FS: The Story of my Winter/Part Out Extravaganza, 7A-FE CAI, Vincent's Sills/Mats/Gas Door, FULL PART OUT Options

[Espo]

So I'm going to try and make a fairly long story short, but above is how my connection with my Celica ended.

This past winter brought loads of problems after a fairly eventful summer, and that headlight project I was going to try and pull through on. Unfortunately, I was in and out of work until recently, so I was never able to get a start on that, but eventually I'll sell one set of custom headlights to some lucky person here - but don't hold your breath.

To make things short, as I mentioned, winter brought a slew of problems, tires needing replacement, several check engine lights (a few o2 sensors in my exhaust), mishaps involving black ice and curbs, and just general problems, no matter how hard I tried to be careful. My driver's side CV joint was on it's way out, and then finally, a couple weeks ago, my hood latch failed on the highway, see above, and caused almost $5,000 in damage - insurance totaled the car, but I've retained it to part it out - I have too much valuable stuff on it to just let it go for about half that price. So without further ado, here's how I plan on running this:

• No items will be held without a deposit - all deposits are 100% refundable.
• I will check in on this about three days a week, if not more often - I work four out of seven days a week and my schedule is rather packed on those days, so please bear with me.
• First come, first serve, unless...
• ...two or more people want the same item and have all sent me PMs around the same time, I'll manage bidding between the parties. Bidding will take the fashion of a "maximum bid gets it right away", so I don't have to banter back and forth and the price of an item doesn't skyrocket needlessly - it'll simply go to whoever feels it has the most value to them. If I feel you're going to overpay for an item, I'll cut you a break - I'm here to help the community, not make money (although it is nice to have some extra cash around now :]). I will ask all parties what they feel the item in question is worth, and whoever says the most gets it, that simple.
• All prices listed are final unless marked otherwise or you have a close offer to what I'm asking - I'm well aware there're a few things I have no idea what the price of which would go for, so as mentioned, I'll mark it and take offers.
• I have categorized the items into various sections for easiest viewing, starting with the items I would expect to go first...first, and so on and so forth down the line.
• All prices are without shipping unless marked otherwise. For quick discerning, a blue price indicates a value without shipping, a green price includes shipping. International shipping will have to be on a case-by-case basis, I have no experience with shipping items outside the US except to Canada. I may have to charge shipping on items marked "$xx Shipped" on international bids, considering most items marked that way are less than the price of shipping to countries other than Canada.
• I apologize in advance for the terrible lighting, it was overcast today. More pictures can be taken on request.
• All items shipped upon receipt of payment in full, tracking information will be provided as soon as I get home from doing that (approx. 10 mins) - all items pending will ship on the soonest possible day I have free.
• If you want something I haven't listed, ask - everything on the car and in the engine (1.8 7AFE) is good with the exception of the driver's CV joint, the hood, windshield, roof and actual sunroof - the sunroof motor components are a-ok.

Since this is a long post and a lot to sort through and edit, please see my last post (click me!) regarding the status of items FIRST before asking for shipping or proposing to buy an item - someone may have bought it already and I just haven't updated yet, but the last post will ALWAYS be current.

JDM/Custom Items

• Item: JDM Headlights - SOLD
• Price: $675 + Shipping
• Notes: These are in absolutely mint condition, not a scratch or blemish. Comes with 12K HIDs in the low beams, I pointed them all the way to the right since I didn't want to do the cutoff modification. Considering these are going for $950+Shipping from RPMGarage, I think this is a fair price. Throw in an extra $5 for the stock H1 bulbs if you like (http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0728.jpg [Never used]) and they're yours.

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0703.jpg

• Item: JDM Tail Lights - SOLD
• Price: $140 + Shipping
• Notes: Again, also in mint condition without a scratch or blemish - I bought these for over $200 last summer. Comes with JDM Harnesses!

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0704.jpg

http://i18.photobucket.com/albums/b148/Tys...ut/CIMG0705.jpg

• Item: 7A-FE Cold Air Intake
• Price: $80 + Shipping
• Notes: I have no idea what this is actually worth, offers are welcome. I will do my research if I suspect you're giving me a low blow. Make on the filter says "Predator". It's dirty here, will be cleaned up before going - I gave it a red finish before the winter, it's held up great.

• Item: Vincent's Door Sills
• Price: $80+Shipping (Conditional)
• Notes:

The weather stripping is missing partially on each of these, and a couple areas on the driver side sill have been scuffed by my door cards. These are yours for $80+Shipping as is, or for an extra $10, I'll mask off the lightup area and give them a nice chrome refinish. Comes with enough wiring to make it work, I lost some behind the dash taking these out. Includes the epicenter, and my stock door sills that I stuck them to as well.

• Item: Vincent's Floor Mats (Red Trim, Used)
• Price: $60 + Shipping
• Notes: The rear ones are in like-new condition, I think feet may have been on them literally two or three times. The driver's side one is worn from my feet and a manual car, the passenger one is in decent condition.

• Item: Vincent's Smoked Gas Door
• Price: $45 + Shipping
• Notes: The rod and bolts are rusty, and there's a long but faint scratch or smear on the door. I can replace them for $10 extra, but the door won't open on it's own without a replacement rod. I used a long keychain to hold the gas door latch open and pull it open by hand. Kind of embarassing aha but it worked while I had to do it.

• Item: TRD Red Stitched Shift Knob - SOLD
• Price: $35 Shipped
• Notes:

It's a little dirty. I can try restoring the red stitching where my hand has faded it with some blue magic cleaner if it pleases you. $35 shipped to you anywhere in the US.

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0709.jpg

• Item: Fog Lights w/Brackets - SOLD
• Price: $50 + Shipping
• Notes: Rust free and work great. Got these from a user here who lived in Cali, they've only seen one winter and haven't been affected at all. I can include the relay and multi-function switch (not pictured) for an extra $35.

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0710.jpg

• Item: Aftermarket Diamond Clear Turns - SOLD
• Price: $20+ Shipping
• Notes: Includes the screws to mount these - driver's side screw head you have to be careful with though. Push HARD and turn to ensure you don't strip it any more than I did. Also includes the amber bulbs (not pictured) that came with these.

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0713.jpg

• Item: Lambo Hinges
• Price: $250 + Shipping
• Notes: The driver's side hinge only seems to want to work occasionally, hence the price on this - the passenger side shock works fine. Driver's side hinge worked great when I got it, then winter decompressed the shock the rest of the way, I'm sure. Bought used from another user here for $350 and has been on the car for less than a year. Again, the driver's side hinge gives assistance lifting the door, but will not hold it unless temps are above 80* (or so it seems.) These will be a hassle to get to because they're holding the doors on, obviously. May be one of the last things to go, but you may put a deposit down on these if you're sure you want them.

Driver's Side:

Passenger Side:

Opened (In 80*F weather, as mentioned):

Miscellaneous Panels and Lights

• Item: JDM Clear Sides - SOLD
• Price: $25 + Shipping
• Notes:

Never used - my JDM fenders I thought were going to fit were damaged beyond fitment, so I bought these for naught.

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0711.jpg

• Item: Center Console w/ Blue Clock - SOLD
• Price: $25 Shipped
• Notes:

It's got a Koni sticker on it, what could be better!? Clock lights up a teal blue, no broken brackets, hazard button works.

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0712.jpg

• Item: US Amber Sides
• Price: $15 Shipped
• Notes: Amber sides, they're great!

• Item: Courtesy Lights
• Price: $13 Shipped
• Notes: Don't you love these?

• Item: 25th Anni. No. 027 Rearview Mirror
• Price: $45 Shipped
• Notes: Wanna look like you're a '96 Celica? More specifically, mine? This guy'll do the trick. No idea what the mirror is actually worth.

• Item: Keyring Halo w/Super Bright Red LED - SOLD
• Price: $30 Shipped
• Notes: When I say super bright LED, I mean it. If you look directly at it, you could get spotted vision. Trust me - I had to hardwire this to my cigarette lighter, so it's got two quick-disconnect terminals on the...well, terminals, so you can do the same thing or wire it in properly if your Celica supports it.

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0719.jpg

Sound Equipment

• Item: JVC KD-HDR50 Head Unit - SOLD
• Price: $100 + Shipping
• Notes: Changes color to some ridiculous 256,000 different possibilites using an RGB mixer you set. AUX IN, USB input for iPod with either head unit or iPod control, 50x4 MOSFET power supply, built in custom EQ (sub bass, bass, mid bass, mid, mid high, high), adjustable power levels to sub (0 - +8) built-in HD FM Radio, does FM/AM, bluetooth and satellite available with add-ons, supports subwoofers, pre-wired to the factory wires - comes with a remote with velcro on the back, and I believe I have an extra loop strip with adhesive to stick it to somewhere so you can mount the remote wherever you like. The little black box seen is a ground loop isolator, and is included with your purchase. I love this thing, but it won't be going in my new car.

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0718.jpg

• Item: Dual 300W 2 Channel Amp
• Price: $35 Shipped
• Notes:

I ran a 10" subwoofer on this, it's meant to power speakers. Never had an issue with it in three years of using it.

• Item: Alpine Type S Speakers
• Price: $125 + Shipping
• Notes: These sound absolutely fantastic in the car, simply won't distort from my JVC head unit, and they're easy to mount to the stock mounts - a little drilling is all that's required. Still work like they're brand new, and I paid double what I'm asking for them. I cut all bass going to these, so really only the tweeters have been used.

Body Panels & Other Misc. Stuff

• Item: Hatchback License Plate Bezel
• Price: $25 Shipped
• Notes: Not entirely sure what this goes for. It's black, like my car was - factory finish. No visible blemishes once installed as far as I know.

• Item: Gauge Cluster Bezel
• Price: $17 Shipped
• Notes: It's in good condition.

• Item: GT Gauge Cluster (221K Miles)
• Price: $30 Shipped
• Notes: Stock cluster with 221,202 miles on it. Not the one in my car with 194K and glow gauges in it.

• Item: Celica Fender Badges - SOLD
• Price: $27 Shipped
• Notes: Fender badges in pretty decent condition. I re-painted the dragon a brighter red a long time ago, it's held up pretty well.

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0727.jpg

• Item: Passenger & Driver Fender - SOLD
• Price: Driver: $50 + Shipping | Passenger: $30 + Shipping | Both: $67 + Shipping
• Notes: This one I'm kinda peeved at. The driver side fender is the original one, with pinstriping included, 194K in road chips and all that. It was in worse condition than the passenger fender...until today. I walked back to put the front bumper away from shooting pictures, and a small gust of wind took my passenger fender and planted it on the cement, causing some serious chipping. I've got before and after photos for the passenger side one - it doesn't have a pinstripe. I can try masking off the rest of the fender and rattlecan-restoring the chipped edge for an extra $15. (Cost of supplies.) But I warn you, the chips are deep, sanding will be involved, and it probably won't look too great, since I don't have professional tools.

Passenger Before:

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0729.jpg

After:

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0735.jpg
http://i18.photobucket.com/albums/b148/Tys...ut/CIMG0736.jpg

Driver's Side:

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0731.jpg

• Item: 96+ Front Bumper - SOLD
• Price: $125 + Shipping
• Notes: Look at that smiling face, don't you wanna take it home with you? License plate NOT included (Sorry, I need to turn that guy in) - bumper is in relatively good condition, there's a bit of spiderwebbing of the paint due to bumper expansion/contraction. I'm open to offers on this, not sure what it really goes for.

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0730.jpg

• Item: Driver's Side OEM Side Skirt - SOLD
• Price: $40 + Shipping
• Notes: The passenger one had a small incident involving a curb, so I don't have pictures of it - it has a small hole in the front corner, and scraping all along the bottom - I'll throw it in for another $15 if you want to take a shot at restoring it. This guy, however is in excellent condition, no visible blemishes and obviously fits perfectly due to it being OEM.

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0732.jpg

• Item: Hatchback Rear Bumper - SOLD
• Price: $100 + Shipping
• Notes: The original bumper that came with the car, so it's got it's 194K worth of parking lot taps and whatnot. I can mask off the area and re-prime/paint/clear/sand this since most of the chips aren't too deep, for an extra $25. Other than that, everything is intact and good to mount. Open to offers as I'm not sure what this goes for.

http://i18.photobucket.com/albums/b148/Tyshindu/PartOut/CIMG0733.jpg
http://i18.photobucket.com/albums/b148/Tys...ut/CIMG0734.jpg

Unremoved/Unphotographed Parts
These parts I have no pictures of - it's supposed to rain all this week unfortunately, so getting to these will be an issue.

• Item: Stock Door Hinges
• Price: $60 Shipped
• Notes: All four hinges are here, they all work great, no squeaks, nada.

• Item: Headlight Mounting Brackets
• Price: $17 Shipped
• Notes: The things that keep your headlights aligned properly - triangular in shape, I forget exactly where they go. They're lower in the assembly though. Necessary for proper alignment if yours are bent.

• Item: Vibrant Performance 1.75" -> 2.25" -> 2.5" Exhaust - SOLD
• Price: $400 + Shipping
• Info: This includes a re-assembleable, mandrel bent exhaust - starts at 1.75" for the 4-2-1 header, increases to 2.25" at the Magnaflow laser spun catalytic converter (won't throw your CEL) moves directly to a Vibrant Performance Ultra Quiet Stainless Steel Resonator, 2.25" piping following stock bends all the way back until the Vibrant Performance Stainless Steel Muffler, which increases to a 2.5" opening. Sounds great, gives a solid horsepower increase (Drops ~2 seconds off your 60 if you shift properly) and most importantly is quiet enough not to get you in trouble, unless you go hard on the throttle all the time. I've never been ticketed for it, only pulled over once, and let off - and cops are murderous about that stuff out this way. I paid over $500 for the parts alone, this will come in pieces so that you can re-assemble it and install it yourself in approximately an hour, with basic tools. Exhaust clamps shut the parts that detach from each other. Muffler hangs down at an angle.

• Item: 25th Anniversary Seats - SOLD
• Price: $250 + Shipping
• Notes: I'll have pictures of these as soon as I can, but they're the standard US seat pattern with a blue-purple-yellow twist, and embroidered with the word Celica - they look kinda like the photo below, with less gray.

http://carphotos.cardomain.com/ride_images...60003_large.jpg

• Item: Eibach Sportline Springs/Koni GR2 Struts (Or something similar, not sure of the model of the struts)
• Price: Make me an offer - it'll likely be the last thing to come off the car before I send the shell to the junk yard.
• Notes: Car rides very low with these - you've got maybe 4" clearance. I heard it was a 1" drop from stock - struts are adjustable stiffness. Soft rides great, stiff eliminates all body roll. I'm thinking in the ballpark of $500, but I have no idea what these are actually worth. Been on the car three years.

This post has been edited by Espo: Jun 12, 2011 - 7:37 PM

[eduardorq]

pm'd

i've interested in Keyring Halo w/Super Bright Red LED
how much the shipping cost to Spain?

i'll pay with paypal.

thanks.

This post has been edited by eduardorq: May 17, 2011 - 6:20 AM

[JasonTX]

would like the shift knob, fenderbadges, fenders shipped to 77880. you havnt listed but also need rear 1/4 windows with moulding in good shape and the pass. side hinge for the privacy hatch cover

also intrested in the seats but will need pics of the actual seats.

will you cut me a deal on the whole package?

let me know what ya think and paypal address

thanks

-jec

This post has been edited by JasonTX: May 16, 2011 - 10:07 PM

[94st_santos]

pm sent

[CoreyST]

How much shipping for the passenger fender to 19945

This post has been edited by CoreyST: May 17, 2011 - 5:22 AM

[Espo]

I have 9 PMs to respond to - bear with me for a few minutes while I sort through everything.

• Sold Keyring Halo.
• Sale pending on engine under plastics.
• Bidding going for side skirts (three parties - now down to two parties)
• Sale pending on head unit.
• Bidding going for center console (two parties)
• Sale pending for fenders, badges, shift knob, rear 1/4 windows w/molding, pass side privacy hinge. @CoreyST, you're going to have to send me a PM if you want in on bidding for the fender.
• Sale pending on front bumper.

This post has been edited by Espo: May 17, 2011 - 4:49 PM

[CoreyST]

If you've already got someone I won't bother, I got something else that just came up anyway so I'll find one another time.

[trdproven]

good stuff GLWS

[JasonTX]

saw the pics and pm's everything looks good on the seats. maybe we can throw all the loose stuff in the box for the seats. i dunno what will work best.

either way let me know the paypal address and i can pay for the stuff you figured and we can we can find out if its cheaper to ship all the loose stuff in the big box for the seats and i'll pay the difference. or let me know when you have a price on all of it shiped

thanks

-jec

[xmaniex23]

How much for shipping for the fog lights shipped to 90004. Thanks...

[Artega]

you got PM

[SwissFerdi]

PM sent.

[Espo]

Oh boy, 14 PMs to go through, I got home from work a little while ago - next items will ship Friday when I have off from work.

xmaniex, $15, they'll fit into a large flat rate box, well protected.

Current progress from previous post, updating as you see this:

• Sold Keyring Halo.
• Sold engine under plastics. Pending shipping estimate Friday.
• All parties didn't want to bid on the skirts, I think.
• Sale fell through on head unit.
• Sale pending for center console.
• Totals being discussed for fenders, badges, shift knob, rear 1/4 windows w/molding, pass side privacy hinge, driver's side window regulator/motor, and seats. Pending shipping estimate Friday.
• Sale pending on front bumper.
• Sale pending on clear turns.
• Sale pending on clear sides.
• Sale pending on JDM tails.

All PMs have been responded to, first post updated with a few things.

This post has been edited by Espo: May 20, 2011 - 1:40 AM

[mmmchocolate]

Sorry off topic

But your layout on your opening FS post is beautifully organized and well done. What do you do for a living?

[Espo]

Sorry off topic

But your layout on your opening FS post is beautifully organized and well done. What do you do for a living?

Currently, I'm a line cook at Carabba's Italian Grill, but I'm a Web Design student. Might explain something

Thanks for the compliment! I appreciate it.

11 more PMs to go through. Fun fun fun fun.
Edit: Everyone's been responded to that PMed me. Current status below.
-------

• Sold engine under plastics. Shifter surround going with these. Pending shipping estimate Friday.
• Pending sale on head unit/center console.
• Sale pending for fenders, badges, shift knob, rear 1/4 windows w/molding, pass side privacy hinge, and seats. Pending shipping estimate Friday.
• Sale pending on front bumper.
• Sale pending on clear turns.
• Sale pending on clear sides.
• Sale pending on JDM tails.
• Interest in JDM Headlights.
• Sale pending on fog lights.
• Interest in transmission.

This post has been edited by Espo: May 20, 2011 - 2:05 AM

[bizzerk]

I'll take that driver side fender off your hand buddy, I'll pay 70 if you let me have it (not sure if thats the highest bid). Let me know if so i'll pm you my area code for shipping quote, and i'll send money right after.

p.s. wish I had saw this post earlier. I would of cleared you out haha.

This post has been edited by bizzerk: May 20, 2011 - 2:26 PM

[Espo]

I'll take that driver side fender off your hand buddy, I'll pay 70 if you let me have it (not sure if thats the highest bid). Let me know if so i'll pm you my area code for shipping quote, and i'll send money right after.

p.s. wish I had saw this post earlier. I would of cleared you out haha.

There's still plenty of stuff to go. Unfortunately I'm letting both fenders go to the same person, he's buying almost $400 in items from me so I can't do that to him.

Updates:

• Sold engine under plastics. Shifter surround going with these. Pending shipping estimate tomorrow (Saturday).
• Pending sale on head unit/center console.
• Sale pending for fenders, badges, shift knob, rear 1/4 windows w/molding, pass side privacy hinge, and seats. Pending shipping estimate tomorrow (Saturday).
• Sale pending on front bumper.
• Sale pending on clear turns.
• Sold JDM clear sides.
• Sale pending on JDM tails.
• Multiple parties interested in JDM Headlights/possible purchase offer pending shipping estimate.
• Sale pending on fog lights.
• Interest in transmission.

This post has been edited by Espo: May 23, 2011 - 9:26 PM

[JasonTX]

just need your paypal and i'll send payment

[Espo]

@Jason, got your payment. Check your inbox.

Sold a couple items today, updating first post and previous list now:

• Sold engine under plastics. Shifter surround going with these. Shipped out @ 4:30 PM EST
• Sold head unit/center console. Shipped out @ 4:30 PM EST
• Sold fenders, badges, shift knob, rear 1/4 windows w/molding, pass side privacy hinge, and seats. Shipping out Friday, need to have an auto place do the glass work.
• Sale pending on front bumper. Haven't heard from buyer in about a week. New buyer PMed today.
• Interest in Vincent's door sills.
• Clear turns buyer backed out.
• Sale pending on JDM tails.
• Sold JDM Headlights and fogs. Shipped out @ 4:30 PM EST
• Interest in transmission.

Added a few items to the first post that were unphotographed and a couple new ones.

Photographed: Lambo hinges, Vincent's fuel door.

Added: Vincent's Floor Mats (Red Trim)

EDIT@2AM EST: I'm deleting most of the messsages in my PMBox, it's getting quite close to full, I apologize if I haven't responded to you (although I believe I have responded to everyone where it was necessary to do so). If this is the case, please get back to me either in this thread or via another PM.

EDIT@2:45PM EST: Updated list with sales.

EDIT@11:45PM EST: Updated list with shipping confirmations.

This post has been edited by Espo: May 24, 2011 - 10:43 PM

[jordisonjr]

Im looking for the rubber pieces that go inbetween the strut and spring, at the bottom of the spring.
I need them from the front passenger and driver side, if they are in good shape.
Let me know if you still have them, thanks.

[Espo]

Im looking for the rubber pieces that go inbetween the strut and spring, at the bottom of the spring.
I need them from the front passenger and driver side, if they are in good shape.
Let me know if you still have them, thanks.

Mine are not unfortunately, the previous owner equipped 205/55/R16 tires, so all four struts have been dented at that rubber piece due to tire rub. I can take photos if you like, they certainly still work, but they're not pristine.

• Sold fenders, badges, shift knob, rear 1/4 windows w/molding, pass side privacy hinge, and seats. Shipping out Monday, need to have an auto place do the glass work.
• Two buyers interested in front bumper. No bidding in progress.
• Interest in Vincent's door sills.
• Multiple interest in JDM tails.
• Interest in transmission.

P.S. Guys nobody's jumped on Vincent's items? I'm more than willing to make the items with blemishes look like brand new - these things are always HOT items when he puts up a post.

This post has been edited by Espo: May 27, 2011 - 3:39 PM

[jordisonjr]

If its not too much to ask, pitures of the rubbers would be awesome.
But if they are still all installed on the car don't worry about it.

[Espo]

If its not too much to ask, pitures of the rubbers would be awesome.
But if they are still all installed on the car don't worry about it.

Car's on jacks, it won't be an issue. I'll grab pics for you tomorrow.

Sold JDM tails today.

• Sold fenders, badges, shift knob, rear 1/4 windows w/molding, pass side privacy hinge, and seats. Shipping out Monday, need to have an auto place do the glass work.
• Two buyers interested in front bumper. No bidding in progress.
• Interest in Vincent's door sills.
• Sold JDM tails. Shipping Monday.
• Interest in transmission.
• Interest in hydraulic clutch line to transmission. Investigating location of actual part monday.

This post has been edited by Espo: May 29, 2011 - 2:47 PM

[Espo]

BUMP! There are still plenty of good items to go, including Vincent's items, my ENTIRE 7A-FE engine, transmission, and all the body parts listed above!

Update:

• Sold fenders, badges, shift knob, rear 1/4 windows w/molding, pass side privacy hinge, and seats. Currently trying to find an auto glass place that'll respond to me.
• Two buyers interested in front bumper. No bidding in progress.
• Interest in Vincent's door sills.
• Sold JDM tails. Shipped Tuesday.
• Sold aftermarket diamond turns. Shipped Tuesday.
• Interest in transmission.
• Interest in hydraulic clutch line to transmission. Investigating location of actual part.

@Jordison: My phone was low battery yesterday and I didn't have my camera, so I wasn't able to grab pics, I'll do that today.

This post has been edited by Espo: Jun 2, 2011 - 3:40 PM

[RabidTRD]

Let me start by saying, I'm very sorry to hear about your car.

VERY interested in that exhaust. I'm local so I can drive out and pick it up even. I also may be interested in that suspension. That is the exact suspension setup I want on my '94.

Again, I'll drive out there and buy it from you in person for $400.

PMing you now.

[Espo]

All PMs responded to - RabidTRD, check your inbox.

• Sold fenders, badges, shift knob, rear 1/4 windows w/molding, pass side privacy hinge, and seats. Wire saw?
• Buyer interested in front bumper/struts/side skirts.
• Interest in exhaust.

Strut pics (pic #1 is of front driver's side, pass is the same condition):







This post has been edited by Espo: Jun 3, 2011 - 12:15 AM

[Espo]

BUMP!
Whoever PMed me about the struts, I cleared my inbox, please PM me again about them, they're still available. The car will be junked soon, so please contact me immediately, thank you.

• Sold fenders, badges, shift knob, rear 1/4 windows w/molding, pass side privacy hinge, and seats. Wire saw?
• Buyer interested in struts.
• Interest in exhaust. Buyer picking up asap.
• Sold front bumper, rear bumper, side skirts, 7A-FE engine minus intake/exhaust.Buyer picked up/paid today.

This post has been edited by Espo: Jun 5, 2011 - 1:40 PM

[Espo]

Bump again, car has been junked as it's been gutted completely, engine taken - I have the struts/springs out now, the three prong wing from the 96+ models, lambo hinges and all existing parts still available in the first post.

• Sold fenders, badges, shift knob, rear 1/4 windows w/molding, and seats. Packaging and boxing/shipping Monday/Tuesday/Wednesday.
• Sold exhaust. Same buyer interested in springs. Picked up today.

This post has been edited by Espo: Jun 12, 2011 - 7:34 PM

[JasonTX]

any update on my shipping?

[JasonTX]

hey espo

can you confirmn my parts went out last week?

waiting on that stuff to get my car together

-jec

[Espo]

^Anyone wondering, got this guy's stuff out - shipping large items is a hell of a lot harder than I would've thought. He'll confirm this.

In any case, the rest of this stuff is cluttering up my garage and needs to go, I'm now accepting offers on all parts, I want them out out out so I can have a clean workspace again. Leggo!