![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Feb 14, '09 From Mid West Currently Offline Reputation: 7 (100%) ![]() |
So we had a lil bit of rain. My passenger side hi-beam is 1/2 full of water!!..
![]() Removing bumper is NOT going to happen!! SO-- Can I drill a small hole for it to empty out then smear silicone over it to seal it, then peel it off if //when it happens again?.. ![]() I CAN use just the lows but it was great having hi's out on the country roads we drive to & from work making it way easier to see road verman & deer.. ![]() Yup I did a search & wish it were only condensation, but I am definitely NOT pulling the bumper cover!! I don't have the time to have it layed up again when I break stuff pulling it off!!!! !!!ALWAYS HAPPENS TO BE MY LUCK!!!.. ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) ![]() |
take out the headlight, drain the water, take out the bulb, and put it in the sun. then seal it.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
![]() ![]() |
Lo-Fi Version | Time is now: July 25th, 2025 - 4:15 PM |