fs:808celica partout, yup best believe it Options

[808celica]

Car is going to be stripped and melted down after everything is gone. need money for a down payment on the Yaris S, yes im getting one because the FT is taking too damn long.

K those asking for my sideskirts, uhhhhh................helloo remember??? Consequences :shakehead:



Euro $175 + shipping and TRD front lips make offer


TRD rear reps make offer, left on IIRC has been chipped from being too low, wont affect mounting and you wont see it unless you stare


3pod Supra Gauge that i bought from Tigawoods, $80 + shipping


JDM wide view mirror , you can see your backseat passengers $25 + shipping


V_D smoked gas lid $50 + shipping


JDM angle brackets with modified mounting hardware for US plates $20 + shipping


Clear SideMarkers $15 + shipping


GT4 rear strut with leather and caps $140 + shipping


GT4 spoiler as whole or just the blocks make offer. GT-Four lettering is better than V_D's replica (more visible)


EURO plate bezel, toyota silver, $175 + shipping


There's other crap i need to get rid of

-spare hazard button
-radio bezel (silver and black)
-shifter bezel (silver and black)
-pass and drivers vents (silver and black)
-center coin trap (silver and black)
-Junction Produce Neck rests, pair $50 shipped, black with black lettering
-V_D armrest cover, black with red stitching $20 obo shipped
-5 194 360` LEDS Hyper white
-2 74 hyper white LED (glove box and key ring bulbs)
-Gauge cluster shroud (silver and black)


There's more f/s unless my Pops says dont sell it so yeeeeeeeah

This post has been edited by 808celica: Apr 28, 2010 - 5:26 PM

[MaskedMan]

First I'd like to say, Don't part out your car dammit.

Secondly, hold those riser blocks for me .

Also, question on the license plate angle bracket. How is the adjustment for width? both of my bumpers only allow for Japanese license plates, so the holes are wider apart. So since it's a JDM bracket, it should fit the Japanese plates/bumpers no problem?

[808celica]

bracket is a yes

why part out, cuz i hate this specific VIN stamped Celica

[MaskedMan]

I have changed my avatar to show my disapproval. Well, I am in need of a license plate bracket thingy and I even though I can buy one where I live, I would like to have a part of your car to remember you by. Please autograph it as well (if it is not too much trouble).

[808celica]

wtf why not just buy it there

[808celica]

A friend of mine SOLD his Alltrac Gen4, 3rd Fastest Alltrac on the island, and 1 of 2 white Immaculate ones in Hawaii

.........for this, which was stock until he started dropping money




call me what you want, say what ever. I'd like to invite you to Hawaii to Punch me in the face I'm getting my Yaris S


This post has been edited by 808celica: Apr 28, 2010 - 4:37 AM

[Tigawoods]

i know exactly where you are in life and i understand that.
i respect the way you are getting rid of the car too.
dont let any other single person drive that.
throw it into a damn volcano when you done but part the hell out of it


dibs on front splitters and the key ring bulb
i want your car to live on in mine.


This post has been edited by Tigawoods: Apr 28, 2010 - 8:18 AM

[jordisonjr]

is the V_D armrest cover just the cover? or is it already installed on the armrest?

[Keiri]

I'll take the center armrest cover Jon. Tell me what shipping is to zip code 28391 and I'll pay.

PS: This partout makes me sad. : |

[Chaggi]

dibs on the clear side markers =]. let me know how much to ship to 92126 thx

This post has been edited by Chaggi: Apr 28, 2010 - 12:29 PM

[808celica]

is the V_D armrest cover just the cover? or is it already installed on the armrest?

i just tightly wrapped it, no glue involved. Also my watch made a little knick in the material.

I'll take the center armrest cover Jon. Tell me what shipping is to zip code 28391 and I'll pay.

PS: This partout makes me sad. : |

Also my watch made a little knick in the material, $5 shipping, I'll be using the priority mail heavy duty fiber envelope to ship the cover.

dibs on the clear side markers =]. let me know how much to ship to 92126 thx

shipping is like $6 if i can find the right box size to keep it safe in

this blows...i always thought your car was the dope freshness.

but,
how much for the leds? and would you be willing to sell the rear strut padding and strut covers (takin' a shot).

just the padding and covers?? unless you find someone that wants just the strut bar then yeah

and $3 each led, just gotta find a way to ship it safely. I dont know where i put my farraday cage envelopes but i'll go find them

Dude don't tell me you're parting the car because of the wheel issue. Seriously, I'll explain to Derrick, and just send you whatever you need. From the suspension all the way to the wheel, in ONE piece.

If Jon accepts this, I'll gladly chip in $20 or so towards shipping.

This is the car that I based mine off of in the beginning! Its the Celica that made me want to start modding!

i have a spare parts car also id gladly give up any parts to keep you out of a yaris hard to c that car die for no reason but ill trade u a whole celica for the body kits/ gauges all aftermarket ect ?

K there is a reason for this partout and melt down(sooner or later) and if you guys didnt get it from the first page then i wont tell you. Go ask Tigawoods or something

[Tigawoods]

euro not the trd's
are the euros cracked a bit?

[808celica]

euro not the trd's
are the euros cracked a bit?

just scrapes, i guess too much "E-40 Tell me when to go" playing in the car

[Keiri]

Jon, can you take a picture of the nick? Thanks.

[joehernandez]

sooner or later,
i would like to see more pitures of the triple gauge pod.
will it come with the gauges?

[captb]

sent you a pm. are you selling the clear turn signals? how bout ur rims?

so whats gonna happen to cco?

EDIT: interested in these too: airbag module(if in good condition), radio pocket with lid, clear courtesy door lens, 194 & 74 leds, the plastic piece that goes around the steering wheel and ignition.

This post has been edited by captb: Apr 28, 2010 - 8:28 PM

[Oholic]

interested in the clear turns

[808celica]

interested in the clear turns

i didnt post it up for sale

do you guys ever read??? i got pms for skirts, the turns, and other crap that isnt listed. Until i list them try not to ask k

[captb]

interested in the clear turns

i didnt post it up for sale

do you guys ever read??? i got pms for skirts, the turns, and other crap that isnt listed. Until i list them try not to ask k

my bad.. didnt realize it wasnt a complete partout.

[TerBeau]

u have pm. skirts are on ur page now thats y i asked noww

[808celica]

hawaii people can ask Joe

terbeau sorry skirts still not for sale

[TerBeau]

hawaii people can ask Joe

terbeau sorry skirts still not for sale

buttt buttt buttt!? money no talk? ehh worth a shot thanks good luck. btwbuy another celica cheap fun and uhhh SEXYY

hawaii people can ask Joe

terbeau sorry skirts still not for sale

buttt buttt buttt!? money no talk? ehh worth a shot thanks good luck. btwbuy another celica cheap fun and uhhh SEXYY

wahoo first on page threee!!!

[Espo]

Okay, to get this back on topic.

Have the risers been sold? And are they replicas or authentic?

[808celica]

Okay, to get this back on topic.

Have the risers been sold? And are they replicas or authentic?

nope, i believe they're DCW ones. i got them like 3 weeks after i got the car. you can see the lettering better than the blocks Herosblade bought from V_D

everyone just stop.
input from every member doesnt need to be posted.

mod please delete the posts or people please stop posting unless it pertains to the parts 808 is selling

Mike just leave them, i guess down deep inside they're crying for me. Almost like when their mom told them Santa was fake

How much for the low beams?

not for sale, retrofitting them for Herosblade

and here I am, a day late catching all this...wow

Yeah sorry Mike (lol 2 mikes) didnt tell you.

Also i stepped off the CCO throne and gave the position away

This post has been edited by presure2: May 1, 2010 - 9:20 AM

[joehernandez]

i would like to see more pictures of the triple gauge pod.
will it come with the gauges?

[808celica]

i would like to see more pictures of the triple gauge pod.
will it come with the gauges?

being a dick i'll say, that's all i have as of now
i can get a few up, if i feel like being a nice guy

unless Mike (Tigawoods) still has some old pics

[808celica]

Police Siren kit for sale too still installed on the car

This post has been edited by 808celica: Apr 30, 2010 - 4:33 AM

[xIIscrapsIIx]

How much for the low beams?

[manphibian]

OK, it took 25 minutes of my Friday night to clean this thread.

If it goes the same way again, i'll delete it. This is a for sale thread, if you're not interested in buying anything, gtfo.

[pipes]

plate braket shipping to 02126

[terbear4god4life]

you use wheel spacers how much you want for em??

[presure2]

next one who posts somthing stupid in this thread gets the banstick.

[808celica]

OK, it took 25 minutes of my Friday night to clean this thread.


If it goes the same way again, i'll delete it. This is a for sale thread, if you're not interested in buying anything, gtfo.

thanks Luke for your time

plate braket shipping to 02126

pm me pipes, i hoooks you up

you use wheel spacers how much you want for em??

I dont use spacers, i can get 20-25mm spacers, but recents acts cloud my judgement

[Keiri]

Jon, pictures of the knick on the armrest cover please. Thanks.

[Espo]

Risers look excellent. How much are you asking for them?

[JuMPiiN]

intrested in the risers if he doesnt take them

[808celica]

Jon, pictures of the knick on the armrest cover please. Thanks.

call me tomorrow 808-389-7983 and wake my ass up to take those pics

Risers look excellent. How much are you asking for them?

make me an offer, gonna take some time to find a decent box to safely ship these

[easternpiro1]

thanks for the invite to hawaii man but i dont wanna punch u in the face, i wanna slap ya around a bit after i kill ya!!


Bump for a cool guy, good luck with the sale bro

[Keiri]

Jon, pictures of the knick on the armrest cover please. Thanks.

call me tomorrow 808-389-7983 and wake my ass up to take those pics

Risers look excellent. How much are you asking for them?

make me an offer, gonna take some time to find a decent box to safely ship these

Just tell me a good time (your time) to call and I'll do it.

[sunwukongg]

i need parts for a manual swap, are you going to part those parts to? or just what you have posted? just wondering.

[KAOS]

Jon - have you checked your PM's lately?

[joesmith94celica...]

still got the coil? or is yours distributor mounted?

[808celica]

No i havent checked my pms, making it a habit to no come on like i used to. Mostly because i have little free time now with 2 jobs.

Some PMs replied, most ignored, some deleted. I may have missed some cuz i got like 15 pms

___________________________

I have a spare Ignitor coil and ECU (5spd Non-Cali Spec)

[Espo]

No i havent checked my pms, making it a habit to no come on like i used to. Mostly because i have little free time now with 2 jobs.

Some PMs replied, most ignored, some deleted. I may have missed some cuz i got like 15 pms

___________________________

I have a spare Ignitor coil and ECU (5spd Non-Cali Spec)

So should I re send mine..? I'm really interested in those riser blocks.

[808celica]

bumpo

[dennist202]

hello

How much will it cost to send him to the Netherlands?

V_D smoked gas lid $50 + shipping

thank you

Dennis

[charming6gmoz]

Hey do u still have the armrest.
I don't need the cover I need the lid
and this stuff.

http://www.6gc.net/forums/index.php?showtopic=73855

let me know thank you

[presure2]

Some PMs replied, most ignored, some deleted. I may have missed some cuz i got like 15 pms

if your not gonna respond to people who post in your FS thread, should i just delete it?