FS: Four 20mm Ichiba Spacers SOLD! MODS CLOSE!, SOLD! MODS CLOSE! Options

[ILoveMySilly97]

FS: 4 X 20mm Ichiba Spacer : $135 shipped : 5x100 : 54.1 centerbore : Includes 20 extended studs : Located in Hanford, Ca : Text me at 1-559-380-5764.

Im willing to part out for $75 shipped for a pair if split the set with another buyer.

Note the two painted red are kind of stripped but they can still be used. I've tested them all and those two are the only ones that needs a bit more tug. It didn't strip my nut and it reversed out fine.

Here's how I installed my extended studs. Not hard to do.
http://www.youtube.com/watch?v=B0VIEGcJJ-U



This post has been edited by ILoveMySilly97: Apr 4, 2014 - 4:55 AM

[ILoveMySilly97]

Updated post.

[ILoveMySilly97]

bump!

[SupraKid]

My offer still stands.

[ILoveMySilly97]

My offer still stands.

was it you who was texting me the other days?

[SupraKid]

My offer still stands.

was it you who was texting me the other days?

No, I sent you a message on here.

[ILoveMySilly97]

My offer still stands.

was it you who was texting me the other days?

No, I sent you a message on here.

Oh yea. Sorry. Deleted the message. You wanted only a pair right? If no one buys it as a set anytime soon then I'll end up selling you a pair.

[mkernz22]

My offer still stands.

was it you who was texting me the other days?

No, I sent you a message on here.

Oh yea. Sorry. Deleted the message. You wanted only a pair right? If no one buys it as a set anytime soon then I'll end up selling you a pair.

I offered to buy a pair too. Would have worked perfect.

[cwong]

http://www.amazon.com/gp/aw/d/B004AGH6KW?c...354&sr=8-16



Correct me if im wrong but isn't this the same thing.
If it is isnt yours kinda pricey

[ILoveMySilly97]

http://www.amazon.com/gp/aw/d/B004AGH6KW?c...354&sr=8-16



Correct me if im wrong but isn't this the same thing.
If it is isnt yours kinda pricey

It's similar but different. Your post has only a pair so only two spacers. Two for the front or two for the rear. Also it's bolt on so the stock studs is going to be hitting into your rim unless your rim has extra space to clear the stock studs. Mine has a full set which has four spacers for all four corners. Mine is extended studs so you'll need to press in the new extended studs and don't got to worry about the stud clearance issue. Price wise. I'd say mine is reasonable. If you buy a full brand new set it's double what you posted which is around $240-$260 total.

This post has been edited by ILoveMySilly97: Mar 3, 2014 - 1:40 AM

[mkernz22]

http://www.amazon.com/gp/aw/d/B004AGH6KW?c...354&sr=8-16



Correct me if im wrong but isn't this the same thing.
If it is isnt yours kinda pricey

It's similar but different. Your post has only a pair so only two spacers. Two for the front or two for the rear. Also it's bolt on so the stock studs is going to be hitting into your rim unless your rim has extra space to clear the stock studs. Mine has a full set which has four spacers for all four corners. Mine is extended studs so you'll need to press in the new extended studs and don't got to worry about the stud clearance issue. Price wise. I'd say mine is reasonable. If you buy a full brand new set it's double what you posted which is around $240-$260 total.

Just to correct you on one thing, stock studs will be fine with 20mm bolt on spacers. The spacers are thick enough so that the stock studs don't stick out and hit the wheel. If you have extended studs, that's when you'll have a problem with the studs hitting the wheels (unless there's a space in the wheel so that they don't).

[ILoveMySilly97]

^no mkernz. What I said was correct. You got it the other way around. Extended studs replaces the stock studs so the stock studs wont even be on your car anymore. There for how is it you only have the 5 extended studs on each corner that well go through the 5 holes in each rim. The bolt on will double your studs on each corner. That's when you have the rim space/clearance issue.

[richee3]

You guys are saying the same thing. Mike said that stock studs with 20 mm bolt on spacers will be fine, but extended studs with bolt on spacers will be a problem. Mike was referring to bolt on spacers only. Simple miscommunication.

[ILoveMySilly97]

You guys are saying the same thing. Mike said that stock studs with 20 mm bolt on spacers will be fine, but extended studs with bolt on spacers will be a problem. Mike was referring to bolt on spacers only. Simple miscommunication.

Oh. I see what you mean now. Im not too sure if the 20mm bolt on is thick enough to clear the stock stud. I never confirmed it before. All I know is that our stock studs is less than 25mm long so 25mm+ bolt on is a for sure no stock stud issue.

[mkernz22]

You guys are saying the same thing. Mike said that stock studs with 20 mm bolt on spacers will be fine, but extended studs with bolt on spacers will be a problem. Mike was referring to bolt on spacers only. Simple miscommunication.

Oh. I see what you mean now. Im not too sure if the 20mm bolt on is thick enough to clear the stock stud. I never confirmed it before. All I know is that our stock studs is less than 25mm long so 25mm+ bolt on is a for sure no stock stud issue.

I'm confirming it because I had 20mm bolt-on's at one point...

[ILoveMySilly97]

bump! Mkernz needs a pair buddy. Lol.

[richee3]

I can take them if nobody else is in line.

[mkernz22]

Well I want them, but I only need two cause I'm moving my 15mm's to the front (replacing the 10mm's already there), and putting the 20mm's in the rear.

[richee3]

I guess I didn't specify. I can take the other pair if Andrew isn't interested in them anymore.

[mkernz22]

oh alright, swwweeeeet!
I'll take the two bad studs if you need all the good ones?
I already have extended studs so it's not a huge deal to me

[richee3]

oh alright, swwweeeeet!
I'll take the two bad studs if you need all the good ones?
I already have extended studs so it's not a huge deal to me

Same goes for me, I don't need the studs either. I just need to check with Andrew to see if he still wants the spacers.

[mkernz22]

oh alright, swwweeeeet!
I'll take the two bad studs if you need all the good ones?
I already have extended studs so it's not a huge deal to me

Same goes for me, I don't need the studs either. I just need to check with Andrew to see if he still wants the spacers.

I highly doubt it cause I guess andrew was really lowballing him on them

[ILoveMySilly97]

If you mean Andrew as in suprakid then I'm not taking his offer. lol. But I cam split it between you and mkernz for $70 shipped each pair.

[mkernz22]

Works for me, but its gunna be about 3 weeks till I have the money. Steph just got me a quote for two fuel lines that I need and they're a little more than I was expecting...definitely buying them so dont worry haha

[ILoveMySilly97]

Works for me, but its gunna be about 3 weeks till I have the money. Steph just got me a quote for two fuel lines that I need and they're a little more than I was expecting...definitely buying them so dont worry haha

[SupraKid]

When I made my offer the price was 120, not sure why the price went up.

[ILoveMySilly97]

When I made my offer the price was 120, not sure why the price went up.

That's because it was 120 plus shipping now it's 135 shipped. shipping for the whole set is 17.45 usps flat rate. So I saved you 2.45 dollars there.

[mkernz22]

When I made my offer the price was 120, not sure why the price went up.

That's because it was 120 plus shipping now it's 135 shipped. shipping for the whole set is 17.45 usps flat rate. So I saved you 2.45 dollars there.

you can fit all 4 in a small flatrate box though.... did that with my 20mm bolt on ones before I sold them

[ILoveMySilly97]

When I made my offer the price was 120, not sure why the price went up.

That's because it was 120 plus shipping now it's 135 shipped. shipping for the whole set is 17.45 usps flat rate. So I saved you 2.45 dollars there.

you can fit all 4 in a small flatrate box though.... did that with my 20mm bolt on ones before I sold them

You sure it was the small one? I think you're mistaking it with the medium/large one. The small one is 8-5/8" x 5-3/8" x 1-5/8". Wander how you managed to fit all four in there. Lol.

This post has been edited by ILoveMySilly97: Mar 11, 2014 - 4:53 PM

[mkernz22]

When I made my offer the price was 120, not sure why the price went up.

That's because it was 120 plus shipping now it's 135 shipped. shipping for the whole set is 17.45 usps flat rate. So I saved you 2.45 dollars there.

you can fit all 4 in a small flatrate box though.... did that with my 20mm bolt on ones before I sold them

You sure it was the small one? I think you're mistaking it with the medium/large one. The small one is 8-5/8" x 5-3/8" x 1-5/8". Wander how you managed to fit all four in there. Lol.

jk, it was definitely the medium one then haha
you should be able to fit two in a small one...hopefully. squeeze them in! haha

[ILoveMySilly97]

Yea. I tried when you said that. I had a small flat rate in my garage. I couldn't even stuff just the two spacers. It'll fit one spacer and the bolts though. I might end up sending them in two small flat rate since it's cheaper that way for a pair.

[ILoveMySilly97]

All four pending sale to mkernz22.

[ILoveMySilly97]

bump

[97cecilia]

since were talking about spacers. I have a quick question and you guys sound very familiar with them.

I just purchased some stock 2002 toyota celica rims there 16" rims and there the same weithe as the stock 15" rims that come in a toyota celica 1997 st. do you guys think I'll need spacers for the rims?

below is the link to what the rims look like.


http://www.ebay.com/itm/2000-2001-2002-200...88e&vxp=mtr

[ILoveMySilly97]

since were talking about spacers. I have a quick question and you guys sound very familiar with them.

I just purchased some stock 2002 toyota celica rims there 16" rims and there the same weithe as the stock 15" rims that come in a toyota celica 1997 st. do you guys think I'll need spacers for the rims?

below is the link to what the rims look like.


http://www.ebay.com/itm/2000-2001-2002-200...88e&vxp=mtr

You will not need spacers to fit properly but is recommended for better fitment.

[97cecilia]

since were talking about spacers. I have a quick question and you guys sound very familiar with them.

I just purchased some stock 2002 toyota celica rims there 16" rims and there the same weithe as the stock 15" rims that come in a toyota celica 1997 st. do you guys think I'll need spacers for the rims?

below is the link to what the rims look like.


http://www.ebay.com/itm/2000-2001-2002-200...88e&vxp=mtr

You will not need spacers to fit properly but is recommended for better fitment.

aaaah I see? nice thanks for the advice and what kinda of spacers if you dont mine me asking? by the way how low is your car it looks like you dropped it a little maybe 1.5"

[ILoveMySilly97]

Not sure how low my car is but its pretty low. Lol. The size on spacer for your gts wheels. Is going to more than 25mm to be flushed so id say you should get bolt on style spacers. Not the ones like I have up for sale here.

[97cecilia]

Not sure how low my car is but its pretty low. Lol. The size on spacer for your gts wheels. Is going to more than 25mm to be flushed so id say you should get bolt on style spacers. Not the ones like I have up for sale here.

Can you send me a link so I can buy them? I'm going all out now lol I saved the money so now its time to spend it lol before my girl finds out I even had it lol. I just keep telling here my friends from 6gc.net are very kind and decide to donate parts lol

[ILoveMySilly97]

bump

[ILoveMySilly97]

SOLD!