Julian's progress/build thread. Options

[Julian_Navia]

My name is Julian. I've been on 6gc for about a year and I think its finally time to start a build thread.

Basically, my brother bought this car used way back when he was in high school. When he owned the car he had dream's of converting it to a GT-Four.
Since then he bought a new car and lost interest in the Celica and was going to sell it, but one day he asked if I wanted it and I said sure.

When I first got the keys the car had been sitting in my driveway for about 3 years. It needed new breaks and wouldn't start due to an electrical problem with the fuel pump. But I finally got her working!



After that the car stayed at home for another month till I got my license. In that time I changed the oil and all the fluids, replaced the front driver side fender, the front axles, and the clutch hydraulics. Then I finally got my license and she was on the road.







Through the weeks I started to grow a larger attachment to the car, but it still felt like I was driving my brothers car so I decided to start fixing more things.
As the weeks went by I had started replacing warn interior bits and pieces as I found them. I replaced the torn shift boot, head unit, a few interior trim pieces, and ordered a kit from Spree to make my dash and climate control blue and the interior all LED.









I spent the next couple of months doing small things here and there but nothing really major until a a few weeks ago I bought some new 7th gen GT-S wheels.



Along with the wheels came some HIDs I bought from a local tuning shop and it all went in that weekend.



I plan to swap a 3sgte into the car but I don't see that happening anytime soon, but I'm currently working on ordering all my suspension parts and getting a rust spot in the rear quarter panel fixed up so then I can maybe have the car re painted in the coming months.

This post has been edited by Julian_Navia: Nov 27, 2013 - 9:04 AM

[Tigawoods]

awesome! a nearby 6gc!

[Julian_Navia]

awesome! a nearby 6gc!

Oh man! I didn't even realize you were so close! Awesome!

[richee3]

Was your brother on the forums? And what's the story on the red MR2 at the car wash?

[Julian_Navia]

Was your brother on the forums? And what's the story on the red MR2 at the car wash?

He told me once that he had an account on here but I'm not sure what the username was. And the red MR2 is our friend Eric's he usually comes with us to the carwash

[Julian_Navia]

Just swapped my filter out for an AEM dryflow cause the filter that came on the car just had to go. Also ordered a header yesterday and waiting for it to arrive so I can put it on



This post has been edited by Julian_Navia: Feb 19, 2013 - 10:52 PM

[Tigawoods]

the dry-flows are a great intake. good choice. much easier maintenance as compared to the filters needing oil

[Julian_Navia]

Yep I kept seeing them around and finally decided to try one so far I love it!

[rave2n]

So you sir will succeed in where your brother fell short?

I like a story with a twist =P

This post has been edited by rave2n: Nov 20, 2012 - 4:38 PM

[Julian_Navia]

So you sir will succeed in where your brother fell short?

I like a story with a twist =P

Yep that's the plan! And I don't plan on quitting either

[Julian_Navia]

Small update just got these in:



Gonna start making my gaskets tomorrow and hopefully they'll be on this weekend if its not too cold out.

Also thanks smkr3w for the badges! Can't wait to have them on!

[Julian_Navia]

I know I haven't updated this in a while but I've finally decided after weeks of thinking that it may be easier, cheaper, and possibly better to swap a BEAMS 3S-GE red top in instead of getting a half cut. What do you guys think? I'm already pretty set on the idea really but I would love to hear what others have to say as far as their experiences with either swap.

[Tigawoods]

im all for N/A!
and isnt that header only for 3sge anyways?

[Julian_Navia]

im all for N/A!
and isnt that header only for 3sge anyways?

I actually bought it for the 7afe. I'm not so sure if it would fit a 3s but I wouldn't think so. I have alot or research to do lol

[Tigawoods]

i know that some of the rare jdm headers for the 3SGE are fab'd in that style.
could possibly still fit on the 7A! Have you installed it yet?

[Julian_Navia]

i know that some of the rare jdm headers for the 3SGE are fab'd in that style.
could possibly still fit on the 7A! Have you installed it yet?

I haven't gotten to putting it on yet because it's so cold out right now and I don't have access to a garage as soon as it gets a bit nicer out its going on I just need to order a new o2 sensor replacement cause mine went bad

[BonzaiCelica]

im all for N/A!
and isnt that header only for 3sge anyways?

dumb ebay sellers don't even know what they are selling to the people and are loosing sales to usa members. its a 7afe header no doubt

[Julian_Navia]

im all for N/A!
and isnt that header only for 3sge anyways?

dumb ebay sellers don't even know what they are selling to the people and are loosing sales to usa members. its a 7afe header no doubt

I actually bought it on here but I do agree that the eBay sellers need to to clean up their act a bit. Seen plenty of cases where someone didn't get what they thought they would

[Tigawoods]

How's the foot healing? Was it the clutch or gas foot haha

[Julian_Navia]

How's the foot healing? Was it the clutch or gas foot haha

It was the clutch foot lol but it actually healed pretty fast I've been on the road again for a little while

[Julian_Navia]

Fixed my rust spot.









It got dark so I wasn't really able to get a picture of the finished product.

[Julian_Navia]

Today I spent most of the day taking these one way bolts off with this 11mm socket.


Now who can guess what these bolts came off of?

[Tigawoods]

nothing ive ever touched on my car, thats for sure

[Julian_Navia]

What's different

[RabidTRD]

There is a blue tarp on one of the bikes? Lol

Nice risers!

[Julian_Navia]

Thanks! Lol the blue tarp is actually a scooter some guy gave us cause it was broken

[Julian_Navia]

Today I got bored and started taking pics lol. Well here's what it looks like right now.











I need coilovers in my life~

[Tigawoods]

is that a store that just sells honeybaked ham?

[Julian_Navia]

is that a store that just sells honeybaked ham?

LOL I asked my friend the exact same thing and he said yes

[playr158]

they also have sandwiches and café stuff depending on location.

You should come down to the VA side and go to great falls cars and coffee some time!

[Julian_Navia]

they also have sandwiches and café stuff depending on location.

You should come down to the VA side and go to great falls cars and coffee some time!

I was there last Saturday! I was gonna post on here if anyone around wanted to meet up but by the time I found out I was going It was way too short notice. I might be going up there again though next Saturday or the Saturday after though

[Tigawoods]

well thats a bummer, I wont be able to make that CnC until october.

there are some weekly car meets at night throughout MD though, going to check out a few of those. Know of any around Bethesda/Rockville?

[Julian_Navia]

well thats a bummer, I wont be able to make that CnC until october.

there are some weekly car meets at night throughout MD though, going to check out a few of those. Know of any around Bethesda/Rockville?

Ill still be goin in October lol. Just let me know. And yeah a bunch. If you have a FB look up a page called MoCo Meets

[Tigawoods]

done

[Julian_Navia]

done

Mind you, I've never actually been. lol.

[playr158]

I haven't gone in a few weeks but might be able to make this saturday.
I hunt just down the street from CnC, but normally won't come out of the woods till CnC is over.

But in the next two saturdays I'm probably down for CnC around 7am

[Julian_Navia]

I haven't gone in a few weeks but might be able to make this saturday.
I hunt just down the street from CnC, but normally won't come out of the woods till CnC is over.

But in the next two saturdays I'm probably down for CnC around 7am

Sounds good just let me know

[Julian_Navia]

Removed my bumper.


And my crash bar.


And headlights.


And put those on.


Photos just don't do it justice.

[Julian_Navia]

[njccmd2002]

So whats the story with the bolts

[Julian_Navia]

So whats the story with the bolts

Toyota used one way bolts to keep the riser blocks onto the spoiler :|

This post has been edited by Julian_Navia: Nov 23, 2013 - 3:07 PM

[Julian_Navia]

The facelift bumper I got from samboo


Gonna try to have it painted when I get back in a few weeks

[Julian_Navia]

RIP Apexi N1

[Julian_Navia]

So my clutch was slipping and I assumed the Exedy clutch ate the flywheel but upon closer inspection things were a bit worse..







ANYWAY, I replaced everything with a flywheel and clutch kit from some company called Perfection. Car works again, can't complain.