6G Celicas Forums

Welcome Guest ( Log In | Register )

> FS: 95 Celica GT Part Out, needs to be gone buy June 1, 2013
post May 8, 2013 - 1:37 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




Update: 6/22/2013

Finally got rid of the car. I will clean the original post sometime and post the left over stuff

____________________________________________________________
______

Update: 6/6/2013

I still have the Celi, landlord is happy about it rolleyes.gif but I don't care no more..

Updated the parts that are sold below, more parts listed. Excuse the ugly pics, I can take better pics upon request.



Steering wheel - someone asked for it but I cannot remember who


Steering wheel Air Bag


Turn stalk -sold pending funds and washer stalk


Passenger side air bag


Cruise control module


Engine control module/ECU


Driver and Passenger side mirrors
No pic yet




_________________________________________________

Update: 5/21/2013

These items are up for sale again.

Seat Belts $50 each


A set of 25th Anniversary Floor Mats $20 sold

USDM pair of tail lights no cracks


Crash bar and brackets $40+shipping


Rear View Mirror $10+shipping sold

Instrument Panel Plastic $10+shipping


Shifter Plastic Trim $15+shipping sold pending funds


Steering Column Plastic Trim $10+shipping


Ignition Plastic Trim $5+shipping


Cruise Control Actuator $70+shipping including the bracket - sold pending funds


Climate Control Unit $60+shipping sold


Gauge Cluster


Passenger Side Low Beam $45+shipping No broken tabs




______________________________________

Update: 5/14/2013

These are items that are boxed and ready to be shipped. Buyers will be pm'ed for confirmation. If I do not get a response by the 16th, I will move on to the next buyer. The shipping weight is listed below so if the transaction falls through, you can calculate shipping rates from 94538.

Driver Side High Beam - shipping weight 6lbs - gts4>aldizzurp>Suprakid

Tail Lights - shipping weight 7lbs - benny

Passenger Side Low Beams - shipping weight 6lbs

Thanks
______________________________________

Update: 5/14/2013

Will finalize a list later for items that are taken of and ready to be delivered/shipped. I will package them and get a shipping quote. Thanks



______________________________________

Update: 5/10/2013

I have received a number of interest on parts and the whole car. I'd like to give priority for those who are interested in taking the whole car as is however, there are some items that have been paid for already.

Here are some items that are taken off the car and will be delivered this weekend:

Spoiler
Rear Trunk plastic
Spare tire cardboard cover
Center Console Plastic
Hatch Cover
Exhaust manifold cover

For those who are interested in buying the remainder of the car, Here are the parts that are taken off but will be included

Tail Lights
Head Lights

Parts that have dibs/interest:

Wiring Harness
Starter
Speed Sensor
ECU
Passenger side fender

So if you are serious in buying the whole car, please tell me

  • Tell me when you are pick it up?
  • How are you going to transport the car?
  • Are you willing to put up a deposit before picking up the car for the amount of $300? - I know it sounds high but I hope it is understandable that if I don't have a deposit from a prospective buyer and he decides to back out on the date of pick up, I will end up running out of time by June 1st and of all that time wasted, I could have helped other members get parts they needed.


I am giving folks that are interested in buying the whole car until May 15.

PM's replied

Thanks
________________________________

Hey Guys,

I need to get rid of my 95 Celica GT by June 1, 2013. This is a great parts car and I am looking to sell some parts of it before it goes to the Junk Yard. If anybody is interested in taking the whole car, I will sell it to you for $500. It has suspension damage on the front and rear driver side.

I have started parting out some interior parts and some parts in the engine bay. Please let me know what you need so I can take it off before it goes to the scrap yard. See the pictures below. I can deliver items in california from Santa Clara county to San Diego County via I5.

Send me a pm or msg me thru facebook if interested, I respond faster on FB. Thanks

nics

Link to my previous thread http://www.6gc.net/forums/index.php?showtopic=88867



















This post has been edited by nics: Jun 22, 2013 - 7:37 PM


--------------------
God made man....
Everything else...
Made in China

4 Pages V   1 2 3 > »   
Start new topic
Replies (1 - 78)
post May 8, 2013 - 9:20 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




Sold items



--------------------
God made man....
Everything else...
Made in China

post May 8, 2013 - 9:49 PM
+Quote Post
1994Celica



Enthusiast
*****
Joined Aug 5, '09
From West Texas, USA
Currently Offline

Reputation: 20 (100%)




Would you be willing to sell the wheels and tires off of it?


--------------------
JDM Part King

post May 8, 2013 - 11:07 PM
+Quote Post
meshell6gc

Enthusiast

Joined Dec 4, '12
From America10
Currently Offline

Reputation: 0 (0%)




Hey I am interested in the passanger fender and possibly a couple other parts, I'm in San Diego area if you wanted to meet up.
Thanks!
-Zach Pm me or text 760 975 7286
post May 9, 2013 - 12:15 AM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (1994Celica @ May 8, 2013 - 7:49 PM) *
Would you be willing to sell the wheels and tires off of it?


Only 2 wheels are good, the driver side isnt. I dont know if the junkyard folks can pick it up without wheels.

QUOTE (meshell6gc @ May 8, 2013 - 9:07 PM) *
Hey I am interested in the passanger fender and possibly a couple other parts, I'm in San Diego area if you wanted to meet up.
Thanks!
-Zach Pm me or text 760 975 7286


Let me know what other parts you need. Short notice so i won't be able to take the fender apart since im going to SD on friday. Next trip will be Memorial day weekend.


--------------------
God made man....
Everything else...
Made in China

post May 9, 2013 - 2:06 AM
+Quote Post
CAcelica29

Enthusiast
**
Joined Aug 26, '11
From ventura, ca
Currently Offline

Reputation: 10 (100%)




would u be able to get me a price on the winshield wiper control stalk? i broke mine and a new one is a fortune!
post May 9, 2013 - 2:19 AM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (CAcelica29 @ May 9, 2013 - 12:06 AM) *
would u be able to get me a price on the winshield wiper control stalk? i broke mine and a new one is a fortune!


Is this where the wiper blades are attached?


--------------------
God made man....
Everything else...
Made in China

post May 9, 2013 - 8:38 AM
+Quote Post
chaostheory

Enthusiast

Joined Oct 1, '11
From mass
Currently Offline

Reputation: 1 (100%)




is the alternator belt tensioner available/not frozen like mine? could use a shift knob and boot as well - pm'd
post May 9, 2013 - 8:58 AM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (chaostheory @ May 9, 2013 - 6:38 AM) *
is the alternator belt tensioner available/not frozen like mine? could use a shift knob and boot as well - pm'd


Shift knob is available. Boot is torn. Let me know.


--------------------
God made man....
Everything else...
Made in China

post May 9, 2013 - 4:15 PM
+Quote Post
shai



Enthusiast
*
Joined Aug 19, '09
From westminster
Currently Offline

Reputation: 0 (0%)




PM'D
post May 10, 2013 - 12:42 AM
+Quote Post
meshell6gc

Enthusiast

Joined Dec 4, '12
From America10
Currently Offline

Reputation: 0 (0%)




Ya I'll take the fender passenger side. Ill make a quick list but deft save that for me if you can thanks! I may be I terested in steering column to possibly I dot know my cars is tweaked. Are there spacers on the car? Ill stay in touch thanks man!
post May 10, 2013 - 2:47 AM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (meshell6gc @ May 9, 2013 - 10:42 PM) *
Ya I'll take the fender passenger side. Ill make a quick list but deft save that for me if you can thanks! I may be I terested in steering column to possibly I dot know my cars is tweaked. Are there spacers on the car? Ill stay in touch thanks man!


Original post updated, will hold off on the part out until the 15th. Thanks


--------------------
God made man....
Everything else...
Made in China

post May 12, 2013 - 9:37 AM
+Quote Post
gts4

Enthusiast
*
Joined Dec 20, '11
From gta
Currently Offline

Reputation: 0 (0%)




Hey. I need a driver's side high-beam light (the whole plastic housing and bulb). I also want both doors, front bumper, and your right-rear quarter panel. Please PM me with pricing.
post May 12, 2013 - 7:36 PM
+Quote Post
SwissFerdi

Enthusiast
*****
Joined Jun 18, '09
From Orlando
Currently Offline

Reputation: 8 (100%)




Would you be willing to dig for the shift cable gasket?


--------------------
'97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE
post May 13, 2013 - 11:00 AM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)





QUOTE (SwissFerdi @ May 12, 2013 - 5:36 PM) *
Would you be willing to dig for the shift cable gasket?


Is it the same for auto's and manual?


--------------------
God made man....
Everything else...
Made in China

post May 13, 2013 - 11:21 AM
+Quote Post
mkernz22



Enthusiast
*****
Joined May 10, '10
From MA
Currently Offline

Reputation: 37 (100%)




QUOTE (nics @ May 13, 2013 - 12:00 PM) *
QUOTE (SwissFerdi @ May 12, 2013 - 5:36 PM) *
Would you be willing to dig for the shift cable gasket?


Is it the same for auto's and manual?


nope. one has one hole, the other has two.
post May 13, 2013 - 1:32 PM
+Quote Post
Syaoran



Enthusiast
*****
Joined Jan 4, '12
From US
Currently Offline

Reputation: 6 (100%)




was the gauge cluster working perfectly? If so, how much for it? pm if possible, thanks


--------------------
1993 Celica GT Coupe - sold
1994 Celica GT Liftback
post May 13, 2013 - 2:29 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (gts4 @ May 12, 2013 - 7:37 AM) *
Hey. I need a driver's side high-beam light (the whole plastic housing and bulb). I also want both doors, front bumper, and your right-rear quarter panel. Please PM me with pricing.



QUOTE (Syaoran @ May 13, 2013 - 11:32 AM) *
was the gauge cluster working perfectly? If so, how much for it? pm if possible, thanks


PM Sent


--------------------
God made man....
Everything else...
Made in China

post May 13, 2013 - 10:21 PM
+Quote Post
chacha

Enthusiast
*****
Joined Dec 29, '05
From So-Cal
Currently Offline

Reputation: 12 (100%)




line that connects to the master cylinder clutch to the slave....the whole line...93727 or probably pick up
post May 14, 2013 - 1:03 AM
+Quote Post
ecks9t

Enthusiast
*
Joined Sep 23, '10
From Irvine, CA
Currently Offline

Reputation: 3 (100%)




how much would you ask for the passenger side seatbelt assembly?
post May 14, 2013 - 3:18 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (chacha @ May 13, 2013 - 8:21 PM) *
line that connects to the master cylinder clutch to the slave....the whole line...93727 or probably pick up


I have to check on how to take that off.


QUOTE (ecks9t @ May 13, 2013 - 11:03 PM) *
how much would you ask for the passenger side seatbelt assembly?


Will give you an update on that later today.

Original Post updated


--------------------
God made man....
Everything else...
Made in China

post May 14, 2013 - 4:47 PM
+Quote Post
SwissFerdi

Enthusiast
*****
Joined Jun 18, '09
From Orlando
Currently Offline

Reputation: 8 (100%)




What Mike said, the frame for the rubber is the same, but the gasket piece directly around the cables is unique to the manual. I am going by the assumption that you have the interior apart, so it's not that hard to get to. Underneath the car then are four nuts for the exhaust shield and then three bolts for the other side of the gasket. It took me about ten minutes to remove from another car.

Please, and thank you.

This post has been edited by SwissFerdi: May 14, 2013 - 4:48 PM


--------------------
'97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE
post May 14, 2013 - 5:07 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (SwissFerdi @ May 14, 2013 - 2:47 PM) *
What Mike said, the frame for the rubber is the same, but the gasket piece directly around the cables is unique to the manual. I am going by the assumption that you have the interior apart, so it's not that hard to get to. Underneath the car then are four nuts for the exhaust shield and then three bolts for the other side of the gasket. It took me about ten minutes to remove from another car.

Please, and thank you.


The dash is mostly intact still. I will try to get that for you then. Thanks


--------------------
God made man....
Everything else...
Made in China

post May 15, 2013 - 12:12 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




Orig post edited


--------------------
God made man....
Everything else...
Made in China

post May 15, 2013 - 1:09 PM
+Quote Post
PaukST



Enthusiast
*
Joined Mar 15, '12
From Wrightstown, NJ
Currently Offline

Reputation: 6 (100%)




How much would you like for the passenger side window and lock control panel (assuming it's not already taken, and all the tabs are intact)? A pic of mine so you know what piece I'm talking about.


This post has been edited by PaukST: May 15, 2013 - 1:17 PM


--------------------
1989 Celica ST Automatic "King Cobra" -- 2005-2006
1994 Celica ST 5-speed "King Cobra II" -- 2011-????
post May 15, 2013 - 1:59 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (PaukST @ May 15, 2013 - 11:09 AM) *
How much would you like for the passenger side window and lock control panel (assuming it's not already taken, and all the tabs are intact)? A pic of mine so you know what piece I'm talking about.


PM sent


--------------------
God made man....
Everything else...
Made in China

post May 15, 2013 - 9:37 PM
+Quote Post
1994Celica



Enthusiast
*****
Joined Aug 5, '09
From West Texas, USA
Currently Offline

Reputation: 20 (100%)




Is the fuel/gas door in good shape?


--------------------
JDM Part King

post May 15, 2013 - 9:54 PM
+Quote Post
jaxtheax

Enthusiast

Joined Mar 25, '13
From Sherman Oaks,CA
Currently Offline

Reputation: 0 (0%)




How much do you want for the trim pieces around the radio and gear shift?
post May 15, 2013 - 10:54 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (1994Celica @ May 15, 2013 - 7:37 PM) *
Is the fuel/gas door in good shape?


Yes sir, i can take a pic tom.

QUOTE (jaxtheax @ May 15, 2013 - 7:54 PM) *
How much do you want for the trim pieces around the radio and gear shift?


The one around the radio has been sold. The gear shift trim would be $15 + shipping.


--------------------
God made man....
Everything else...
Made in China

post May 15, 2013 - 11:15 PM
+Quote Post
1994Celica



Enthusiast
*****
Joined Aug 5, '09
From West Texas, USA
Currently Offline

Reputation: 20 (100%)




QUOTE (nics @ May 15, 2013 - 11:54 PM) *
QUOTE (1994Celica @ May 15, 2013 - 7:37 PM) *
Is the fuel/gas door in good shape?


Yes sir, i can take a pic tom.



Sounds good. how much do you want with shipping? My zip is 79424.


--------------------
JDM Part King

post May 16, 2013 - 1:53 AM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (1994Celica @ May 15, 2013 - 9:15 PM) *
QUOTE (nics @ May 15, 2013 - 11:54 PM) *
QUOTE (1994Celica @ May 15, 2013 - 7:37 PM) *
Is the fuel/gas door in good shape?


Yes sir, i can take a pic tom.



Sounds good. how much do you want with shipping? My zip is 79424.


will calculate and get back at you. Thanks


--------------------
God made man....
Everything else...
Made in China

post May 22, 2013 - 2:33 AM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




Bump! Update on original post


--------------------
God made man....
Everything else...
Made in China

post May 22, 2013 - 7:54 AM
+Quote Post
SwissFerdi

Enthusiast
*****
Joined Jun 18, '09
From Orlando
Currently Offline

Reputation: 8 (100%)




QUOTE (nics @ May 14, 2013 - 6:07 PM) *
The dash is mostly intact still. I will try to get that for you then. Thanks


A friendly bump for this.


--------------------
'97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE
post May 22, 2013 - 12:29 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (SwissFerdi @ May 22, 2013 - 5:54 AM) *
QUOTE (nics @ May 14, 2013 - 6:07 PM) *
The dash is mostly intact still. I will try to get that for you then. Thanks


A friendly bump for this.


Thanks Ferdi, I had time to take apart the dash. I will look into your gasket!


--------------------
God made man....
Everything else...
Made in China

post May 22, 2013 - 3:53 PM
+Quote Post
PaukST



Enthusiast
*
Joined Mar 15, '12
From Wrightstown, NJ
Currently Offline

Reputation: 6 (100%)




Got the window/lock control panel today, it's in great shape! Thanks a bunch!

I'm also interested in a bunch of other pieces, that I didn't think of before...

1) the shifter plastic trim (does it have all/most of the tabs for holding the shift boot?)
2) the short cable that goes from the rear hatch latch mechanism to the rear hatch lock
3) the aim-able passenger side climate control/blower vent closest to the door (if it still has most of the tabs to hold it in place)
4) the driver side mirror
5) the turn signal/headlight switch
6) the windshield sprayer nozzles (assuming they're not clogged)
7) the entire hood latch mechanism (the handle thing under the dash, the cable from there to the latch, the latch mechanism itself, and the loop on the underside of the hood that it hooks onto, and all the bolts/screws to go with it)


I'm also trying to get the inner fender well plastics, but they'd probably be way expensive to ship due to their size. If they won't be super expensive to ship I'd love a price on those as well. I wish I'd gotten to your thread sooner - I'm trying to get myself that rear hatch cover as well, but someone beat me to it tongue.gif


--------------------
1989 Celica ST Automatic "King Cobra" -- 2005-2006
1994 Celica ST 5-speed "King Cobra II" -- 2011-????
post May 22, 2013 - 4:13 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (PaukST @ May 22, 2013 - 1:53 PM) *
Got the window/lock control panel today, it's in great shape! Thanks a bunch!

I'm also interested in a bunch of other pieces, that I didn't think of before...

1) the shifter plastic trim (does it have all/most of the tabs for holding the shift boot?) Yes it still has the tab for the shift boot
2) the short cable that goes from the rear hatch latch mechanism to the rear hatch lock available
3) the aim-able passenger side climate control/blower vent closest to the door (if it still has most of the tabs to hold it in place) one tab is broken, still work, i tried it
4) the driver side mirror available
5) the turn signal/headlight switch available
6) the windshield sprayer nozzles (assuming they're not clogged) maybe clogged, not recommended
7) the entire hood latch mechanism (the handle thing under the dash, the cable from there to the latch, the latch mechanism itself, and the loop on the underside of the hood that it hooks onto, and all the bolts/screws to go with it) available


I'm also trying to get the inner fender well plastics, but they'd probably be way expensive to ship due to their size. If they won't be super expensive to ship I'd love a price on those as well. I wish I'd gotten to your thread sooner - I'm trying to get myself that rear hatch cover as well, but someone beat me to it tongue.gif a lot of people had interest on it wink.gif


Will PM you tonight on the details. Pleasure doing business with you!


--------------------
God made man....
Everything else...
Made in China

post May 22, 2013 - 4:17 PM
+Quote Post
cheela



Enthusiast
*****
Joined Feb 2, '07
From Berlin, WI
Currently Offline

Reputation: 18 (100%)




are floor mats still available?


--------------------

*1997 Celica ST - 3SGE Greytop BEAMS
*1977 Celica RA29 - Classic Cruiser
*2005 Matrix AWD - dedded but still hanging around like a ghost
2019 Rav4 XLE Premium - Sports mode is fun.
post May 22, 2013 - 4:18 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (cheela @ May 22, 2013 - 2:17 PM) *
are floor mats still available?


Yes, they are the 25th anniversary floor mats


--------------------
God made man....
Everything else...
Made in China

post May 22, 2013 - 11:27 PM
+Quote Post
micronian

Enthusiast

Joined Jul 2, '12
From Clifton, NJ
Currently Offline

Reputation: 0 (0%)




Is the climate control, you posted a picture of, still available?
post May 22, 2013 - 11:28 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (micronian @ May 22, 2013 - 9:27 PM) *
Is the climate control, you posted a picture of, still available?


Yes it is, what is your zip?


--------------------
God made man....
Everything else...
Made in China

post May 23, 2013 - 12:27 AM
+Quote Post
Davesceli

Enthusiast
**
Joined Apr 24, '04
From S. Cali
Currently Offline

Reputation: 0 (0%)




How much do you want for the wiring harness? (ecu to engine)

Im in LA so i can pick it up
post May 23, 2013 - 12:32 AM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (Davesceli @ May 22, 2013 - 10:27 PM) *
How much do you want for the wiring harness? (ecu to engine)

Im in LA so i can pick it up


That we have to wait before it goes into the junk yard. I will post it when i have taken it off. Thanks


--------------------
God made man....
Everything else...
Made in China

post May 23, 2013 - 8:31 PM
+Quote Post
micronian

Enthusiast

Joined Jul 2, '12
From Clifton, NJ
Currently Offline

Reputation: 0 (0%)




QUOTE (nics @ May 23, 2013 - 12:28 AM) *
QUOTE (micronian @ May 22, 2013 - 9:27 PM) *
Is the climate control, you posted a picture of, still available?


Yes it is, what is your zip?



07503
post May 23, 2013 - 8:40 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (micronian @ May 23, 2013 - 6:31 PM) *
QUOTE (nics @ May 23, 2013 - 12:28 AM) *
QUOTE (micronian @ May 22, 2013 - 9:27 PM) *
Is the climate control, you posted a picture of, still available?


Yes it is, what is your zip?



07503


Will get that boxed and weighed next week. I will be back on wednesday and should be able to give you a shipping weight/price. Thanks


--------------------
God made man....
Everything else...
Made in China

post May 24, 2013 - 11:18 AM
+Quote Post
gen6coupe

Enthusiast
**
Joined Sep 13, '10
From Austin, tx
Currently Offline

Reputation: 3 (100%)




looking for info about stereo, AC/hazard/stereo bezel, shifter bezel and steering wheel. (cost w/ shipping, individually and together)

does this car have the tweeters inside the mirrors?

address is in austin tx 78744

This post has been edited by gen6coupe: May 24, 2013 - 11:18 AM
post May 24, 2013 - 12:42 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (gen6coupe @ May 24, 2013 - 9:18 AM) *
looking for info about stereo, AC/hazard/stereo bezel, shifter bezel and steering wheel. (cost w/ shipping, individually and together)

does this car have the tweeters inside the mirrors?

address is in austin tx 78744


It has the stock stereo, stereo bezel is sold. Shifter bezel sold pending funds. Tweeter tabs are broken. Will get back to you thurs next week, i will be on out of town but open to inquiries. Thanks


--------------------
God made man....
Everything else...
Made in China

post May 24, 2013 - 2:31 PM
+Quote Post
gen6coupe

Enthusiast
**
Joined Sep 13, '10
From Austin, tx
Currently Offline

Reputation: 3 (100%)




QUOTE (nics @ May 24, 2013 - 12:42 PM) *
QUOTE (gen6coupe @ May 24, 2013 - 9:18 AM) *
looking for info about stereo, AC/hazard/stereo bezel, shifter bezel and steering wheel. (cost w/ shipping, individually and together)

does this car have the tweeters inside the mirrors?

address is in austin tx 78744


It has the stock stereo, stereo bezel is sold. Shifter bezel sold pending funds. Tweeter tabs are broken. Will get back to you thurs next week, i will be on out of town but open to inquiries. Thanks


thanks for quick reply.

still interested in stereo w/ pocket and steering wheel (if not damaged/rough on the inside where hands grip) thanks!


edit: OH! and the rubbers around the main headlamps.

This post has been edited by gen6coupe: May 24, 2013 - 2:32 PM
post May 24, 2013 - 2:37 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (gen6coupe @ May 24, 2013 - 12:31 PM) *
QUOTE (nics @ May 24, 2013 - 12:42 PM) *
QUOTE (gen6coupe @ May 24, 2013 - 9:18 AM) *
looking for info about stereo, AC/hazard/stereo bezel, shifter bezel and steering wheel. (cost w/ shipping, individually and together)

does this car have the tweeters inside the mirrors?

address is in austin tx 78744


It has the stock stereo, stereo bezel is sold. Shifter bezel sold pending funds. Tweeter tabs are broken. Will get back to you thurs next week, i will be on out of town but open to inquiries. Thanks


thanks for quick reply.

still interested in stereo w/ pocket and steering wheel (if not damaged/rough on the inside where hands grip) thanks!


edit: OH! and the rubbers around the main headlamps.


The pocket on the stereo is sold. I sold the driver side headlights and included the rubber around it. The passenger side is boxed up already and the rubber is included. Sorry about that kindasad.gif


--------------------
God made man....
Everything else...
Made in China

post May 24, 2013 - 7:37 PM
+Quote Post
fhalperformance

Enthusiast
*
Joined Mar 5, '13
From whitesboro,ny
Currently Offline

Reputation: 5 (100%)




Your gas tank & filler neck in good shape? Willing to ship to 13492?


--------------------
2000 tundra - DD tow vehicle
2001 mrs - paddle shifted 2gr in progress.
2000 celica gts - custom veilside ff-gt based widebody kit. hotchkis tvs racing setup.
1990 mr2 - 3mz swap in progress
1990 st185 - fab car
1991 st185 - fully restored, fully built.
1992 st185 - RHD conversion
1993 st185 - v6TT circuit race car build.
1992 st185 - IDK yet
post May 25, 2013 - 8:00 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (fhalperformance @ May 24, 2013 - 5:37 PM) *
Your gas tank & filler neck in good shape? Willing to ship to 13492?


Maybe not, it got kinked from the accident



--------------------
God made man....
Everything else...
Made in China

post May 28, 2013 - 8:04 PM
+Quote Post
PaukST



Enthusiast
*
Joined Mar 15, '12
From Wrightstown, NJ
Currently Offline

Reputation: 6 (100%)




If they're still available, I'd like to get the trim piece for the interior door handle as well, for both doors.


--------------------
1989 Celica ST Automatic "King Cobra" -- 2005-2006
1994 Celica ST 5-speed "King Cobra II" -- 2011-????
post May 29, 2013 - 10:51 AM
+Quote Post
mkernz22



Enthusiast
*****
Joined May 10, '10
From MA
Currently Offline

Reputation: 37 (100%)




I wish I lived closer, I want that headliner since you don't have a sunroof... frown.gif
post May 29, 2013 - 11:23 AM
+Quote Post
Phantom6gc

Enthusiast

Joined Apr 15, '13
From VA
Currently Offline

Reputation: 0 (0%)




hey man can u take more pics of the trunk ill probably buy everything from it if u still got it ??? the trim around, the carpet all that stuff
post May 30, 2013 - 12:55 AM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (mkernz22 @ May 29, 2013 - 8:51 AM) *
I wish I lived closer, I want that headliner since you don't have a sunroof... frown.gif


I know, I took it off today!


QUOTE (Phantom6gc @ May 29, 2013 - 9:23 AM) *
hey man can u take more pics of the trunk ill probably buy everything from it if u still got it ??? the trim around, the carpet all that stuff


Carpet, rear trunk trim, spare tire board are gone. I might have pics when it was still in the car.


--------------------
God made man....
Everything else...
Made in China

post May 30, 2013 - 10:49 PM
+Quote Post
Demontooth



Enthusiast
*
Joined Mar 8, '05
From Louisville
Currently Offline

Reputation: 0 (0%)




PM sent
post May 31, 2013 - 3:34 AM
+Quote Post
gen6coupe

Enthusiast
**
Joined Sep 13, '10
From Austin, tx
Currently Offline

Reputation: 3 (100%)




would you sell the bracket piece of the stereo? the metal part?
post May 31, 2013 - 7:58 AM
+Quote Post
kevH

Enthusiast

Joined Aug 30, '12
From New Jersey
Currently Offline

Reputation: 1 (100%)




Hey, how are the door window weather strips, inside and out if they are still available.

Kev
post May 31, 2013 - 8:12 AM
+Quote Post
kevH

Enthusiast

Joined Aug 30, '12
From New Jersey
Currently Offline

Reputation: 1 (100%)




Not sure how to delete a reply, I had asked if the parcel shelf was available but I fabricated a new hinge so I'm good.

This post has been edited by kevH: May 31, 2013 - 12:57 PM
post Jun 3, 2013 - 11:51 PM
+Quote Post
Davesceli

Enthusiast
**
Joined Apr 24, '04
From S. Cali
Currently Offline

Reputation: 0 (0%)




Hey just wondering if you were able to get to that wiring harness?
post Jun 4, 2013 - 2:37 AM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (Davesceli @ Jun 3, 2013 - 9:51 PM) *
Hey just wondering if you were able to get to that wiring harness?


I took of the part from the ecu, now trying to figure out the engine part.


--------------------
God made man....
Everything else...
Made in China

post Jun 6, 2013 - 7:43 PM
+Quote Post
PaukST



Enthusiast
*
Joined Mar 15, '12
From Wrightstown, NJ
Currently Offline

Reputation: 6 (100%)




Any word on the parts I posted about?


--------------------
1989 Celica ST Automatic "King Cobra" -- 2005-2006
1994 Celica ST 5-speed "King Cobra II" -- 2011-????
post Jun 6, 2013 - 8:40 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (PaukST @ Jun 6, 2013 - 5:43 PM) *
Any word on the parts I posted about?


Did you see my reply back then? The only problem is the hood cable, it broke but the latch and the lever are good. I haven't have a chance to put together the stuff. I get overwhelming amount of inquiries lol.

I'll try to find time this weekend to list what I have, box it, give you a price shipped. Thanks man

nics


--------------------
God made man....
Everything else...
Made in China

post Jun 7, 2013 - 1:33 AM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




Original Post Updated


--------------------
God made man....
Everything else...
Made in China

post Jun 7, 2013 - 12:31 PM
+Quote Post
cyb593



Enthusiast
***
Joined Feb 22, '04
From USA
Currently Offline

Reputation: 3 (100%)




Do you have the interior rear view mirror still? If so how much shipped to 30044?

post Jun 7, 2013 - 1:23 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (cyb593 @ Jun 7, 2013 - 10:31 AM) *
Do you have the interior rear view mirror still? If so how much shipped to 30044?


It is brown, I have it. $15 shipped


--------------------
God made man....
Everything else...
Made in China

post Jun 7, 2013 - 3:56 PM
+Quote Post
Syaoran



Enthusiast
*****
Joined Jan 4, '12
From US
Currently Offline

Reputation: 6 (100%)




How much for the headlight stalk, if you'll sell them separately?


--------------------
1993 Celica GT Coupe - sold
1994 Celica GT Liftback
post Jun 7, 2013 - 4:33 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (Syaoran @ Jun 7, 2013 - 1:56 PM) *
How much for the headlight stalk, if you'll sell them separately?


Just edited my post, someone beat you to it. Sold pending funds, i'll let you know if it falls through.


--------------------
God made man....
Everything else...
Made in China

post Jun 7, 2013 - 7:39 PM
+Quote Post
Syaoran



Enthusiast
*****
Joined Jan 4, '12
From US
Currently Offline

Reputation: 6 (100%)




Alright thanks.


--------------------
1993 Celica GT Coupe - sold
1994 Celica GT Liftback
post Jun 8, 2013 - 11:45 AM
+Quote Post
PaukST



Enthusiast
*
Joined Mar 15, '12
From Wrightstown, NJ
Currently Offline

Reputation: 6 (100%)




QUOTE (nics @ Jun 6, 2013 - 9:40 PM) *
QUOTE (PaukST @ Jun 6, 2013 - 5:43 PM) *
Any word on the parts I posted about?


Did you see my reply back then? The only problem is the hood cable, it broke but the latch and the lever are good. I haven't have a chance to put together the stuff. I get overwhelming amount of inquiries lol.

I'll try to find time this weekend to list what I have, box it, give you a price shipped. Thanks man

nics


Yeah, I did. Seeing as you still have the car, I'm actually trying to replace most of my plastic interior trim pieces (ABS plastic mostly). They're painted red (badly) and I haven't been having much success stripping that paint off. Long story short, I'm interested in all of the remaining dash vents, the driver's side window/door lock piece (I don't really need the switches, mine work fine), both door handle trim pieces... basically everything in this picture. Of course that's in addition to the other stuff. So whenever you get everything set up, just PM me so we can set up a price. Thanks!



--------------------
1989 Celica ST Automatic "King Cobra" -- 2005-2006
1994 Celica ST 5-speed "King Cobra II" -- 2011-????
post Jun 22, 2013 - 6:36 PM
+Quote Post
zoik



Enthusiast
**
Joined Aug 28, '07
From france
Currently Offline

Reputation: 0 (0%)




Do you have the oem radio?
post Jun 22, 2013 - 7:35 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (zoik @ Jun 22, 2013 - 4:36 PM) *
Do you have the oem radio?


I do! PM me an offer.


--------------------
God made man....
Everything else...
Made in China

post Jun 24, 2013 - 5:05 PM
+Quote Post
gen6coupe

Enthusiast
**
Joined Sep 13, '10
From Austin, tx
Currently Offline

Reputation: 3 (100%)




i think it was me who asked about the wheel... how much to 78744?
post Jun 24, 2013 - 5:35 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (gen6coupe @ Jun 24, 2013 - 3:05 PM) *
i think it was me who asked about the wheel... how much to 78744?


I will box it and weigh it out. Do you need the airbag?


--------------------
God made man....
Everything else...
Made in China

post Jun 26, 2013 - 4:19 PM
+Quote Post
mrgignac



Enthusiast

Joined May 18, '09
From Maine
Currently Offline

Reputation: 0 (0%)




Hi, do you still have the rear bumper support? mine is rotted and i need it to get mine stickered. Thanks a lot. would be shipping to 04240
post Jun 26, 2013 - 4:32 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




QUOTE (mrgignac @ Jun 26, 2013 - 2:19 PM) *
Hi, do you still have the rear bumper support? mine is rotted and i need it to get mine stickered. Thanks a lot. would be shipping to 04240


Sorry, the whole car is gone now. Thanks


--------------------
God made man....
Everything else...
Made in China

post Jul 1, 2013 - 11:52 AM
+Quote Post
gen6coupe

Enthusiast
**
Joined Sep 13, '10
From Austin, tx
Currently Offline

Reputation: 3 (100%)




QUOTE (nics @ Jun 24, 2013 - 6:35 PM) *
QUOTE (gen6coupe @ Jun 24, 2013 - 3:05 PM) *
i think it was me who asked about the wheel... how much to 78744?


I will box it and weigh it out. Do you need the airbag?


dont need the airbag. please give me a quote.
post Jul 1, 2013 - 10:00 PM
+Quote Post
jacOOLito

Enthusiast

Joined Jun 2, '09
From San Diego, CA
Currently Offline

Reputation: 1 (100%)




Hi do you still have the passenger air bag? Please let me know, I dont in quite a lot anymore so please contact me at "my s/n" @cox.net. Thank you!
post Jul 2, 2013 - 3:56 PM
+Quote Post
Angieworks

Enthusiast

Joined Jul 2, '13
From New York
Currently Offline

Reputation: 0 (0%)




do you have the piece above the shifter box. I think it's called an instrument center panel. I need the face that goes over the A/C and radio.



QUOTE (nics @ May 8, 2013 - 2:37 PM) *
Update: 6/22/2013

Finally got rid of the car. I will clean the original post sometime and post the left over stuff

____________________________________________________________
______

Update: 6/6/2013

I still have the Celi, landlord is happy about it rolleyes.gif but I don't care no more..

Updated the parts that are sold below, more parts listed. Excuse the ugly pics, I can take better pics upon request.



Steering wheel - someone asked for it but I cannot remember who


Steering wheel Air Bag


Turn stalk -sold pending funds and washer stalk


Passenger side air bag


Cruise control module


Engine control module/ECU


Driver and Passenger side mirrors
No pic yet




_________________________________________________

Update: 5/21/2013

These items are up for sale again.

Seat Belts $50 each


A set of 25th Anniversary Floor Mats $20 sold

USDM pair of tail lights no cracks


Crash bar and brackets $40+shipping


Rear View Mirror $10+shipping sold

Instrument Panel Plastic $10+shipping


Shifter Plastic Trim $15+shipping sold pending funds


Steering Column Plastic Trim $10+shipping


Ignition Plastic Trim $5+shipping


Cruise Control Actuator $70+shipping including the bracket - sold pending funds


Climate Control Unit $60+shipping sold


Gauge Cluster


Passenger Side Low Beam $45+shipping No broken tabs




______________________________________

Update: 5/14/2013

These are items that are boxed and ready to be shipped. Buyers will be pm'ed for confirmation. If I do not get a response by the 16th, I will move on to the next buyer. The shipping weight is listed below so if the transaction falls through, you can calculate shipping rates from 94538.

Driver Side High Beam - shipping weight 6lbs - gts4>aldizzurp>Suprakid

Tail Lights - shipping weight 7lbs - benny

Passenger Side Low Beams - shipping weight 6lbs

Thanks
______________________________________

Update: 5/14/2013

Will finalize a list later for items that are taken of and ready to be delivered/shipped. I will package them and get a shipping quote. Thanks



______________________________________

Update: 5/10/2013

I have received a number of interest on parts and the whole car. I'd like to give priority for those who are interested in taking the whole car as is however, there are some items that have been paid for already.

Here are some items that are taken off the car and will be delivered this weekend:

Spoiler
Rear Trunk plastic
Spare tire cardboard cover
Center Console Plastic
Hatch Cover
Exhaust manifold cover

For those who are interested in buying the remainder of the car, Here are the parts that are taken off but will be included

Tail Lights
Head Lights

Parts that have dibs/interest:

Wiring Harness
Starter
Speed Sensor
ECU
Passenger side fender

So if you are serious in buying the whole car, please tell me

  • Tell me when you are pick it up?
  • How are you going to transport the car?
  • Are you willing to put up a deposit before picking up the car for the amount of $300? - I know it sounds high but I hope it is understandable that if I don't have a deposit from a prospective buyer and he decides to back out on the date of pick up, I will end up running out of time by June 1st and of all that time wasted, I could have helped other members get parts they needed.


I am giving folks that are interested in buying the whole car until May 15.

PM's replied

Thanks
________________________________

Hey Guys,

I need to get rid of my 95 Celica GT by June 1, 2013. This is a great parts car and I am looking to sell some parts of it before it goes to the Junk Yard. If anybody is interested in taking the whole car, I will sell it to you for $500. It has suspension damage on the front and rear driver side.

I have started parting out some interior parts and some parts in the engine bay. Please let me know what you need so I can take it off before it goes to the scrap yard. See the pictures below. I can deliver items in california from Santa Clara county to San Diego County via I5.

Send me a pm or msg me thru facebook if interested, I respond faster on FB. Thanks

nics

Link to my previous thread http://www.6gc.net/forums/index.php?showtopic=88867


















post Jul 2, 2013 - 6:48 PM
+Quote Post
nics



Enthusiast
*****
Joined Feb 15, '08
From Royal Oak, MI
Currently Offline

Reputation: 7 (100%)




Sorry that is sold.

QUOTE (Angieworks @ Jul 2, 2013 - 1:56 PM) *
do you have the piece above the shifter box. I think it's called an instrument center panel. I need the face that goes over the A/C and radio.



QUOTE (nics @ May 8, 2013 - 2:37 PM) *
Update: 6/22/2013

Finally got rid of the car. I will clean the original post sometime and post the left over stuff

____________________________________________________________
______

Update: 6/6/2013

I still have the Celi, landlord is happy about it rolleyes.gif but I don't care no more..

Updated the parts that are sold below, more parts listed. Excuse the ugly pics, I can take better pics upon request.



Steering wheel - someone asked for it but I cannot remember who


Steering wheel Air Bag


Turn stalk -sold pending funds and washer stalk


Passenger side air bag


Cruise control module


Engine control module/ECU


Driver and Passenger side mirrors
No pic yet




_________________________________________________

Update: 5/21/2013

These items are up for sale again.

Seat Belts $50 each


A set of 25th Anniversary Floor Mats $20 sold

USDM pair of tail lights no cracks


Crash bar and brackets $40+shipping


Rear View Mirror $10+shipping sold

Instrument Panel Plastic $10+shipping


Shifter Plastic Trim $15+shipping sold pending funds


Steering Column Plastic Trim $10+shipping


Ignition Plastic Trim $5+shipping


Cruise Control Actuator $70+shipping including the bracket - sold pending funds


Climate Control Unit $60+shipping sold


Gauge Cluster


Passenger Side Low Beam $45+shipping No broken tabs




______________________________________

Update: 5/14/2013

These are items that are boxed and ready to be shipped. Buyers will be pm'ed for confirmation. If I do not get a response by the 16th, I will move on to the next buyer. The shipping weight is listed below so if the transaction falls through, you can calculate shipping rates from 94538.

Driver Side High Beam - shipping weight 6lbs - gts4>aldizzurp>Suprakid

Tail Lights - shipping weight 7lbs - benny

Passenger Side Low Beams - shipping weight 6lbs

Thanks
______________________________________

Update: 5/14/2013

Will finalize a list later for items that are taken of and ready to be delivered/shipped. I will package them and get a shipping quote. Thanks



______________________________________

Update: 5/10/2013

I have received a number of interest on parts and the whole car. I'd like to give priority for those who are interested in taking the whole car as is however, there are some items that have been paid for already.

Here are some items that are taken off the car and will be delivered this weekend:

Spoiler
Rear Trunk plastic
Spare tire cardboard cover
Center Console Plastic
Hatch Cover
Exhaust manifold cover

For those who are interested in buying the remainder of the car, Here are the parts that are taken off but will be included

Tail Lights
Head Lights

Parts that have dibs/interest:

Wiring Harness
Starter
Speed Sensor
ECU
Passenger side fender

So if you are serious in buying the whole car, please tell me

  • Tell me when you are pick it up?
  • How are you going to transport the car?
  • Are you willing to put up a deposit before picking up the car for the amount of $300? - I know it sounds high but I hope it is understandable that if I don't have a deposit from a prospective buyer and he decides to back out on the date of pick up, I will end up running out of time by June 1st and of all that time wasted, I could have helped other members get parts they needed.


I am giving folks that are interested in buying the whole car until May 15.

PM's replied

Thanks
________________________________

Hey Guys,

I need to get rid of my 95 Celica GT by June 1, 2013. This is a great parts car and I am looking to sell some parts of it before it goes to the Junk Yard. If anybody is interested in taking the whole car, I will sell it to you for $500. It has suspension damage on the front and rear driver side.

I have started parting out some interior parts and some parts in the engine bay. Please let me know what you need so I can take it off before it goes to the scrap yard. See the pictures below. I can deliver items in california from Santa Clara county to San Diego County via I5.

Send me a pm or msg me thru facebook if interested, I respond faster on FB. Thanks

nics

Link to my previous thread http://www.6gc.net/forums/index.php?showtopic=88867





















QUOTE (gen6coupe @ Jul 1, 2013 - 9:52 AM) *
QUOTE (nics @ Jun 24, 2013 - 6:35 PM) *
QUOTE (gen6coupe @ Jun 24, 2013 - 3:05 PM) *
i think it was me who asked about the wheel... how much to 78744?


I will box it and weigh it out. Do you need the airbag?


dont need the airbag. please give me a quote.


Will get back you next week. I am out of town. Will pm you next week. Thanks

QUOTE (jacOOLito @ Jul 1, 2013 - 8:00 PM) *
Hi do you still have the passenger air bag? Please let me know, I dont in quite a lot anymore so please contact me at "my s/n" @cox.net. Thank you!


Pm sent


--------------------
God made man....
Everything else...
Made in China


4 Pages V   1 2 3 > » 
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: August 17th, 2025 - 4:58 PM