 Clutch problem... Again |
 Jan 10, 2010 - 3:00 AM
|
 
|
|
Enthusiast  Joined Jul 15, '07 From High ridge MO Currently Offline Reputation: 0 (0%)  |
Okay so my clutch is having the same problem as before. I replaced the slave and I bleeded the line and it worked for about 10 miles then again the same thing. did I not get all the air out ot what?
|
 |
Replies
(1 - 13)
|
Jan 10, 2010 - 4:02 AM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
probably the master.
-------------------- |
|
Jan 10, 2010 - 9:45 AM
|
|
 Enthusiast Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%) |
master... or disc has bad springs
-------------------- Breaking Axles...
|
|
Jan 10, 2010 - 2:20 PM
|
|
|
Enthusiast Joined Jul 15, '07 From High ridge MO Currently Offline Reputation: 0 (0%) |
There is a little air in the line. I must of bleeded it like 30 times and still air in the line. I dont think its the master.
|
|
Jan 10, 2010 - 4:14 PM
|
|
 Enthusiast Joined Apr 18, '05 From Lincoln, Ar Currently Offline Reputation: 7 (100%) |
You check to see if you have a leak somewhere?
|
|
Jan 10, 2010 - 4:26 PM
|
|
|
Enthusiast Joined Jul 15, '07 From High ridge MO Currently Offline Reputation: 0 (0%) |
Yes. no leaks
|
|
Jan 10, 2010 - 4:31 PM
|
|
|
Enthusiast Joined Jul 15, '07 From High ridge MO Currently Offline Reputation: 0 (0%) |
I am at a freinds house and his dad tells me i should only pump the clutch one time and hold it then bleed it. He says that me pumping the clutch might be moving air from one side of the line to the other. Is this true? Seems to me that one pump will not build any pressure.
|
|
Jan 10, 2010 - 7:38 PM
|
|
 Enthusiast Joined Apr 23, '08 From Muskego,Wi Currently Offline Reputation: 8 (100%) |
you wanna open the bleeder when you have the clutch to the floor, than have someone tighten it when its still to the floor and repeat that a few times.
-------------------- 2nd Gen 3s-gte.... It lives!
97celiman "92-gt-quit making up random acronyms that dont mean anything. the only real acronym is JDM" |
|
Jan 10, 2010 - 7:40 PM
|
|
|
Enthusiast Joined Jun 10, '07 From Riverside, CA Currently Offline Reputation: 4 (100%) |
^^^^ agreed, and if that doesn't work, it is most likely, guaranteed your master cylinder, had the same issue a couple yrs back.
--------------------  She's Alive...... Again!!! QUOTE (95CelicaST @ Nov 17, 2009 - 5:53 AM)  QUOTE (SwissFerdi @ Nov 16, 2009 - 8:53 PM) QUOTE (95CelicaST @ Nov 16, 2009 - 11:51 PM) Sweet Jesus. You rang? Sorry, wrong number. :laugh: |
|
Jan 11, 2010 - 2:56 AM
|
|
|
Enthusiast Joined Jul 15, '07 From High ridge MO Currently Offline Reputation: 0 (0%) |
The master cylinder I think is working. The fluid is going through it. The main problem is I bleed it and there will be pressure then I get no pressure if I keep bleeding. I have to keep bleeding cause I know all the air is not out of the line. I have not tried to gravity bleed it yet. Do i have to push the clutch in then gravity bleed. I have never had to do it before.
|
|
Jan 11, 2010 - 3:22 AM
|
|
 Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
i told you to gravity bleed it, that doesnt need any pumping. That is the sure way to get all air out.
-------------------- I don't normally drive fast, but when I do its on a curvy section of this island
 |
|
Jan 11, 2010 - 3:54 AM
|
|
|
Enthusiast Joined Jul 15, '07 From High ridge MO Currently Offline Reputation: 0 (0%) |
k
|
|
Jan 11, 2010 - 5:21 AM
|
|
|
Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
what's the feeling you have on the clutch pedal? does it feel normal then slowly soften?
-------------------- I don't normally drive fast, but when I do its on a curvy section of this island
|
|
Jan 11, 2010 - 2:06 PM
|
|
|
Enthusiast Joined Jul 15, '07 From High ridge MO Currently Offline Reputation: 0 (0%) |
So I tried to gravity bleed it and its been about half an hour and the fluid level has not droped and there is no fluid coming out of the bleeder screw. Does this mean its my master?
|
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 26th, 2025 - 5:14 PM |