DIY: Adjust height & Preload coilovers, YouTube Vid and Megans instructions Options

[ILoveMySilly97]

So I'm new to coilovers and I've been searching around for a forum on 6gc to help us who's new to coilovers. I didn't know we had to preload them until a friend told me. I was clueless. But yea. Just wanted to share this video. It does a good job explaining how to preload and adjust the heights. He also explains which locking nut to spin to adjust height and adjust preload. I'm anxious for my Megans to come in already. XD

http://www.youtube.com/watch?v=Dc1u2_SwiLo

This is directly from the Megan website that I'm going to be following for my Megan coilover.
Preload:http://www.meganracing.com/tech/installati...ring%20pre-load

Adjusting Height: http://www.meganracing.com/tech/installati...as%20been%20set

This post has been edited by ILoveMySilly97: Feb 1, 2013 - 7:41 PM

[pandakid]

i would never mess with the preload,you'll end up blowning them up

[ILoveMySilly97]

i would never mess with the preload,you'll end up blowning them up

Found the how to on their sites.

This post has been edited by ILoveMySilly97: Feb 1, 2013 - 7:40 PM

[pandakid]

i would never mess with the preload,you'll end up blowning them up

Found the how to on their sites.

well you can adjust them,but what alot of people who drift in my area that have megan/stance/godspeed ect recommend not to mess because if they are off,it will put stress on that one side.I just perfer that peice of mind knowing the preload is set .