Just ordered a 20V Blacktop what parts do i need Options

[onnaj]

Hello,

I've ordered a 4AGE 20V Blacktop engine today with about 98.000 km! Can't wait to have it here! It comes with the aircon pump, steering pump, waterpump, oil pump, alternator, plug wires, intake, exhaust header. The distributor cap is damaged, so can't use that one.

Besides that i've bought a uncut wiring harness and 6 speed manual ecu from a friendly guy from club4ag.com.

What do i all need to make the swap complete? I use my own C52 7AFE gearbox, think it can handle the ponies without problems This is my list thusfar:

1) Igniter and ignition coil
2) Timing and other belts and valve cover gasket (and maybe waterpump)? Thinking also of chaning to the ST oil pump, so i can use the ST tensioner, belt and waterpump because the hydraulic one on the BT fail sometimes. And ive heard BT is an interference engine, so i don't want that to happen.
3) Do the wiring
4) Get a distributor cap and rotor also i guess
5) Order the fluids
6) Change the clutch?
7) Change the plugs
8) ......

Hope you guys can help me out so i have all the parts needed

Thanks a lot!!

[soulshadow]

A new clutch and flywheel since the ones that come with it are usually beat.
A 5SFE throttle cable, because the 7A is way too short and it will never reach.
The rest is up to you, if you want to run Open ITB or turbo. A manifold for turbo off ebay is pretty decent and Velocity Stacks from Techno Toy Tuning is also better than the plastic intake manifold box.
Some Uni Velocity stack filters for ITB.
New motor mounts if yours are shot.
This is the perfect time to do any suspension work, cleanups, ect.