 beams swap help!, beams |
 Feb 24, 2013 - 1:30 PM
|
 
|
|
Enthusiast Joined Feb 24, '13 From usa Currently Offline Reputation: 0 (0%)  |
I need help with beams swap! what diameter downpipe do is needed, will the intake air filter system swap over. will the tubes from the radiator swap out as well? any help would be much appreciated.
|
 |
Replies
|
Feb 24, 2013 - 2:50 PM
|
|
 Enthusiast  Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
from what it seems you are jumping the gun without actually having any idea what the swap may entail. I suggest you read the threads that detail this swap. to answer your questions
every clip or engine you buy should come with the intake air filter and the exhaust manifold and b- pipe. otherwise dont buy the engine, or youll be screwed. a missing part will give you headaches, and will be hard to find. -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Feb 24, 2013 - 3:50 PM
|
|
|
Enthusiast Joined Feb 24, '13 From usa Currently Offline Reputation: 0 (0%) |
QUOTE (njccmd2002 @ Feb 24, 2013 - 3:50 PM)  from what it seems you are jumping the gun without actually having any idea what the swap may entail. I suggest you read the threads that detail this swap. to answer your questions every clip or engine you buy should come with the intake air filter and the exhaust manifold and b- pipe. otherwise dont buy the engine, or youll be screwed. a missing part will give you headaches, and will be hard to find. I'm talking about the air intake I have an aem cold air intake would that fit and it doesn't come with the downpipe to flexpipe I need to know what is in diameter 2inch or 2.5inch |
|
Feb 24, 2013 - 6:26 PM
|
|
 Moderator Joined Jun 29, '08 From Denver Currently Online Reputation: 59 (100%) |
QUOTE (williamh093 @ Feb 24, 2013 - 2:50 PM) I'm talking about the air intake I have an aem cold air intake would that fit and it doesn't come with the downpipe to flexpipe I need to know what is in diameter 2inch or 2.5inch He knows what you are asking about, and he gave the best answer he could possibly have given. The BEAMS swap is as easy as a swap gets and there's plenty of information on the forums about it, but if you're asking a question as simple as intake compatibility then you'll have serious issues with the swap. I'm not trying to be a jerk, but seriously, the intake is pretty common information on the BEAMS. To answer your question- no, your AEM intake will be scrap when the 5S comes out. 2.5" piping for the B pipe. An exhaust shop can fab up a B pipe for you, but getting the factory B pipe would have been easier and the BEAMS will not even start with a proper intake, and the factory intake is by far the best intake for it. Again, not trying to be a jerk. I know it sounds like I am, but without knowing which intake will work, a BEAMS swap will not come together. You'll definitely want to give these threads a few good reads. njccmd2002- "I Swapped 3s-ge Redtop Into '97 Limited Edition Vert." turnip- "Swap: 3sge Beams into 94 GT" hurley97/Batman722- "New Addition to Our Family" erahman85- "One acronym... BEAMS" This post has been edited by richee3: Feb 24, 2013 - 6:39 PM -------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
Posts in this topic
williamh093 beams swap help! Feb 24, 2013 - 1:30 PM
njccmd2002 Your arm intake will make a Great Wall decoration,... Feb 24, 2013 - 10:44 PM
williamh093 QUOTE (njccmd2002 @ Feb 24, 2013 - 10... Feb 25, 2013 - 9:32 PM williamh093 QUOTE (williamh093 @ Feb 25, 2013 - 10... Mar 3, 2013 - 12:16 AM richee3 The MAF is the end-all and be-all on the BEAMS. It... Mar 3, 2013 - 10:15 AM williamh093 QUOTE (richee3 @ Mar 3, 2013 - 11:15... Mar 3, 2013 - 11:46 AM williamh093 QUOTE (williamh093 @ Mar 3, 2013 - 12... Mar 3, 2013 - 12:11 PM kurt95gt You might be able to use a air box for the 97-01 C... Mar 3, 2013 - 11:45 AM richee3 QUOTE (kurt95gt @ Mar 3, 2013 - 10:4... Mar 3, 2013 - 1:27 PM Smaay QUOTE (richee3 @ Mar 3, 2013 - 11:27... Apr 11, 2013 - 12:46 PM kurt95gt Ahh.....well guess that won't work. Mar 3, 2013 - 5:37 PM williamh093 QUOTE (kurt95gt @ Mar 3, 2013 - 6:37... Mar 4, 2013 - 2:08 PM njccmd2002 i wasted my money with the oem camry intake.... it... Mar 6, 2013 - 2:14 PM njccmd2002 http://www.ebay.com/itm/JDM-98-99-SSIII-6-...4b7... Mar 6, 2013 - 10:59 PM njccmd2002 for reference camry intake... Mar 8, 2013 - 12:36 PM williamh093 Need a pinout diagram for beams swap any help will... Apr 11, 2013 - 12:40 PM richee3 What are you stuck on? You don't need the enti... Apr 11, 2013 - 12:45 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 21st, 2025 - 6:56 PM |