FS, Chicago , IL, valnces/side skirts/misc/OEM Options

[placham]

Following up for grabs, prices are with shipping in USA.....easiest way to get a hold of me is msg txt 7zero8-37two-1six85,,paypal is preferred form of payment unless its a local cash sale, Matt.........paypal as gift so no one gets hit with fee or fee to be covered on buyers end.....
Trd front valances Silver ***************SOLD SOLD SOLD*******************
Trd front valances red 165 ( same as above^ chipped out piece inside wheel well)
SSII front valances also not pictured black rears on my 6GC, looking to sell as set,,, SOLD
SS low skirts,,,,,, one set sold one set still for sale 200
Dash trim/bezel pieces ???? OBO lowers are for MT trans shifter
St215 ECU Auto 3sgte <<<<<<<<SOLD>>>>>
St215 stock BOV 50
HKS hard pipe no filter pod, has inlet temp sensor and BOV block off plate 95
ST202/4/5 kouki tails for hatch with harness 235

If I find more stuff around I'll throw it up here

Anyone need 6GC floor mats black LHD US mats (2 fronts and 2 rear nice condition)

****** DUE TO SOME SHADY $HIT I CAME ACROSS RECENTLY, I WILL ONLY ACCEPT PAYPAL FOR PAYMENT FOR OUT OF STATE BUYERS, PLEASE BE AWARE I HAVE BEEN CONTACTED FEW TIMES OUT OF STATE BUYER THAT OFFERED ME DOUBLE THE ASKING PRICE AND COULDNT MEET OR HAD SOMEONE ELSE PICK UP STUFF. IM MORE THAN WILLING TO GO A ROUTE LIKE THAT IF U OUT OF STATE N SAY U HAVE A FRIEND THAT CAN PICK IT UP FOR U, THATS FINE. I CAN ALWAYS SHIP, BUT IF SOMEONE HAS SOME MOVING COMPANY PICK UP STUFF, N CANT EVEN TALK ON PHONE THAN SORRY,, I DONT MIND A FACE TO FACE PICK UP WITH CASH OR PREPAY THROUGH PAYPAL AND THATS FINE.....ITS KIND OF FUNNY WHEN U GET AN EMAIL FROM "PAYPAL" BUT YOUR PAYPAL ACCOUNT DOESNT REFLECT ANYTHING LOL. wITH MONEY ON HOLD AND U GOTTA SEND XXX AMOUNT TO SOME COMPANY, LOL THROUGH MONEY GRAM OR WESTERN UNION, NO THANKS, i DID THAT COUPLE YEARS AGO AND HAD TO EAT COUPLE THOUSAND LESSON LEARNED....i JUST WANNA PUT THIS OUT THERE FOR EVERYONE SELLERS AND BUYERS, I DO NOT CONDONE THIS AT ALL, I EXPECT SOMEONE TO RECEIVE AN ITEM FROM ME IF SHIPPED LIKE POSTED AT PRICE WE SETTLE ON , NO LESS CAUSE IF I WAS TO BUY SOMETHING AND SPEND MY MONEY I WOULD EXPECT SAME IN RETURN.....SORRY GUYS JUST HAD TO VENT PLEASE BE CAUTIOUS....MY NUMBER IS ON PAGE I CAN BE REACHED ANY TIME. THIS WAS AN ITEM I HAD FOR SALE LOCALLY ON CRAIGSLIST

UPDATED PICS<< OF VALANCES I HAVE ********



damage on SS splitters



TRD knob


GT '94 stock exhaust

Changed my wheels so can let these go......Im thinking 290-think thats a fair asking price 4alloys with tires,,, Specs (Sparco?)wheels 15x6.5 +35 tires 205/55r15 Fuzion RZi directional, 2 have bout 50% N 2 75% tread wear, wear is even besides not rotation them in time.......multilug 5x100/114.3









Added 7-6-15
6GC low skirts (SS type) 255 picked up OBO pretty good shape factory black ,,, I can get better pics just ask








Radio brackets and single DIN factory storage box with lid/door ,,,whats it worth 50shipped?


6GC fog lamp option signal/light stalk ..................65 shipped




More pics, all following still here and for sale 08/07/15....ill see what else I dig up and if dont need it I'll post it here.. I'll be removing my stock GT exhaust if anyone needs exhaust let me know-> no pics yet




These are the wheels I removed from vehicle,, tires and wheels combo 250 picked up (all 4tires matching (directional) with alloy wheels Specs 15x6.5" 5x100/5x114.3 lug pattern tires Fuzion ZRi 205/55r15 88w 2 are about 55% backs are about 75-80% tread wear is even no cupping or flat spots, (I can measure tires with gauge) I had 10mm spacers on car


This post has been edited by placham: Sep 24, 2015 - 12:52 PM

[placham]

Also have Apexi Power Fc for 3SGE Altezza SXE10, I doubt it will work on my 4th gen 3SGTE st215 motor, think Altezza is MAF and I got MAP on my 3SGTE but harness plugs are same as ST215 3S 4th gen.

Matt
Update bout ecu and such

Top left 5SFE 94 manual trans ECU from my 6th Gen GT,,,,, Top Right ST215 3SGTE Caldina Auto ECU, Bottom Left Apexi FC for Altezza 3SGE might fit Beams 3S havent tried it with my St215 3SGTE but plugs are same. Bottom left 99 Camry 5SFE Auto ecu (not sure if anyone needs it but got it with my 5s to do a 5SGTE stroker)


Apexi Fc plug side

This post has been edited by placham: Jun 7, 2015 - 11:31 PM

[msk59]

Matt: How much are those white front valances shipped to 66542. Are those OEM?

[placham]

price is 225 shipped for SSII/III valances that would be a set front and rear (white fronts and black rear),,, I can get u more detailed pics and can part front/rear if u like, please text me.

[placham]

Most of the stuff still available up for grabs.

Matt

[RWD_curren]

you don't have any valences for a coupe rear do you?

[placham]

you don't have any valences for a coupe rear do you?

I have blk SS style ones, if interested they look like white ones but rear in blk.

Matt

[msk59]

price is 225 shipped for SSII/III valances that would be a set front and rear (white fronts and black rear),,, I can get u more detailed pics and can part front/rear if u like, please text me.

Hi Matt: I only need the front ones if they are OEM. I broke one of mine so need to replace those. Please let me know. In the picture you have the white ones and another small ones. My car is post facelift 1996,

Thank You again.

[placham]

price is 225 shipped for SSII/III valances that would be a set front and rear (white fronts and black rear),,, I can get u more detailed pics and can part front/rear if u like, please text me.

Hi Matt: I only need the front ones if they are OEM. I broke one of mine so need to replace those. Please let me know. In the picture you have the white ones and another small ones. My car is post facelift 1996,

Thank You again.

If u like pics I can get u pics of valances/spats ur interested in, if u can text me my # is at top of page, its easier to send pic via phone than take pic/upload to photobucket/link to forum ;-/

Matt

[placham]

Update ST215 ecu........sold, everything else that hasnt been claimed still here

[placham]

Mowww stuff added,, see first post,,,cash and local pick up is more than welcome......
BUMP <>

[jordisonjr]

Interested in Front SS-III Splitters. Still Available?

[placham]

Interested in Front SS-III Splitters. Still Available?

I see u posted on my other FS ad,,, so I'll reply to this more recent thread I started, yes they are available still
Yes SS front available also pulled SS rears off of my car those are available as well, can sell as set or part fronts and rears, also got pair of side skirts in black too. And my wheels with tires are for sale too ,, all this was on my St204 GT (st205 wrc conver front end) so parts will fit on a hatch and possibly coupe. I just never painted and mounted front spats

I also have TRD rears (by the way all my FS parts are OEM) but they dont fit my St204 their in black, I believe their for St206 Toyota Curren or US coupe Celica model and possibly will fit a vert. I have since bought another set and that fits my hatch, there is small difference at end curved part of valance/spat

text me at my cell at top of post, can discus payment details and send pics,,,Im bit busy right now but I'll try to add pics of side skirts/wheels and rims..

Matt

This post has been edited by placham: Aug 7, 2015 - 8:28 AM

[jordisonjr]

Text probably won't work, as Im in Canada and you the US, unless you have an Iphone.
Howmuch for just the SS-III fronts? Are they OEM? Any Cracks through the acutuall splitter? (Not too concerned about paint as they'll be repainted.)

[placham]

Text probably won't work, as Im in Canada and you the US, unless you have an Iphone.
Howmuch for just the SS-III fronts? Are they OEM? Any Cracks through the acutuall splitter? (Not too concerned about paint as they'll be repainted.)

Im gonna see if I can upload pics of them

[AlphaSigma]

Are you selling the tailights?

[placham]

yes everything in pics up for sale unless noted.

[MegaMac]

I may have overlooked a previously stated price, but how much would you take for a pair of those fog lights?

[cheela]

bump for a ton of good stuff everyone is always looking for.

[placham]

bump for a ton of good stuff everyone is always looking for.

THANKS NEED TO MOVE THIS STUFF THO ;-) but seems like no one needs it any more,,, I still got 5spd trans from 5SFE and ecu from my GT n no takers....

Fogs 70 shipped in USA or 160 fogs&switch-> I could probably even throw in relay and fuse if u need it too for a complete install-> face lift only lamps... I have one pair with one broken nipple...n brackets (R 52015-20310 L 52016-20150)...besides that lamps are mint n complete glass is clean n nice

All prices include shipping, n payment is via paypal,,, my contact is at top of page and my feedback on forum speaks for it self ;-)

Thanks for looking


P.S. I see I have 2 asking price for wheels, I'll honor lower price of 250 OBO picked up for 6GC members ;-) (wheels&tires as pictured)

This post has been edited by placham: Aug 18, 2015 - 10:56 AM

[jordisonjr]

Text probably won't work, as Im in Canada and you the US, unless you have an Iphone.
Howmuch for just the SS-III fronts? Are they OEM? Any Cracks through the acutuall splitter? (Not too concerned about paint as they'll be repainted.)

Still interested..

[placham]

Text probably won't work, as Im in Canada and you the US, unless you have an Iphone.
Howmuch for just the SS-III fronts? Are they OEM? Any Cracks through the acutuall splitter? (Not too concerned about paint as they'll be repainted.)

Still interested..

OEM, I posted new pics, so please look,,,, 130USD shipped for fronts? paypaled as gift or fees on ur end,,, but I havent shipped much to Canada so I have no clue if it cost more or same as in USA..
If u want contact me for more info

[blockustomz]

Best price for the red trd cracked shipped to 34997?

[placham]

Best price for the red trd cracked shipped to 34997?

Make an offer

[DIONYZUZ]

PMed

[placham]

PMed

I have replied via PM...

Im debating if I should hold on to these or not,, I might change my mind,, I doubt they will sell but whatever ,,Im pretty firm on $450 picked up these are genuine Toyota TRD aero optional high skirts, ultra light, theres couple cracks but actually nothing that would need repair just probably respray and mount. Im not too sure about price since these are hardly ever for sale........they will fit any celica 94-99 St202/204/205/206, think it should fit coupe as well..cracks are in pics front lower and rear lower no splits on corners or etc.. again these arent fiberglass but ABS plastic...they go up higher on body and sit lower and more aggressive look than SS low skirts....onto pics

[jordisonjr]

FYI, I don't think those will fit the Coupe.

[placham]

FYI, I don't think those will fit the Coupe.

What side skirts ??? TRD ones??? I don't see why they wouldn't since coupe/hatch/vert has same mid section body . The SS side skirts swap back n forth so don't see why these wouldn't

[jordisonjr]

FYI, I don't think those will fit the Coupe.

What side skirts ??? TRD ones??? I don't see why they wouldn't since coupe/hatch/vert has same mid section body . The SS side skirts swap back n forth so don't see why these wouldn't

Im 90% sure the OEM side skirts are different lengths for a Hatch and a convertable.
Perhaps they do fit the couple, but I thought the coupe and vert were the same.

[placham]

FYI, I don't think those will fit the Coupe.

What side skirts ??? TRD ones??? I don't see why they wouldn't since coupe/hatch/vert has same mid section body . The SS side skirts swap back n forth so don't see why these wouldn't

Im 90% sure the OEM side skirts are different lengths for a Hatch and a convertable.
Perhaps they do fit the couple, but I thought the coupe and vert were the same.

LOL, I dont wanna get into a argument but, Im curious how many sets of TRD skirts have u had or valances/spats.. I have had several through my hands... and as far as I can tell
Hatch and coupe outside shell is same besides rear bumper portion, and vert well its a coupe with top chopped off,, so ur point is?? Coupe is a Curren we didnt get that front end here. Its just like a 240sx between coupe and hatch all same but rear bumper/quarter,, same for vert 240sx coupe 240sx chopped top off............

[richee3]

The skirts can be modified to fit a convertible. It's not a direct fit but it's no huge modification either.

[jordisonjr]

FYI, I don't think those will fit the Coupe.

What side skirts ??? TRD ones??? I don't see why they wouldn't since coupe/hatch/vert has same mid section body . The SS side skirts swap back n forth so don't see why these wouldn't

Im 90% sure the OEM side skirts are different lengths for a Hatch and a convertable.
Perhaps they do fit the couple, but I thought the coupe and vert were the same.

so ur point is??

The skirts can be modified to fit a convertible. It's not a direct fit but it's no huge modification either.

Just looking out for someone who things these will fit perfect on a convertable without modification

[placham]

FYI, I don't think those will fit the Coupe.

What side skirts ??? TRD ones??? I don't see why they wouldn't since coupe/hatch/vert has same mid section body . The SS side skirts swap back n forth so don't see why these wouldn't

Im 90% sure the OEM side skirts are different lengths for a Hatch and a convertable.
Perhaps they do fit the couple, but I thought the coupe and vert were the same.

so ur point is??

The skirts can be modified to fit a convertible. It's not a direct fit but it's no huge modification either.

Just looking out for someone who things these will fit perfect on a convertable without modification

Can we just leave it at that, no reason to beat old horse to death, Im sure who ever would be thinking bout spending coin on skirts would be more than informed about what their buying and I did disclose my concern about fitment when I posted them, right? But thanks for free bump.

***Im gonna try to clean this thread up. of items still for sale and remove pics of thing sold and no longer available. No reason to start new thread.

richee3 thanks for chiming in on skirts

[CelicaRacer97]

is the single DIN factory storage box with lid and black TRD rears available??? I'm located in cali 90715.

[placham]

is the single DIN factory storage box with lid and black TRD rears available??? I'm located in cali 90715.

Yes Single Din oem box with brackets still here and rear TRD valances (tried on my hatch didnt line up so their for coupe 6gc) still here.....

Sold parts updated in first post,,,, Silver fronts TRD are sold only have red front left..

Matt

[Celica_St202]

The trim Around the radio / The radio fit within' i would like to own!!!! ! With space for a 2DIN radio Price with shipment to denmark.
7860

[placham]

The trim Around the radio / The radio fit within' i would like to own!!!! ! With space for a 2DIN radio Price with shipment to denmark.
7860

Radio bezel and storage pocket? I have no idea on shipping,,,,I could ship out from USA,, or I might be in Europe in bout 2 weeks so could ship locally.

[Celica_St202]

Do you have a price on the radio trim only the top part. Or do you have a tom's lip ?

[6gCelicaowner]

What parts do you still have??

[placham]

What parts do you still have??

So far..all I have left........

TRD valances blk rear (coupe only)
TRD valances red front
TRD side skirt white
SS side skirts
Kouki Tails
Fog lamps x2 for facelift and switch
Jdm Power folding mirrors and switch
6th gen floor mats
HKS hard pipe intake no filter for St205 3sgte
Stock exhaust from my GT 5sfe
wheels pulled off see pics
ECUs
misc interior pieces
St215 top mount intercooler

I have someone coming by to look/buy TRD skirts over weekend,, so possibly those will be next to go.

Thats all I remember I have left

[djgeo05]

Would you happen to have a shifter boot?