6G Celicas Forums

Welcome Guest ( Log In | Register )

> F.S. GT4 conversion ALL FRONT BUMPER PARTS FOR SALE , !!!&, front bumper parts for sale again ! ! ! Jan 25th
post Dec 29, 2009 - 9:58 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




as said, I have for sale a GT4 front end conversion

it includes
hood
bumper
crash bar with brackets
fog lights and bracket and pig tail wiring
turn signals
radiator support bar
all brackets
JDM non projector headlamps with pig tail wiring




you will get exactly what's in the picture, all parts are black,

US$1500 shipped in domestic USA


I also have a CT20b turbo that came with this front clip, it has just under 50 K miles on it, so you know is in like new condition, the turbo is still attached to the engine, and will be removed once paid for
SOLD



Greedy SP2 cat-back used
this is in great condition, it has the normal scratches on the bottom of the cat-back, not noticeable when installed, this is not ready to be shipped yet, it'll be off the car in 2 weeks time at most.
looking for
US$400.00 + shipping obo

This post has been edited by Culpable04: Jan 25, 2010 - 11:49 AM


--------------------

3 Pages V   1 2 3 >  
Start new topic
Replies (1 - 57)
post Dec 29, 2009 - 10:34 PM
+Quote Post
JuMPiiN



Enthusiast
****
Joined Nov 10, '09
From Louisiana
Currently Offline

Reputation: 5 (100%)




That's just hood bumper ext... Or comes with the engine too he.
post Dec 29, 2009 - 10:47 PM
+Quote Post
azn87

Enthusiast
****
Joined Aug 2, '06
From bay area
Currently Offline

Reputation: 21 (100%)




Intrested in steering wheel can I get pics?
post Dec 29, 2009 - 11:11 PM
+Quote Post
lilgreenyoda

Enthusiast
**
Joined Jan 22, '07
From Loveland
Currently Offline

Reputation: 4 (100%)




How much do you want for the bumper and stuff like crash bar, hood latch, fogs/wiring/switches etc?

EDIT: Cause I fail at reading. I have the hood already. So I won't trouble you for "everything but". However, if you wind up going part for part, consider me interested in everything but the hood. Thanks.

This post has been edited by lilgreenyoda: Dec 29, 2009 - 11:15 PM
post Dec 29, 2009 - 11:17 PM
+Quote Post
Mstoochn

Enthusiast
***
Joined Apr 27, '09
From West Coast Canada
Currently Offline

Reputation: 0 (0%)




do you have a small square of cedar or pine u can mount the ct20b to? I will buy it as a memento on my coffe table
post Dec 30, 2009 - 12:25 AM
+Quote Post
pittfirefighter



Enthusiast
*****
Joined Oct 10, '06
From Greensburg,PA
Currently Offline

Reputation: 27 (94%)




does it include side fenders? smile.gif

also how much if i pick it up?


--------------------
Breaking Axles...
post Dec 30, 2009 - 1:30 AM
+Quote Post
Goonter

Enthusiast
***
Joined Nov 27, '09
From Canada
Currently Offline

Reputation: 4 (100%)




if you ever decide to part out.. i'm interested in the bumper and hood together.
post Dec 30, 2009 - 6:08 AM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




QUOTE (JuMPiiN @ Dec 29, 2009 - 10:34 PM) *
That's just hood bumper ext... Or comes with the engine too he.


no engine, just exterior GT4 front end conversion


QUOTE (azn87 @ Dec 29, 2009 - 10:47 PM) *
Intrested in steering wheel can I get pics?


I'll try to get pictures today or tomorrow

QUOTE (lilgreenyoda @ Dec 29, 2009 - 11:11 PM) *
How much do you want for the bumper and stuff like crash bar, hood latch, fogs/wiring/switches etc?


EDIT: Cause I fail at reading. I have the hood already. So I won't trouble you for "everything but". However, if you wind up going part for part, consider me interested in everything but the hood. Thanks.


all that is included with this front end, is basically everything ones would need to do this right the first time, and at the moment I'm not looking to part this out, selling as a whole, if I situation changes I will post it here.


QUOTE (pittfirefighter @ Dec 30, 2009 - 12:25 AM) *
does it include side fenders? smile.gif

also how much if i pick it up?


no fenders, and PM/ed with a pick up price


QUOTE (Goonter @ Dec 30, 2009 - 1:30 AM) *
if you ever decide to part out.. i'm interested in the bumper and hood together.


not parting out at this moment, will post if I decide to.






alao just to clarify, this will include the crash bar, all related brackets, the pig tail wiring for fogs / headlamps / turn signals, all related screws and bolts. and it's not the radiator support bar, but the upper headlamp support bar that's needed for this and it will be included as well.

just the hood and bumper alone will run you over 1000 shipped on ebay, then add all the small parts needed, anyone who has done this or is in the process of, will agree that this is a great deal. I'm looking to get this out of my hands asap, so I'm not holding for a month or a day, the first person to come with the money will take it, and don't be afraid to send me your offer, prices are flexible to a degree, and of course pick up buyers can get the best out of this deal.



--------------------

post Dec 30, 2009 - 9:55 AM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




added greedy SP2 cat-back to the list

US$400.00+ shipping obo


--------------------

post Dec 30, 2009 - 7:44 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




Pictures of the steering wheel, is still installed as well, it has the normal signs of use but no tear or scratches, once cleaned and dusted off it'll be like new.




PS. I didn't notice how bad the pictures were until I saw them on the PC now lol, sorry, I'll try to get better ones next time I'm up there.


This post has been edited by Culpable04: Dec 30, 2009 - 7:44 PM


--------------------

post Dec 30, 2009 - 7:54 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




wow ur so late...

frown.gif


--------------------
God made man....
Everything else...
Made in China

post Dec 30, 2009 - 7:56 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




QUOTE (nics @ Dec 30, 2009 - 7:54 PM) *
wow ur so late...

frown.gif


how much did you spend in yours ? and does that include all the parts ?

that will give an idea to others of how good of a deal this is.



--------------------

post Dec 30, 2009 - 8:14 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (Culpable04 @ Dec 30, 2009 - 4:56 PM) *
QUOTE (nics @ Dec 30, 2009 - 7:54 PM) *
wow ur so late...

frown.gif


how much did you spend in yours ? and does that include all the parts ?

that will give an idea to others of how good of a deal this is.


i have the hood and lhd hood latch for $500 picked up

the bumper, fogs, crash bar with brackets, turns signals, Bumper to Hood Metal Retainer & Rubber Seal is a $700 shipped pending deal. still negotiating with the Upper Front Bumper Support Bar (refer to section 6 in the gt-four front end write up by azian advanced) for $80

no lights and no fenders.

the fenders i believe would be $300 shipped and lights would be $250 shipped based on ebay items

yeah its a good deal, multiple birds in one shot wink.gif



--------------------
God made man....
Everything else...
Made in China

post Dec 30, 2009 - 9:32 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




turbo is spoken for, pending payment

everything else is still available




--------------------

post Dec 31, 2009 - 1:37 AM
+Quote Post
bccentaur3



Enthusiast
*****
Joined Jan 29, '07
From Hoyt Lakes, MN
Currently Offline

Reputation: 11 (100%)




Culp, if you end up selling everything, do me a favor and keep the RHD conversion parts for me PLEASE!!!


--------------------
98 Celica gt red- totaled deer
94 Celica st black DD (bad weather beater)- totaled deer
95 Celica gt silver- chassis sold
88 Celica All-Trac (Burned to a crisp)
94 Celica gt white (sold)

In need of a rust free chassis!!!!
post Dec 31, 2009 - 6:16 AM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




QUOTE (bccentaur3 @ Dec 31, 2009 - 2:37 AM) *
Culp, if you end up selling everything, do me a favor and keep the RHD conversion parts for me PLEASE!!!


make an offer on that, whatever is not sold in 2 weeks time is going to the metal scrap yard, these parts are taking up space that is needed so things to go.


--------------------

post Dec 31, 2009 - 11:25 AM
+Quote Post
SwissFerdi

Enthusiast
*****
Joined Jun 18, '09
From Orlando
Currently Offline

Reputation: 8 (100%)




I might take that steering wheel off your hands in a few weeks IF it really is in such great condition. My offer is 100 shipped.


--------------------
'97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE
post Dec 31, 2009 - 12:28 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




QUOTE (SwissFerdi @ Dec 31, 2009 - 11:25 AM) *
I might take that steering wheel off your hands in a few weeks IF it really is in such great condition. My offer is 100 shipped.


Ferdi, that's exactly the steering wheel I was telling you that I want.

Culpable, I would gladly talk the GT4 conversion off your hands, but you know where all my money is going. Best of luck with everything to you! Hope the conversion goes to a good home.


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Dec 31, 2009 - 1:12 PM
+Quote Post
Axel04

Enthusiast
**
Joined Mar 10, '07
From Titusville, Florida
Currently Offline

Reputation: 9 (100%)




I would pos. think about the GT4 front if the finders would come with it. I need them.
post Dec 31, 2009 - 1:42 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




QUOTE (Axel04 @ Dec 31, 2009 - 2:12 PM) *
I would pos. think about the GT4 front if the finders would come with it. I need them.



I can include the fenders, but once you get them you'll see they are useless, they have damage on the sides from shipping, it'll be cheaper to get fenders elsewhere than try to fix these ones, but if that's what's killing the deal for people, yeah, I'll include the paperweights I mean the fenders. same price as before.



--------------------

post Dec 31, 2009 - 2:10 PM
+Quote Post
95st-celica



Enthusiast
*****
Joined Mar 29, '07
From Philly
Currently Offline

Reputation: 11 (100%)




culp, what size is the exhaust?


--------------------


I"M NOT A TOYOTA FAN, IM A FANATIC
1984 accord hatch 5 speed (T-Belt)-Junkyard
1991 VDUB jetta wolfsburg Ed. 5 speed (clutch)-junkyard
1988 Dodge Aries K (sold)
1969 Chevy El camino - Traded for celica
1991 Dodge Daytona-Traded for Celica
1988 Chevy Camaro-Work in Progress
1989 Ford Mustang LX 5.0 - For Sale
1995 Toyota Celica-Work in Progress
post Dec 31, 2009 - 3:43 PM
+Quote Post
lagos



Enthusiast
*****
Joined Aug 31, '02
From Philadelphia, PA
Currently Offline

Reputation: 8 (100%)




QUOTE (95st-celica @ Dec 31, 2009 - 2:10 PM) *
culp, what size is the exhaust?



its 2.3inch.


--------------------
15PSI - 30MPG - Megasquirt Tuned
post Dec 31, 2009 - 4:33 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




it's 2.3 inches ( outer diameter ) 2.25 inches inner diameter



--------------------

post Jan 1, 2010 - 2:06 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




bump

Let's hear your offers guys


--------------------

post Jan 1, 2010 - 2:48 PM
+Quote Post
Mstoochn

Enthusiast
***
Joined Apr 27, '09
From West Coast Canada
Currently Offline

Reputation: 0 (0%)




QUOTE (Culpable04 @ Dec 30, 2009 - 9:32 PM) *
turbo is spoken for, pending payment

everything else is still available


damit culp.. i was serious about what i asked you.

I STILL HAVE YOUR JDM CC 778-240-2290, text me or something.... i stil owe yo ithis
post Jan 1, 2010 - 4:28 PM
+Quote Post
drumbum



Enthusiast
**
Joined Nov 29, '09
From Milwaukee
Currently Offline

Reputation: 0 (50%)




why would i need the fenders? isnt the conversion direct bolt on to my fenders. Also is this EVERYTHING "http://www.6gc.net/forums/index.php?showtopic=63523" even the LH hood latch" I need for the front end conversion for my 1998 celica gt. im interested but you said you couldnt hold it. But if you have to take it to the scrap yard pm me what they offer you and i would give you a little more than what they offer you since im a little low on cash. But i think someone will buy it before you have to do that.

Good luck on the sale.

Thanks.

This post has been edited by drumbum: Jan 1, 2010 - 4:40 PM


--------------------


Weekend Warrior-----1998 Celica GT: White
Daily Driver----------1997 Celica GT: Blurple
post Jan 1, 2010 - 4:43 PM
+Quote Post
96stgreendemon



Enthusiast
*****
Joined Oct 7, '09
From Northern kentucky
Currently Offline

Reputation: 8 (90%)




interested in the front bumper, hood, latch, crashbar and lights, how much if i pick it up?


--------------------
1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3

2001 Solar yellow Lexus IS300

2001 Dodge ram 1500 Off-road edition
post Jan 1, 2010 - 10:07 PM
+Quote Post
_Jim_



Enthusiast
***
Joined Sep 22, '08
From Bergenfield
Currently Offline

Reputation: 5 (78%)




QUOTE (drumbum @ Jan 1, 2010 - 5:28 PM) *
why would i need the fenders? isnt the conversion direct bolt on to my fenders. Also is this EVERYTHING "http://www.6gc.net/forums/index.php?showtopic=63523" even the LH hood latch" I need for the front end conversion for my 1998 celica gt. im interested but you said you couldnt hold it. But if you have to take it to the scrap yard pm me what they offer you and i would give you a little more than what they offer you since im a little low on cash. But i think someone will buy it before you have to do that.

Good luck on the sale.

Thanks.


LOL, He wont EVER be sending the hood and bumper to the scrap yard. He ment he wasnt holding the hood and bumper for people scrounging up the money for this awesome deal, "first come (with the money) first serve". When selling something like this, you wouldnt believe the amount of PM's you recieve wanting payment plans...or they want you to hold it for them for an undertermined about of time.

Now if there is something not listed in his FS thread that you want off the front half cut (EX. window washer fluid tank) feel free to send him a PM/post with an offer...as any parts left of the front half cut after all items listed have sold will then be sent to the scrap yard.


--------------------
330whp 309ft/lbs @ 21 PSI
post Jan 1, 2010 - 10:15 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




QUOTE (drumbum @ Jan 1, 2010 - 4:28 PM) *
why would i need the fenders? isnt the conversion direct bolt on to my fenders. Also is this EVERYTHING "http://www.6gc.net/forums/index.php?showtopic=63523" even the LH hood latch" I need for the front end conversion for my 1998 celica gt. im interested but you said you couldnt hold it. But if you have to take it to the scrap yard pm me what they offer you and i would give you a little more than what they offer you since im a little low on cash. But i think someone will buy it before you have to do that.

Good luck on the sale.

Thanks.



not going to the scrap yard, I'm not holding this until someone's piggy bank has enough money for it tho. I'm friends with some people here and I don't mind giving someone a good deal on this, but I also need cash for stuff so there is a balance between how nice of a deal I give and how soon I need the money.

QUOTE (96stgreendemon @ Jan 1, 2010 - 4:43 PM) *
interested in the front bumper, hood, latch, crashbar and lights, how much if i pick it up?


Pm'ed


--------------------

post Jan 1, 2010 - 10:30 PM
+Quote Post
SwissFerdi

Enthusiast
*****
Joined Jun 18, '09
From Orlando
Currently Offline

Reputation: 8 (100%)




I think you should give this to richee3, seeing as he's about to swap.


--------------------
'97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE
post Jan 3, 2010 - 1:17 AM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




Bump !



--------------------

post Jan 3, 2010 - 2:35 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




QUOTE (SwissFerdi @ Jan 1, 2010 - 11:30 PM) *
I think you should give this to richee3, seeing as he's about to swap.


I agree wink.gif

But I only have $400 that I can spend on car parts at the moment. That's not buying me anything except a few smaller things, not a GT4 front end. Like Culp said, he doesn't need to wait for my piggy bank to fill up. I'd take the GT4 front end if I had the money, and I'd take the exhaust for sure if I wasn't getting ready to swap.


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Jan 4, 2010 - 12:56 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




I'll give it till the end of the week, if no ones grabd the front end conversion, I'll part it out


--------------------

post Jan 4, 2010 - 1:25 PM
+Quote Post
import1993

Enthusiast

Joined Aug 28, '09
From Fort worth,Texas
Currently Offline

Reputation: 2 (100%)




I'll take hood and bumper when u decide to part it.
post Jan 5, 2010 - 1:44 AM
+Quote Post
mak5603



Enthusiast
****
Joined Oct 20, '08
From Seattle, WA
Currently Offline

Reputation: 5 (100%)




also interested in the hood and the crash bar

This post has been edited by mak5603: Jan 5, 2010 - 1:45 AM


--------------------
2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE
post Jan 5, 2010 - 7:33 AM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




hood is pending sale to Fate, he's picking up friday / saturday

QUOTE (import1993 @ Jan 4, 2010 - 1:25 PM) *
I'll take hood and bumper when u decide to part it.


I pm'ed you about the bumper, waiting for response


QUOTE (mak5603 @ Jan 5, 2010 - 1:44 AM) *
also interested in the hood and the crash bar


PM'ed you about crash bar


still available,

upper support bar and head lamps


--------------------

post Jan 5, 2010 - 10:28 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




front bumper, turn signals, foglight bezel, foglights, crash bar, brackets, upper headlight support bar Pending sale to... someone lol

once hood is picked up and payment for above parts is received, this will be completed.


--------------------

post Jan 5, 2010 - 10:49 PM
+Quote Post
_Jim_



Enthusiast
***
Joined Sep 22, '08
From Bergenfield
Currently Offline

Reputation: 5 (78%)




Someone scored themselves an AMAZING deal!


--------------------
330whp 309ft/lbs @ 21 PSI
post Jan 5, 2010 - 11:36 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




QUOTE (_Jim_ @ Jan 5, 2010 - 11:49 PM) *
Someone scored themselves an AMAZING deal!


Yes, they did! Who could it be? The suspense is killing me!!!


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Jan 12, 2010 - 1:30 AM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (Culpable04 @ Jan 5, 2010 - 7:28 PM) *
front bumper, turn signals, foglight bezel, foglights, crash bar, brackets, upper headlight support bar Pending sale to... someone lol

once hood is picked up and payment for above parts is received, this will be completed.


let me know if this doesnt work out. do you have a time frame of this to be complete?

i need

front bumper, turn signals, foglight bezel, foglights, crash bar, brackets, upper headlight support bar, fenders


--------------------
God made man....
Everything else...
Made in China

post Jan 12, 2010 - 7:36 AM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




hood was picked up, bumper was paid for,

it's funny how after things are sold I get real offers on all this, ebfore I got stufff like 450 for bumper AND hood SHIPPED tongue.gif isn't that a deal ?

sorry but everything is sold, except for RHD conversion, ST205 front brakes, AWD tranny, set of headlamps, and a few interior stuff like radio, stock amps and such


--------------------

post Jan 12, 2010 - 1:31 PM
+Quote Post
bccentaur3



Enthusiast
*****
Joined Jan 29, '07
From Hoyt Lakes, MN
Currently Offline

Reputation: 11 (100%)




Hey culp, do you think you can send me a pic of the state the front clip is in right now? My girlsfriends ST was smashed up and I really wanted to redo the nose of the car, plus RHD for down the road wink.gif.


--------------------
98 Celica gt red- totaled deer
94 Celica st black DD (bad weather beater)- totaled deer
95 Celica gt silver- chassis sold
88 Celica All-Trac (Burned to a crisp)
94 Celica gt white (sold)

In need of a rust free chassis!!!!
post Jan 12, 2010 - 1:32 PM
+Quote Post
CAMAricer



Enthusiast
***
Joined Jul 25, '07
From San Francisco
Currently Offline

Reputation: 3 (100%)




So...how much for the front brakes?

QUOTE (Culpable04 @ Jan 12, 2010 - 7:36 AM) *
sorry but everything is sold, except for RHD conversion, ST205 front brakes, AWD tranny, set of headlamps, and a few interior stuff like radio, stock amps and such



--------------------

2002 SC430 (WC) - 19" SSR Comp-H, Daizen swaybars, Sparco Demons, JDM Soarer conversion, carbon fiber spoiler, Injen intake, front strut bar, drilled/slotted Brembo rotors
1997 Celica ST (DD) - 17" ADR, ViS Zyclone CF hood, ViS CF hatch, K&N intake, Invader body kit
post Jan 12, 2010 - 2:44 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




QUOTE (bccentaur3 @ Jan 12, 2010 - 2:31 PM) *
Hey culp, do you think you can send me a pic of the state the front clip is in right now? My girlsfriends ST was smashed up and I really wanted to redo the nose of the car, plus RHD for down the road wink.gif.



Only RHD conersion is available, everything is was sold.
make an offer on the RHD conversion stuff.

QUOTE (CAMAricer @ Jan 12, 2010 - 2:32 PM) *
So...how much for the front brakes?

QUOTE (Culpable04 @ Jan 12, 2010 - 7:36 AM) *
sorry but everything is sold, except for RHD conversion, ST205 front brakes, AWD tranny, set of headlamps, and a few interior stuff like radio, stock amps and such



PM'ed


--------------------

post Jan 13, 2010 - 2:31 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




front brakes sold


--------------------

post Jan 13, 2010 - 8:26 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




Headlamps SOLD !


--------------------

post Jan 25, 2010 - 2:49 AM
+Quote Post
CAMAricer



Enthusiast
***
Joined Jul 25, '07
From San Francisco
Currently Offline

Reputation: 3 (100%)




Hey, what's the word on that tracking number?


--------------------

2002 SC430 (WC) - 19" SSR Comp-H, Daizen swaybars, Sparco Demons, JDM Soarer conversion, carbon fiber spoiler, Injen intake, front strut bar, drilled/slotted Brembo rotors
1997 Celica ST (DD) - 17" ADR, ViS Zyclone CF hood, ViS CF hatch, K&N intake, Invader body kit
post Jan 25, 2010 - 9:42 AM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




QUOTE (CAMAricer @ Jan 25, 2010 - 2:49 AM) *
Hey, what's the word on that tracking number?



I didn't get to the shop till this weekend, so your calipers are going out today,

P.S.
next time you can try a PM, you would have had the same answer and quicker, as I check Pm's before I start to go through the forums



--------------------

post Jan 25, 2010 - 11:50 AM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




front bumper , foglight, brackets, crash bar, upper support bar, grill, everything for the conversion except the hood is back on sale, previous buyer has gone a different direction so he doesn't need these parts anymore.

PM me your offers, looking to get these out ASAP !!


--------------------

post Jan 25, 2010 - 1:17 PM
+Quote Post
ajmorris1977



Enthusiast
***
Joined Jul 13, '09
Currently Offline

Reputation: 9 (91%)




QUOTE (Culpable04 @ Jan 25, 2010 - 11:50 AM) *
front bumper , foglight, brackets, crash bar, upper support bar, grill, everything for the conversion except the hood is back on sale, previous buyer has gone a different direction so he doesn't need these parts anymore.

PM me your offers, looking to get these out ASAP !!


how much for the front bumper?


--------------------
You're here for a good time, not a long time. - Colin McRae
When in doubt... Flat out! - Colin McRae
Understeer is when you hit the wall with the front of the car.
Oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall.
Torque is how far you take the wall with you....
post Jan 25, 2010 - 2:20 PM
+Quote Post
SwissFerdi

Enthusiast
*****
Joined Jun 18, '09
From Orlando
Currently Offline

Reputation: 8 (100%)




QUOTE (Culpable04 @ Jan 25, 2010 - 11:50 AM) *
front bumper , foglight, brackets, crash bar, upper support bar, grill, everything for the conversion except the hood is back on sale, previous buyer has gone a different direction so he doesn't need these parts anymore.


JD is leaving us. frown.gif


--------------------
'97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE
post Jan 25, 2010 - 2:36 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




QUOTE (ajmorris1977 @ Jan 25, 2010 - 2:17 PM) *
QUOTE (Culpable04 @ Jan 25, 2010 - 11:50 AM) *
front bumper , foglight, brackets, crash bar, upper support bar, grill, everything for the conversion except the hood is back on sale, previous buyer has gone a different direction so he doesn't need these parts anymore.

PM me your offers, looking to get these out ASAP !!


how much for the front bumper?



PM'ed


--------------------

post Jan 26, 2010 - 1:13 PM
+Quote Post
CAMAricer



Enthusiast
***
Joined Jul 25, '07
From San Francisco
Currently Offline

Reputation: 3 (100%)




Check your box, you might have too many messages. I did PM you.

QUOTE (Culpable04 @ Jan 25, 2010 - 6:42 AM) *
QUOTE (CAMAricer @ Jan 25, 2010 - 2:49 AM) *
Hey, what's the word on that tracking number?



I didn't get to the shop till this weekend, so your calipers are going out today,

P.S.
next time you can try a PM, you would have had the same answer and quicker, as I check Pm's before I start to go through the forums



--------------------

2002 SC430 (WC) - 19" SSR Comp-H, Daizen swaybars, Sparco Demons, JDM Soarer conversion, carbon fiber spoiler, Injen intake, front strut bar, drilled/slotted Brembo rotors
1997 Celica ST (DD) - 17" ADR, ViS Zyclone CF hood, ViS CF hatch, K&N intake, Invader body kit
post Jan 26, 2010 - 9:24 PM
+Quote Post
rivs

Enthusiast
*
Joined Jan 27, '08
From Mass
Currently Offline

Reputation: 6 (100%)




QUOTE (Culpable04 @ Jan 25, 2010 - 11:50 AM) *
front bumper , foglight, brackets, crash bar, upper support bar, grill, everything for the conversion except the hood is back on sale, previous buyer has gone a different direction so he doesn't need these parts anymore.

PM me your offers, looking to get these out ASAP !!


How much for the upper support bar?
post Jan 26, 2010 - 9:31 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




pm sent


--------------------
God made man....
Everything else...
Made in China

post Jan 27, 2010 - 3:53 PM
+Quote Post
ajmorris1977



Enthusiast
***
Joined Jul 13, '09
Currently Offline

Reputation: 9 (91%)




this guy is getting jacked around by the person who actually owns the parts, unfortunatly he seems to be stuck between a rock and a hard place, sad as i was about to send him money.


--------------------
You're here for a good time, not a long time. - Colin McRae
When in doubt... Flat out! - Colin McRae
Understeer is when you hit the wall with the front of the car.
Oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall.
Torque is how far you take the wall with you....
post Jan 27, 2010 - 5:28 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




QUOTE (ajmorris1977 @ Jan 27, 2010 - 3:53 PM) *
this guy is getting jacked around by the person who actually owns the parts, unfortunatly he seems to be stuck between a rock and a hard place, sad as i was about to send him money.


rolleyes.gif

you lose.


bumper is not for sale anymore


--------------------

post Jan 27, 2010 - 8:53 PM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




QUOTE (Culpable04 @ Dec 30, 2009 - 6:08 AM) *
I'm looking to get this out of my hands asap, so I'm not holding for a month or a day, the first person to come with the money will take it, and don't be afraid to send me your offer, prices are flexible to a degree, and of course pick up buyers can get the best out of this deal.



in case someone missed that


--------------------


3 Pages V   1 2 3 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 24th, 2025 - 5:42 PM