body help Options

[Rcdel239]

Hey there forum. Well guys to be honest I'm mad jealous of the half the celicas I see here and envy the work and time you guys put into the celicas.
My main concern is what can I do to my celica. I think the gt4 bumber is awesome but I dont know what it would take to put it on my celica.
Well to get straight to my question, What lip or lip extensions can I put on my front, rear, and side skirts to give my car the simple but touch celica jdm look.
I have pics of my ride on my profile to show the base model it is.
Thanks guys

[mkernz22]

Welcome to the forum man!

You have a choice of a few side skirts. There's the OEM '96+ ones, that I have, and there's also the 404 skirts. Presure2 has the 404 ones if you haven't already seen them. There are other aftermarket side skirts that you can get off of ebay, but they will probably require some fitment.

For the rear, there's the SS-III splitters (I'm selling mine actually) and the TRD splitters. I think there's a full wrap around, but don't quote me on that.

As for the front, there's the SS-III splitters for the 96+ bumper. If you're going with the GT4 bumper, there's a few lips, but I don't know much about them yet. I bet another member will be able to answer that for you

Hope that somewhat helps!

[96stgreendemon]

I have the SSIII kit on my car, front and rear can be bought from Dustin15Brown, as far as side skirts go i found mine on car-part.com under rocker panel molding, the fitment of the kit is not bad, but im a perfectionist and had to have no gaps what so ever and molded mine in, all can be bought for somewhere around 500, plus paint etc
here is the car

[Rcdel239]

Welcome to the forum man!

You have a choice of a few side skirts. There's the OEM '96+ ones, that I have, and there's also the 404 skirts. Presure2 has the 404 ones if you haven't already seen them. There are other aftermarket side skirts that you can get off of ebay, but they will probably require some fitment.

For the rear, there's the SS-III splitters (I'm selling mine actually) and the TRD splitters. I think there's a full wrap around, but don't quote me on that.

As for the front, there's the SS-III splitters for the 96+ bumper. If you're going with the GT4 bumper, there's a few lips, but I don't know much about them yet. I bet another member will be able to answer that for you

Hope that somewhat helps!

thanks some help is alot of help for me right now. Appriciate it

[Rcdel239]

Welcome to the forum man!

You have a choice of a few side skirts. There's the OEM '96+ ones, that I have, and there's also the 404 skirts. Presure2 has the 404 ones if you haven't already seen them. There are other aftermarket side skirts that you can get off of ebay, but they will probably require some fitment.

For the rear, there's the SS-III splitters (I'm selling mine actually) and the TRD splitters. I think there's a full wrap around, but don't quote me on that.

As for the front, there's the SS-III splitters for the 96+ bumper. If you're going with the GT4 bumper, there's a few lips, but I don't know much about them yet. I bet another member will be able to answer that for you

Hope that somewhat helps!

thanks some help is alot of help for me right now. Appriciate it

I look at my car and the pic of your car and the front bumber isn't the same. will this be a problem ?
also my car isn't a hatch. what nice wing/spoiler would you suggest or can fit my ride
and thanks for the info man I appriciate the advice

[mkernz22]

Get the TRD wing for the coupe, it looks sexy!
As for the front end either upgrade to a 96+ Bumper to use the splitters or get a GT-4 hood and bumper

[Rcdel239]

[quote name='mkernz22' date='Dec 21, 2010 - 10:05 PM' post='891379']
Get the TRD wing for the coupe, it looks sexy!
As for the front end either upgrade to a 96+ Bumper to use the splitters or get a GT-4 hood and bumper
[/quote

what does it take to put the 96+ bumber. conversion of any sort ?

[eboz74]

could that same wing fit the convertible?

[mkernz22]

@eboz - it should fit the vert as it has the same rear end

@rcdel - just take your old one off and bolt this one on!

[Rcdel239]

@eboz - it should fit the vert as it has the same rear end

@rcdel - just take your old one off and bolt this one on!

alright so i get a 96+ front bumber and i can get the splitters and just about any lip. do i need to do the same for thr rear.
and can i still use the trd wing even though my celica isnt the hatch

[bccentaur3]

Welcome to the forum man!

You have a choice of a few side skirts. There's the OEM '96+ ones, that I have, and there's also the 404 skirts. Presure2 has the 404 ones if you haven't already seen them. There are other aftermarket side skirts that you can get off of ebay, but they will probably require some fitment.

For the rear, there's the SS-III splitters (I'm selling mine actually) and the TRD splitters. I think there's a full wrap around, but don't quote me on that.

As for the front, there's the SS-III splitters for the 96+ bumper. If you're going with the GT4 bumper, there's a few lips, but I don't know much about them yet. I bet another member will be able to answer that for you

Hope that somewhat helps!

Correction presure2 aka Manny has TRD skirts not 404

[richee3]

There are also TRD splitters for the front bumper. They fit both the '94-95 bumper like you have and the '96+ bumper, but they look better on the earlier model cars. Here is 808celica's car with TRD front splitters.


SS-III rear skirts, SS-III/GT4 rear wing. (whatthe's car.)


TRD rear splitters, TRD side skirts, TRD rear wing. (an02's car)


Two coupes with the TRD rear wing. (anabolik and another random 6gc.)


Also, I notice you are in Naples. There is a member local to you there. He posts quite a bit on this forum. His screen name is SwissFerdi. You might send him a PM.

[96stgreendemon]

Richee3, most of that is correct but, the wing that Whatthe has is the same as mine, it is not a GT-Four wing, it is actually off of the 98 and 99 SSIII, just look at the emblems on mine, they were not just stuck on there and mine are authentic risers not replicas

[richee3]

Richee3, most of that is correct but, the wing that Whatthe has is the same as mine, it is not a GT-Four wing, it is actually off of the 98 and 99 SSIII, just look at the emblems on mine, they were not just stuck on there and mine are authentic risers not replicas

SS-III rear skirts, SS-III/GT4 rear wing.

And I labeled it as such.

[Rcdel239]

There are also TRD splitters for the front bumper. They fit both the '94-95 bumper like you have and the '96+ bumper, but they look better on the earlier model cars. Here is 808celica's car with TRD front splitters.


SS-III rear skirts, SS-III/GT4 rear wing. (whatthe's car.)


TRD rear splitters, TRD side skirts, TRD rear wing. (an02's car)


Two coupes with the TRD rear wing. (anabolik and another random 6gc.)


Also, I notice you are in Naples. There is a member local to you there. He posts quite a bit on this forum. His screen name is SwissFerdi. You might send him a PM.

kick ass celica niceee. thanks richee

[Rcdel239]

There are also TRD splitters for the front bumper. They fit both the '94-95 bumper like you have and the '96+ bumper, but they look better on the earlier model cars. Here is 808celica's car with TRD front splitters.


SS-III rear skirts, SS-III/GT4 rear wing. (whatthe's car.)


TRD rear splitters, TRD side skirts, TRD rear wing. (an02's car)


Two coupes with the TRD rear wing. (anabolik and another random 6gc.)


Also, I notice you are in Naples. There is a member local to you there. He posts quite a bit on this forum. His screen name is SwissFerdi. You might send him a PM.

hey richee i appreciate the help. so where do you think i can find these 94,95 splitters

[RavenAegis45]

Two coupes with the TRD rear wing. (anabolik and another random 6gc.)


Also, I notice you are in Naples. There is a member local to you there. He posts quite a bit on this forum. His screen name is SwissFerdi. You might send him a PM.

Dont get me wrong but isn't that Orange model a Curren? I can't be 100% but that sidemarker isnt found on Celica's? Just a quick thought good post btw

[richee3]

OP- no problem. You can find the TRD front and rear splitters on Ebay, and some members on here (dustin15brown, vincent_doggy) sell replica splitters. Although, if I'm not mistaken, both members only have SS-III splitters.

Raven- you're right, the orange one is a Curren. I also realized after I made that post that neither car is anabolik's. His is green.

[Rcdel239]

OP- no problem. You can find the TRD front and rear splitters on Ebay, and some members on here (dustin15brown, vincent_doggy) sell replica splitters. Although, if I'm not mistaken, both members only have SS-III splitters.

Raven- you're right, the orange one is a Curren. I also realized after I made that post that neither car is anabolik's. His is green.

and again were talking about the 94 95 splitters right, those are the ones i can find in ebay or from dustin15brown, vincent_doggy

[richee3]

Yeah, the TRD front splitters will fit both the '94-95 and the '96+ front bumpers. They just tend to look better on the pre-facelift bumper. They even fir the GT4 front bumper, provided that notches are cut in them. Here they are on presure2's (GT4 front end, TRD front splitters) car with the notches cut in them.



I had a set like this on my car. ('96+ front bumper, TRD splitters with GT4 notches cut in them.)




The SS-III rear splitters will fit any year Celica, excluding the coupe and convertible. Those are slightly longer than the hatchback. The SS-III front splitters that the members here sell were designed to work with the '96+ front bumper, but members have fitted them to their '94-'95 front bumper and one member even mounted them to his GT4 front bumper. There will just be a slight gap between the splitter and the bumper if they aren't matched to each other.

The TRD front splitters will be easiest to find on Ebay, but they don't pop up as often as TRD rear splitters.

This post has been edited by richee3: Dec 29, 2010 - 1:25 AM

[Rcdel239]

Yeah, the TRD front splitters will fit both the '94-95 and the '96+ front bumpers. They just tend to look better on the pre-facelift bumper. They even fir the GT4 front bumper, provided that notches are cut in them. Here they are on presure2's (GT4 front end, TRD front splitters) car with the notches cut in them.



I had a set like this on my car. ('96+ front bumper, TRD splitters with GT4 notches cut in them.)




The SS-III rear splitters will fit any year Celica, excluding the coupe and convertible. Those are slightly longer than the hatchback. The SS-III front splitters that the members here sell were designed to work with the '96+ front bumper, but members have fitted them to their '94-'95 front bumper and one member even mounted them to his GT4 front bumper. There will just be a slight gap between the splitter and the bumper if they aren't matched to each other.

The TRD front splitters will be easiest to find on Ebay, but they don't pop up as often as TRD rear splitters.

alright cool. thanks alot richee you helped alot. im glad my first forum question was a long one
well here comes a sweet celica. hopefully. thanks

[Rcdel239]

Yeah, the TRD front splitters will fit both the '94-95 and the '96+ front bumpers. They just tend to look better on the pre-facelift bumper. They even fir the GT4 front bumper, provided that notches are cut in them. Here they are on presure2's (GT4 front end, TRD front splitters) car with the notches cut in them.



I had a set like this on my car. ('96+ front bumper, TRD splitters with GT4 notches cut in them.)




The SS-III rear splitters will fit any year Celica, excluding the coupe and convertible. Those are slightly longer than the hatchback. The SS-III front splitters that the members here sell were designed to work with the '96+ front bumper, but members have fitted them to their '94-'95 front bumper and one member even mounted them to his GT4 front bumper. There will just be a slight gap between the splitter and the bumper if they aren't matched to each other.

The TRD front splitters will be easiest to find on Ebay, but they don't pop up as often as TRD rear splitters.

alright so i pretty much understand my front. but then what about my rear. it seems as like there are no splitters or extensions for my coupe.
and thanks alot for the help. im hoping to bring the site a hot 94 coupe

[richee3]

No problem. The front is easy. Coupes and convertibles have it a little bit harder when it comes to finding rear splitters. The back of the car is just a little bit longer, so you have to find specific splitters. Your best bet is to search for "Curren." A Curren is basically a Celica coupe with a different front end. Toyota made TRD rear splitters to fit it. A few members here have them. They are a little bit harder to find, but you can find them if you are patient enough.





Be sure to post pictures of your coupe up

[Rcdel239]

No problem. The front is easy. Coupes and convertibles have it a little bit harder when it comes to finding rear splitters. The back of the car is just a little bit longer, so you have to find specific splitters. Your best bet is to search for "Curren." A Curren is basically a Celica coupe with a different front end. Toyota made TRD rear splitters to fit it. A few members here have them. They are a little bit harder to find, but you can find them if you are patient enough.





Be sure to post pictures of your coupe up

got it. thanks alot richee. now i even learned about a type of celica ive never even heard of. that curren celica looks kick ass.

[TerBeau]

ok you have one like mine. i havea 94 st also mine is a hatch though. anyway i did the ss111 front splitters and trd rears its prolly the best look for the preface bumper like ours. ill give you a before and after pic..

here is a before pic without the splitters


here is an after of the front splitters



and here is my trd rear


and of course i have my riser blocks under my stock wing and my 96+ side skirts

[Rcdel239]

ok you have one like mine. i havea 94 st also mine is a hatch though. anyway i did the ss111 front splitters and trd rears its prolly the best look for the preface bumper like ours. ill give you a before and after pic..

here is a before pic without the splitters


here is an after of the front splitters



and here is my trd rear


and of course i have my riser blocks under my stock wing and my 96+ side skirts

oh was it difficult to get the front splitters to look right? what did you have to do ? and where can i find a pair of ssIII ?

[TerBeau]

these splitters were made for 96+ but work great on the earlier years. these install fairly easy. i used some of the stock tabs and drilled into the buper in some spots. they fit snug and flush one thing you may want to do is also have double sided tape to hepl hold it tight against. buth you can get these splitters from these two guys. (dustin15brown, vincent_doggy) good quality stuff and sometimes cheaper than ebay.

[Rcdel239]

these splitters were made for 96+ but work great on the earlier years. these install fairly easy. i used some of the stock tabs and drilled into the buper in some spots. they fit snug and flush one thing you may want to do is also have double sided tape to hepl hold it tight against. buth you can get these splitters from these two guys. (dustin15brown, vincent_doggy) good quality stuff and sometimes cheaper than ebay.

nice thanks alot man. i appreciate the help. i was told i can get trd splitters but these ssIII appeal to my eye alot more

[TerBeau]

same here more sleek to me. i also like the edgy look but id rather the ssIII