FS: '94 GT complete partout, EDIT: More Pics Options

[freemansanarchy]

I have a '94 GT I am parting out to pay for school this summer.

The car is completely primered with black leather interior. It does have a body kit but i can work around it. Carpets in good condition, only front seats need repairs, interior panels are black and in good condition.

Engine is in running order and I have all parts in assembly location. I have the transmission but I do not have the input shaft.
The rest of the car's parts are in place. It is a 5-speed, 5sfe

I am selling ALL the parts I can so I won't try to list them all. I will keep this updated as parts go.

I have all 4 headlights with tabs. and taillights are in good shape, and I'll clean it all up before shipping

and BRAND NEW bumper reinforcement bar. I installed it after I parked it and it is in perfect shape.

I do NOT have:
Stock radio
Input shaft




I'm located in Northeast Alabama.




And I found this in my workshop:

It's all fiberglass and prepped to be painted. The primered area is where I form fitted for the turn lights. Fits frame perfectly, I've just never gotten around to installing or painting it.

Feel free to PM or post here. And I will be happy to provide pictures personally and will be posting several very soon.

Thanks

Also, If I'm allowed to do this, I have a system for sale. 2 Memphis 12's and amp. I just need any money I can get for school.

This post has been edited by freemansanarchy: May 4, 2012 - 1:05 PM

[jcbass7]

If it is a liftback/hatchback and there is no rust in the driver side rear quarter panel at the bottom I need this....





As you can see mine is rusted out bad. I need it to about the dimensions I circled and all the way through both the outer quarter panel and further in to the other panel. The second pic helps show it..

Let me know

Thanks!

[SupraKid]

Where are you located?

[Xander_X]

Power antenna operational/available?

[sandusky1977]

I could use the radiator, mine blew up, also, driverside taillight, parcel shelf, steering wheele, ash tray.

I could also use the fuel release lever also

This post has been edited by sandusky1977: May 3, 2012 - 8:10 AM

[qatar11]

PM Sent

[HectortheRican]

pm sent

[Special_Edy]

How close are you to Texas? I need a passenger side fender

[freemansanarchy]

Where are you located?

Northeast Alabama

[freemansanarchy]

I could use the radiator, mine blew up, also, driverside taillight, parcel shelf, steering wheele, ash tray.

I could also use the fuel release lever also

Radiators got miles on it, but is in good shape
I am only gonna sell the tailights together
I don't think I have the shelf
I've included a picture of the steering wheel in the first post.
And I have ash tray and lever

PM me for details

[benzo]

do you have fog light BRACKETS for sale? shipped to 93722??

[superman8589]

Motor and tranny how much. And zip code 33612

Oh and driver fender

[Redmann813]

how many miles? got shift cables? price shipped to77377?

[Box]

Where exactly in northeast Alabama? I'm in Springville, AL. What's wrong with the front seats exactly, possibly could post/send pictures? That and I need the plastic dash piece that surrounds the radio and a/c. If you have the hatch carpet I'm also interested in it. Also the front strut bar if you have that. Long shot, but if you have the ST202 fog lights and rear strut bar would also be interested in that.

This post has been edited by Box: May 3, 2012 - 5:34 PM

[freemansanarchy]

how many miles? got shift cables? price shipped to77377?

149xxx on car, yes I have cables. Flat rate.

[Redmann813]

how many miles? got shift cables? price shipped to77377?

149xxx on car, yes I have cables. Flat rate.

alright so how much

[freemansanarchy]

Where exactly in northeast Alabama? I'm in Springville, AL. What's wrong with the front seats exactly, possibly could post/send pictures? That and I need the plastic dash piece that surrounds the radio and a/c. If you have the hatch carpet I'm also interested in it. Also the front strut bar if you have that. Long shot, but if you have the ST202 fog lights and rear strut bar would also be interested in that.

Ah, cool, I'm in Scottsboro. The seats would need to have squares replaced. I'll provide pictures as soon as I can take some.
I had to shave some of the surround to fit my radio, but overall it's in good condition. And the hatch carpet is in good shape.
No fog lights, sorry. And no good struts.

[Box]

Ah alright. Very interested in seats, just a matter of how bad it is. I meant the strut bar/brace that goes between the strut towers. Looks like this:
That's what happened to my radio surround piece, still interested in the hatch carpet though.

This post has been edited by Box: May 3, 2012 - 8:09 PM

[Hardtop2]

shift knob shipped to 77049?

[scotttyb]

PM'd about the high beam headlights.

[freemansanarchy]

Ah alright. Very interested in seats, just a matter of how bad it is. I meant the strut bar/brace that goes between the strut towers. Looks like this:
That's what happened to my radio surround piece, still interested in the hatch carpet though.

I don't have those, sorry.
I'll take a pic of the seats for you right after work.
Yeah, the radio thing is a pain, sorry I couldn't help with that.
I'd Prefer local pick up if you can.

how many miles? got shift cables? price shipped to77377?

149xxx on car, yes I have cables. Flat rate.

alright so how much

$45 you ship.

If it is a liftback/hatchback and there is no rust in the driver side rear quarter panel at the bottom I need this....





As you can see mine is rusted out bad. I need it to about the dimensions I circled and all the way through both the outer quarter panel and further in to the other panel. The second pic helps show it..

Let me know

Thanks!

I just got a chance to get up under the car and I can't help you there man, I guess that's just one of those places that has a habit of rusting out.

[freemansanarchy]

shift knob shipped to 77049?

Shipping would be flat rate $4. Shoot me a price.

[Box]

That's ok. Alright, local pick up would be good. Look forward to the pics.

[mentat]

Looking for a gas tank and fuel pump sent to canada, let me know what you would let it go for.

Thanks.

[freemansanarchy]

Looking for a gas tank and fuel pump sent to canada, let me know what you would let it go for.

Thanks.

I definitely have both, but I'm not sure how I'd ship it to Canada.



This post has been edited by freemansanarchy: May 5, 2012 - 9:13 AM

[freemansanarchy]

I really need this stuff gone.

Headlights: $120 plus shipping.

I also still have both tailights, and heck, I'd black them out for free before shipping if someone wanted that. Base and clear.

I haven't set up a paypal yet, but just as soon as I do I'll start shipping.

Just get with me.
Everything must go

This post has been edited by freemansanarchy: May 5, 2012 - 9:17 AM

[seanb]

I really need this stuff gone.

Everything must go

Looking for the stock front license plate bracket, shipped to 60002. Thanks.

[freemansanarchy]

I really need this stuff gone.

Everything must go

Looking for the stock front license plate bracket, shipped to 60002. Thanks.

Sorry, I didn't get that with the car.

[celica-supra]

How about the shift bezel and both front inner fender liners shipped to 24630 thanks.

[dliverance]

Do you have the seal for the drivers side window? If so, how much?

Also how much for the drivers tail shipped to 33021?

Also also....More pics of bumper?

[freemansanarchy]

Do you have the seal for the drivers side window? If so, how much?

Also how much for the drivers tail shipped to 33021?

Also also....More pics of bumper?

Do you mean the rear driver window?
I am only selling the lights as a set, sorry.
and aftermarket bumper or the one on the car?


I appreciate all the replies. Exam week is over, so when anytime it's not raining I'll be working on getting anyone what they need.
Thanks

How about the shift bezel and both front inner fender liners shipped to 24630 thanks.

I assume you mean the plastic surround, do you want the boot too?
I am missing the drivers side liner I believe.

[dliverance]

The gasket that goes around the top and side of the drivers window. Its attached to the car but you can see it when you open the door.

[zfjohnson07]

radiator and ac condensor? brake cylinder plastic holder

[celica-supra]

if the boot is in pretty good shape I'll take it as well, what condition is the passenger side liner?

[Syaoran]

I need the headlight stalk knob. I also need the armrest. Finally, how much do you want for the lowbeams?

[BlackWidow]

Do you have aircondition?

i need the cooler-box under the dashbord. its the middle with the radiator inside.
And what does it cost to ship it toe the Netherlands, Europe?

Greetingz Christian

[mindkiller]

Driver side quarter window to 95831

[bluecrush09]

I am interested in the black surround for the radio opening. Runs from top of the dash to the bottom. Do you still have it ? Also it looked like you had a dash kit in yours for the single DIN radio. Is it still in good shape? Im fixing up my first toyota for my daughter. Thanks

I have a '94 GT I am parting out to pay for school this summer.

The car is completely primered with black leather interior. It does have a body kit but i can work around it. Carpets in good condition, only front seats need repairs, interior panels are black and in good condition.

Engine is in running order and I have all parts in assembly location. I have the transmission but I do not have the input shaft.
The rest of the car's parts are in place. It is a 5-speed, 5sfe

I am selling ALL the parts I can so I won't try to list them all. I will keep this updated as parts go.

I have all 4 headlights with tabs. and taillights are in good shape, and I'll clean it all up before shipping

and BRAND NEW bumper reinforcement bar. I installed it after I parked it and it is in perfect shape.

I do NOT have:
Stock radio
Input shaft




I'm located in Northeast Alabama.




And I found this in my workshop:

It's all fiberglass and prepped to be painted. The primered area is where I form fitted for the turn lights. Fits frame perfectly, I've just never gotten around to installing or painting it.

Feel free to PM or post here. And I will be happy to provide pictures personally and will be posting several very soon.

Thanks

Also, If I'm allowed to do this, I have a system for sale. 2 Memphis 12's and amp. I just need any money I can get for school.

[CAcelica29]

side skirts available?

[Syaoran]

Never answered in relation to the headlight stalk.

Im interested in the bumper. More pics?

[ToniCoonce]

Do you still have the bumper and lights?? And if so how much are you asking for these items? And maybe driver side fender? My car was in an accident and the other driver had no insurance so I am fixing out of pocket. Please let me know.

I am interested in the black surround for the radio opening. Runs from top of the dash to the bottom. Do you still have it ? Also it looked like you had a dash kit in yours for the single DIN radio. Is it still in good shape? Im fixing up my first toyota for my daughter. Thanks

I have a '94 GT I am parting out to pay for school this summer.

The car is completely primered with black leather interior. It does have a body kit but i can work around it. Carpets in good condition, only front seats need repairs, interior panels are black and in good condition.

Engine is in running order and I have all parts in assembly location. I have the transmission but I do not have the input shaft.
The rest of the car's parts are in place. It is a 5-speed, 5sfe

I am selling ALL the parts I can so I won't try to list them all. I will keep this updated as parts go.

I have all 4 headlights with tabs. and taillights are in good shape, and I'll clean it all up before shipping

and BRAND NEW bumper reinforcement bar. I installed it after I parked it and it is in perfect shape.

I do NOT have:
Stock radio
Input shaft




I'm located in Northeast Alabama.




And I found this in my workshop:

It's all fiberglass and prepped to be painted. The primered area is where I form fitted for the turn lights. Fits frame perfectly, I've just never gotten around to installing or painting it.

Feel free to PM or post here. And I will be happy to provide pictures personally and will be posting several very soon.

Thanks

Also, If I'm allowed to do this, I have a system for sale. 2 Memphis 12's and amp. I just need any money I can get for school.

[MrParker]

I'm currently looking for both rear brakes brackets & the 5sfe oil pump. PM me if you still got those please.

[sfampede]

How much for the antenna base and mast? Shipped to 37660

[B1indreap3r]

I am wondering on the whole Chassis itself. I don't need like the seats, engine, fenders or anything... I have all. It's just I am from Michigan and my Rear Fender wells, bottom of my doors and Rocker Panels are starting to rust.. the previous owner tried fixing it with Filler... But I'm just interested in getting a new chassis for it and just swapping everything over myself. So if you could message me and send me more information on it. I could either plan a weekend to drive down with a trailer or something to haul it. Or set up something for shipping. Are there any locations of rust? if at all? Also, I work for a toyota dealership, so I get 90% of parts through there anyways. Just having the common Problem of rust being from the north and what not. Let me know if it's something youd be interested in or not.

[zfjohnson07]

i need the passenger control arm

[CAcelica29]

any updates on what you do or dont have left?

[6gcpr]

You have the alternator?

[dudeofchaos]

How much for the rear hand brake pads (if they still have some life left on them)?

[ocdcelli]

Hey do you have a stock rim available thanks.-Zach

[xMika]

Do you have this wiring harness connecting the blower fan and air-con controller ?



Uploaded with ImageShack.us

[b22ri22an]

do you still have the plastic surround for the stereo,vents, and climate controls if so pm me with shipped price to 33897 new project i'm gonna be working on to make a tablet dock need one i can cut apart while keeping the one i have in the dash

[CAcelica29]

willing to sell just the driver side lights??? 93063

[BeachBum12]

how about the drivers side hub assembly sent to 32148?

[Syaoran]

And I found this in my workshop:

It's all fiberglass and prepped to be painted. The primered area is where I form fitted for the turn lights. Fits frame perfectly, I've just never gotten around to installing or painting it.

Do you still have this? PM sent.

[83841]

Gas door lid? and Rear Cargo Cover? Ashtray? Please let me know how much to ship to 94803

[Box]

This guy hasn't responded in months, obviously isn't selling anymore. Was really wanting those seats too... Oh well.

[jing123]

looking to get the privacy cover if its still available?

[marshall22]

Do you still have the tail lights? If you do how much?

[WhipCreamCelica]

what is that front bumper called? looks like it would look good, i hate how the stock bumpers go up, does this bumper stay evenly low with the bottom of the fenders?

[HectortheRican]

Do you still have that shift knob? If so, can I get a better picture of it?

P.S. Your inbox is full.

[trd_420]

I have a '94 GT I am parting out to pay for school this summer.

The car is completely primered with black leather interior. It does have a body kit but i can work around it. Carpets in good condition, only front seats need repairs, interior panels are black and in good condition.

Engine is in running order and I have all parts in assembly location. I have the transmission but I do not have the input shaft.
The rest of the car's parts are in place. It is a 5-speed, 5sfe

I am selling ALL the parts I can so I won't try to list them all. I will keep this updated as parts go.

I have all 4 headlights with tabs. and taillights are in good shape, and I'll clean it all up before shipping

and BRAND NEW bumper reinforcement bar. I installed it after I parked it and it is in perfect shape.

I do NOT have:
Stock radio
Input shaft




I'm located in Northeast Alabama.




And I found this in my workshop:

It's all fiberglass and prepped to be painted. The primered area is where I form fitted for the turn lights. Fits frame perfectly, I've just never gotten around to installing or painting it.

Feel free to PM or post here. And I will be happy to provide pictures personally and will be posting several very soon.

Thanks

Also, If I'm allowed to do this, I have a system for sale. 2 Memphis 12's and amp. I just need any money I can get for school.

I need a window hinge that comes with the moto of the car for the pasanger side mine is busted intrested also on the whole abs assembly drivers side front how much and shipped to zipcode 91605

[chacha]

I need the driver side rear quarter panel window

[garin]

driver side low beam. price with shipping?

[ILoveMySilly97]

Do you have the connector to the ECT sensor. The One that sends the signal to the dash gauge one.

[ocdcelli]

Hey Interested in the bumper shoot me a reply!
Also couple other things let me know.
_Zach