FS : EndWorks Gauge cluster bezel with pods Options

[The_enD]

EndWorks customized OEM bezel with pods for the speedometer/cluster. New plexiglass that can be clear or tinted (the tint is removable). Nothing extra needed to fit, you just swap your old one. Fits all 6 gen Celicas.
The basic version is $130 USD, both the long and short design of the pods. I offer four additional options as well, each adding $8. Options : tinted plexiglass, glossy inner part of the pods, painted edge with a preferred color, frosted lettering in the center(many different ones available : TRD, WRC, Celica, GT-FOUR, etc). That price includes shipping with a tracking #, but does not include the PayPal fees(you can just send as family/friends if you like to avoid fees).
Please leave feedback after you have received your item. Before posting negative one be sure to check with me, so we can resolve any problem.
http://www.6gc.net/members/reputation/34901
Please check out this thread as I keep it more up to date : http://www.6gc.net/forums/index.php?showtopic=90053








Tinted


Second model, longer pods, all slanted. These involve some more time, but I've priced them the same as the other ones, so there is no confusion.











How it looks with a cluster, these have tint:













This doesn't have tint


Example of the frosted lettering, first picture is before the tint.









This post has been edited by The_enD: Oct 25, 2014 - 5:32 AM

[Malhar95]

Do u have glass that covers the corner triangle places? Like where the seat belt light or fuel light is?

[The_enD]

These are made with no glass at the triangle places, sorry.

This post has been edited by The_enD: Mar 24, 2014 - 10:45 AM

[Malhar95]

These are made with no glass, sorry.

So only the needle parts have glass?
I'm asking because I have some already but the glass part was preventing it for install. So I was about to remove the glass from those area but worried about dust getting in there.

Is that an issue with yours?

[The_enD]

A little bit of dust will do no harm.

[Malhar95]

A little bit of dust will do no harm.

If you've had these on your car for a while, can you post a pic of how much got in there let's say after a week or if you haven't cleaned that area, just how long ago it was since last clean and a pic?

Sorry if I'm asking too much.

[The_enD]

Dude, don't worry about the dust. If you don't like dust collecting anywhere around the cluster just buy a small brush and carry it in your glovebox.
If you have any more questions, PM me.

Another thing I can suggest for you is to remove the panels that are behind the steering wheel. They are holding with 3 bolts. It will clear space for the cluster to get in.

[Malhar95]

Dude, don't worry about the dust. If you don't like dust collecting anywhere around the cluster just buy a small brush and carry it in your glovebox.
If you have any more questions, PM me.

Another thing I can suggest for you is to remove the panels that are behind the steering wheel. They are holding with 3 bolts. It will clear space for the cluster to get in.

That's a good idea.
Sorry didn't mean any disrespect or negative, just wondering because I was in that boat.

Always a fan of your work.

[The_enD]

Thanks, man.

It's not a problem, don't worry about it, you could of just PM'd me tho.

[underground_desi...]

That's amazing!!!
Well done.
I may buy one and paint it to mach the rest interior when I put it back in the car.
Congratulations again!!!!

Oh!
Don't worry about the dust.
I had my civic instruments with no glass and never had a problem.

[The_enD]

That's amazing!!!
Well done.
I may buy one and paint it to mach the rest interior when I put it back in the car.
Congratulations again!!!!

Oh!
Don't worry about the dust.
I had my civic instruments with no glass and never had a problem.

Thanks, Savvas.


The pods are sold!

[The_enD]

I just finished making another bezel with pods. I was going to paint it, but realized I am out of paint, so it's going to be tomorrow.
Posting here for my 6GC peeps, before any other places.

[The_enD]

....

This post has been edited by The_enD: Oct 25, 2014 - 5:34 AM

[The_enD]

.

This post has been edited by The_enD: Apr 27, 2014 - 2:10 PM

[The_enD]

I have a carbon fiber wrapped and then clear coat bezel for sale. $100 shipped for it. All three lenses included of course.









This post has been edited by The_enD: May 2, 2014 - 7:07 AM

[The_enD]

Trying out new paint methods. I like this look the most. $100 shipped







This post has been edited by The_enD: Apr 27, 2014 - 1:03 PM

[cyberblader1130]

How much for one in 3L2 red with clear coat?

[The_enD]

$110 shipped.

[cjh4l22]

WOW I just have to say this is awesome. I'll have to purchase and duplicate your setup at some point, but after buying my MS2 setup I need a few weeks to recoup before buying.
GLWS

This post has been edited by cjh4l22: May 2, 2014 - 9:46 AM

[cyberblader1130]

$110 shipped.

I'll be in touch after i collect some more funds, there is another purchase i would like to land first.

[Gearbox]

gauges looks great. what bulbs are you using for them to light up so nicely?

[The_enD]

gauges looks great. what bulbs are you using for them to light up so nicely?

I am using strips. I was unhappy with the uneven light of bulbs. Not to mention sometimes they just start flickering.

I'll be in touch after i collect some more funds, there is another purchase i would like to land first.

Sure, I'll hook you up.

[cyberblader1130]

gauges looks great. what bulbs are you using for them to light up so nicely?

I am using strips. I was unhappy with the uneven light of bulbs. Not to mention sometimes they just start flickering.

I'll be in touch after i collect some more funds, there is another purchase i would like to land first.

Sure, I'll hook you up.

PMed you some questions.

[The_enD]

Replied.

[The_enD]

Bump

This post has been edited by The_enD: Jun 9, 2014 - 2:51 PM

[jesse09]

Dropping in to leave a positive review on the best seller I've dealt with on 6GC and probably anywhere else. Second purchase from him and just like the first transaction it went very smooth. Fast communication, shipping and follow up.

This time a bought the custom pods and fitment was perfect, it could pass for a rare JDM OEM piece. Looks more modern and sleek then the original, even carbon fiber ones.



I bought the tinted set, and though I have a set of VERY cheap LEDs ( I will be replacing with Spree) it still lights up enough to not have any trouble seeing. If you decide it is too dark I believe the tint is removable.

Definitely recommend ENDs products.

[The_enD]

Ah, nothing like a happy customer, thanks Jesse. :]

[presure2]

i like the look of this product. really updates the cluster. can you do one in c/f without the clear? (i would like to clearcoat it myself @ work) do you have a pic of the material your using before you actually wrap the cluster so that you could get a close up pic so i can see the detail of it?
thanks!

[The_enD]

I would prefer not doing another carbon fiber one as it took me way too much time applying the carbon.

[abflug]

I'm looking for one of these with the long pods, if anyone still has one available you can send me a PM.