FS: Incomplete Celica GT Partout, Looking for something? I might have it. Options

[ZGear]

*UPDATE* 9/20/2010

*I will only sell the taillights as a pair since they are both tinted.

*The driver side high beam headlight had water in it and now has a yelllow haze on the lens, I will not sell it unless you really need it badly. I would prefer to sell all of them at a discounted price or sell them as a pair for the low beam and individually for the passenger high.

Feel free to ask for parts and pictures and I'm reasonable to any offers you may want, otherwise we can negotiate. Paypal only, gvang87@hotmail.com.

Some pics in my build thread.
My Build with some parts car pics

What I have:

Plastic interiors
Leather rear seats in good condition
Leather front seats in bad condition
Carpet
Seatbelts
Windowglass and trim
All the dash and subframe component (heater core, etc.)
Door inserts/covers
Rear Tinted Tail lights
Rear 3rd brake light with TURBO stencil (when you brake it lights up turbo)
Front bumper
Headlights (all 3 are fine, but for the driver high / shows in the pic of yellow haze)
And some others I may have forgotten

==================================================

What I don't have:

Anything I took for my ST to GT conversion
-Motor/Trans
-Axles
-Suspensions
-Knuckles
-Mounts
-Wiring
-Door tweeters
-Front lip has been taken
-Side skirts are pending status
-Rear lip, I've given up trying to take it off. (someone's molded project became my nightmare)
And some others I may have forgotten

This post has been edited by ZGear: Sep 20, 2010 - 10:42 PM

[94celicadude]

Do you possibly have a passenger side power mirror?

[HectortheRican]

Do you maybe have a rear ash tray?

[tony55343]

You happen to have the passenger fender in decent condition? those little vents permanent or stick on? lol

This post has been edited by tony55343: Sep 16, 2010 - 4:28 PM

[ZGear]

Do you possibly have a passenger side power mirror?

I'll take pics of it and get a shipping quote.

Do you maybe have a rear ash tray?

I believe I still have the center console, I'll look for it and get pics and shipping quote.

You happen to have the passenger fender in decent condition? those little vents permanent or stick on? lol

Fenders are decent if you can sand the vents, they are stickers. I'll double check the condition.

[b1gr3d]

you has pm

[tony55343]

Awesome let me know about the fender, i can sand my car is silver so id need to get it re sprayed anyways.

[SpadeBF]

Im looking for passenger side high n low beam, would be interested in some pictures

[thatmr2]

I need the low beams for both side. how much shipped to 01610?

[thatmr2]

and I need the carpets and ashtray for the center console. thanks

[350niZmo]

pm'ed you

[JasonTX]

looking for the interior door pannels if they have power everything. and also the rear 1/4 windows both sides (hatchback) if the ruber moulding around em is in good shape. shipped to 77573.

lmk

jec

[bhawk94]

PM'd

[Zake]

do you have a rear view mirror?

[ZGear]

Sorry, I work constantly and I'm trying my best to get to everyone. I'm basing my prices against EBay sellers. If you have any questions or concern please feel free to add.

Do you possibly have a passenger side power mirror?

I'll do $15 shipped

http://cgi.ebay.com/ebaymotors/94-95-96-97...=item3cafbe1439

Do you maybe have a rear ash tray?

I don't know what these go for, but since everyone wants one I'll do $6 obo shipped.

You happen to have the passenger fender in decent condition? those little vents permanent or stick on? lol

Since you're local, I'm basing the price against U Pull. I'll do $25 since all you have to do to get it looking good again is sanding it down.





This post has been edited by ZGear: Sep 20, 2010 - 11:07 PM

[ZGear]

All PMs replied!

[ZGear]

Im looking for passenger side high n low beam, would be interested in some pictures

I'd prefer to sell them as a whole or just a pair of lows and the pass high individually.

I need the low beams for both side. how much shipped to 01610?

I'll get back to ya on that!

and I need the carpets and ashtray for the center console. thanks

Carpet is black and needs a good cleaning, I'll have to get back to you on the pics and the actual condition.

looking for the interior door panels if they have power everything. and also the rear 1/4 windows both sides (hatchback) if the ruber moulding around em is in good shape. shipped to 77573.


lmk

jec

The door panels are powered, but the side tab broke on one side of the window regulator.

See the following picture for detail:









If you want it, I'll have to get back to you on the shipping price for the panels.

do you have a rear view mirror?

I'll do $30obo shipped!

http://cgi.ebay.com/ebaymotors/94-99-Toyot...=item4152c3bdeb

[ZGear]

you has pm

The side tab broke on one side of the window regulator.

See the following picture for detail:









If you want it, I'll do $20 shipped.

http://cgi.ebay.com/ebaymotors/94-99-Toyot...ck_Parts_Access


Pics of the radio bezel:



I'll do $40 obo shipped.

http://cgi.ebay.com/ebaymotors/94-99-Toyot...=item3f0313b17b

This post has been edited by ZGear: Sep 20, 2010 - 11:06 PM

[115celi]

Do you have the trim peice that goes under the driver side dash? I need the outer peice that the hood release mounts to. Pics please, how much shipped to 53955? Thanks, Mike

This post has been edited by 115celi: Sep 20, 2010 - 11:36 PM

[ZGear]

Do you have the trim peice that goes under the driver side dash? I need the outer peice that the hood release mounts to. Pics please, how much shipped to 53955? Thanks, Mike

I'll get back to ya on that one!

[b1gr3d]

No, the regulator. What you have a pic of is the control switch. The regulator is attached to the motor( the gold channel) or price me the motor and reg assebmly

[nik]

how much for the rear window on the driver side shipped to 83815

[woo10]

do you have the parcel tray in good condition?

[leofouc]

hi how much for the rear seat to calgary and are you selling the quarter panels. thx

[SoDo]

Do you have these tabs that hold the hatch cover in place? I just need the driver side but will buy both if necessary.

[HectortheRican]

pm'd

[Originalfuture]

*UPDATE* 9/20/2010

*I will only sell the taillights as a pair since they are both tinted.

*The driver side high beam headlight had water in it and now has a yelllow haze on the lens, I will not sell it unless you really need it badly. I would prefer to sell all of them at a discounted price or sell them as a pair for the low beam and individually for the passenger high.

Feel free to ask for parts and pictures and I'm reasonable to any offers you may want, otherwise we can negotiate. Paypal only, gvang87@hotmail.com.

Some pics in my build thread.
My Build with some parts car pics

What I have:

Plastic interiors
Leather rear seats in good condition
Leather front seats in bad condition
Carpet
Seatbelts
Windowglass and trim
All the dash and subframe component (heater core, etc.)
Door inserts/covers
Rear Tinted Tail lights
Rear 3rd brake light with TURBO stencil (when you brake it lights up turbo)
Front bumper
Headlights (all 3 are fine, but for the driver high / shows in the pic of yellow haze)
And some others I may have forgotten

==================================================

What I don't have:

Anything I took for my ST to GT conversion
-Motor/Trans
-Axles
-Suspensions
-Knuckles
-Mounts
-Wiring
-Door tweeters
-Front lip has been taken
-Side skirts are pending status
-Rear lip, I've given up trying to take it off. (someone's molded project became my nightmare)
And some others I may have forgotten

If you have the Driver side seat still, can you detach the rails without damaging plastic an the hinges? I don't need the actual cushions just the metal hinges for the seats and the rails under the seat with plastic coverings.

[scrackam]

what about the back leather seats? good condition? still got them?

[Liquid_Smoke]

Can i get a picture and a price for the rear lights

[Originalfuture]

94-98 GT hatchback ------I am looking for just the driver side metal hinges and rails that are on the bottom of the seat and attaches the the back part to the seat.(Metal and plastic mechanism only) ***(I don't need the cushions.)****



Also looking for the Heat insulated hood liner and clips.

[thatmr2]

Do you the passenger side fender liner? If so how much shipped to 01610? Thank you.

[Bigblock]

PM'd ya ZGear--

Fenders // doors--??--

[tony55343]

Hey man I sent you a pm, when can i swing by and grab that fender? my number is in your pm box pleae get in touch!!

[donnyxiong]

do u still have front bumper cover?