOTE (team_omega @ Nov 23, 2009 - 10:07 AM) QUOTE (bccentaur3 @ Nov 23, 2009 - 12:50 AM) What are your AFRs? There should be a coolant temp sensor for the ecu signal and one for the gauge cluster. Which one is bad? As for the TPS if you check out the BGB, you need a feeler gauge. You put it between the stopper on the throttle body. And ohm out the different pins on the TPS. It could be the o2 sensor. when i drive its is in the 10.8 - 11.0 and when idle its in the 13.6 - 16.4(jumps around)...I get reading of the coolant temp in the gauge cluster and the broken harness clip is the brown clip on the coolant pipe/neck(i think its for the ecu signal)...using my old 5sfe o2 sensor...i will get new o2 sensor and see what happens. Might be a good idea to fix this. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
|
Nov 23, 2009 - 12:00 PM
|
|
|
Enthusiast Joined Aug 14, '05 From St. Paul, MN(USA) Currently Offline Reputation: 8 (100%) |
QUOTE (lagos @ Nov 23, 2009 - 11:15 AM) QUOTE (team_omega @ Nov 23, 2009 - 10:07 AM) QUOTE (bccentaur3 @ Nov 23, 2009 - 12:50 AM) What are your AFRs? There should be a coolant temp sensor for the ecu signal and one for the gauge cluster. Which one is bad? As for the TPS if you check out the BGB, you need a feeler gauge. You put it between the stopper on the throttle body. And ohm out the different pins on the TPS. It could be the o2 sensor. when i drive its is in the 10.8 - 11.0 and when idle its in the 13.6 - 16.4(jumps around)...I get reading of the coolant temp in the gauge cluster and the broken harness clip is the brown clip on the coolant pipe/neck(i think its for the ecu signal)...using my old 5sfe o2 sensor...i will get new o2 sensor and see what happens. Might be a good idea to fix this. been looking for that clip and no luck...i just email dr. tweak to see if he has any... |
|
Nov 23, 2009 - 4:38 PM
|
|
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
5sfe coolant temp sensor uses the same plug.
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
|
Nov 23, 2009 - 5:13 PM
|
|
|
Enthusiast Joined Aug 14, '05 From St. Paul, MN(USA) Currently Offline Reputation: 8 (100%) |
QUOTE (lagos @ Nov 23, 2009 - 5:38 PM) 5sfe coolant temp sensor uses the same plug. just ordered one from drtweak from his site.... http://www.phoenixtuning.com/zenstore/inde...roducts_id=2980 hopefully its the right one... This post has been edited by team_omega: Nov 23, 2009 - 5:14 PM |
|
Nov 23, 2009 - 5:30 PM
|
|
|
Enthusiast Joined Apr 22, '07 From Buckinghamshire, UK Currently Offline Reputation: 2 (100%) |
I would avoid driving it until that is done. hopefully that will be the end of it.
|
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 19th, 2026 - 10:39 AM |