 FS: If you guys want these?, Strut Braces for Front and Rear |
 Mar 1, 2004 - 5:04 PM
|
 
|
 Enthusiast  Joined Jun 21, '03 From Pennsylvania Currently Offline Reputation: 3 (100%)  |
Ok guys,
this is what has been going on. A few of you guys have been asking me to make some things (especially "strut bars"). Well, I think i have a plan? I would like to know how many people would deffinetly be in for me making a bounch of these! I have made a rear strut bar "as a prototype" (look on my profile for pics) and since it turned out really well, I am willing to make some of these for other 6gc members! The bars will fit both the GT and ST since body types are the same. I have not yet made a front bar yet, but i am sure i can... since it should be similar but would just use more material and cost a little more. I will be making a front bar in the next few days and it will be a "3 point brace" like the really expensive ones that cost over $300. Depending on the amount of people that are serious about this.... the price will drop for the more people that want these braces! Prices will be: front bar price will be $130 including shipping rear brace will be $100 including shipping only people that have $ and are serious should reply to this post!!!! This is for all you guys who want "good solid strut braces" but dont want to spend tons of $ on them! DG --------------------  |
 |
Replies
|
Mar 1, 2004 - 5:19 PM
|
|
|
Enthusiast Joined Jun 21, '03 From Pennsylvania Currently Offline Reputation: 3 (100%) |
matt,
i just looked at the rear jspeed 3point brace.... it looks like i can make that. I just got to go and look at my car to see how that mounts! update: i just looked at that and there is no place to mount the bottom! looks like the jspeed rear makes you drill into the floor and mount it??? thanks, dg This post has been edited by DG_Performance: Mar 1, 2004 - 5:52 PM -------------------- |
Posts in this topic
DG_Performance FS: If you guys want these? Mar 1, 2004 - 5:04 PM
jdm94gt Hows it goin man?
Is there any possibililty of pro... Mar 1, 2004 - 5:13 PM orvillescelica i would definatly be interested in a 3 pt front st... Mar 1, 2004 - 5:25 PM BigEdge169 I'm the same as Orville, I'm very interest... Mar 1, 2004 - 5:34 PM Hym3n I'm a moron, but I've got a question. What... Mar 1, 2004 - 6:31 PM Sev408 i would take a front strut brace when you get them... Mar 1, 2004 - 7:17 PM kamax once you get a prototype of the front brace. I wi... Mar 1, 2004 - 8:24 PM LatinKraze I'm down with a purchase of both.
Some one g... Mar 1, 2004 - 8:27 PM FastLane95GT i'd probably be in, just would like some pictu... Mar 1, 2004 - 8:46 PM DG_Performance I will put pics of the front brace on my profile w... Mar 1, 2004 - 11:32 PM Jabberwock Dude, you know I am in since I have been bugging y... Mar 2, 2004 - 1:54 AM Raek yup...i'm in. Mar 2, 2004 - 8:24 AM subsolo_21 If ur still making the front braces this summer I... Mar 2, 2004 - 1:12 PM abatardi OH HELL YES.
Would like to see pictures of the ... Mar 2, 2004 - 6:31 PM RedSunCelica I am in for both front and rear.
PM or email me wh... Mar 2, 2004 - 6:46 PM DG_Performance I have the jig made and ready to go for making the... Mar 2, 2004 - 7:41 PM yep I'd be interested once you figure it all out. Mar 2, 2004 - 7:51 PM ghostdog I'd be down for a 2-point bar, provided of cou... Mar 2, 2004 - 7:54 PM LatinKraze Wow Mar 2, 2004 - 8:05 PM PhillyGuy086 doesn't the 3 point rear brace bolt onto the m... Mar 2, 2004 - 9:46 PM FallenHero I'll have to see pics, but I'd be down for... Mar 2, 2004 - 11:37 PM Exile04 hey i would be down. first tho is a 3point front c... Mar 3, 2004 - 12:30 AM 94silverst I'm in for the front! Mar 3, 2004 - 12:50 PM CJOHNST3 I'd be in for the fronts Mar 3, 2004 - 9:44 PM aaronc222 QUOTE (DG_Performance @ Mar 1, 2004 - 3:19 PM) mat... Mar 3, 2004 - 10:30 PM DG_Performance ok well if that is where it mounts i can fab somet... Mar 4, 2004 - 7:51 AM aaronc222 Given a price to work for, I can have the money in... Mar 4, 2004 - 3:13 PM DG_Performance Ok, when you are ready to get one just let me know... Mar 4, 2004 - 4:01 PM FallenHero How about my custom front bar??? Mar 4, 2004 - 11:50 PM DG_Performance what is custom about the front bar that you want??... Mar 5, 2004 - 7:59 AM FallenHero Well, I have an aftermarket cruise set up on my ca... Mar 5, 2004 - 12:00 PM DG_Performance ok guys,
fabrication on the front braces has start... Mar 5, 2004 - 3:51 PM BigEdge169 I'd be in for a 3 point front.
I sent you a P... Mar 5, 2004 - 5:37 PM DG_Performance Ok guys, have a look!
the first prototype 3 po... Mar 6, 2004 - 6:18 PM orvillescelica Nice work DG!! it looks great! I was w... Mar 6, 2004 - 11:50 PM DG_Performance well,
the braces are hollow to save on weight, bu... Mar 7, 2004 - 2:43 AM DG_Performance ok, well i got the (fixture/jig) ready to go so i ... Mar 7, 2004 - 5:57 PM CJOHNST3 What is the cost? Mar 7, 2004 - 6:50 PM BigEdge169 QUOTE (DG_Performance @ Mar 1, 2004 - 4:04 PM) Pri... Mar 8, 2004 - 8:47 AM abatardi eh, crap. I just looked at the design and there... Mar 8, 2004 - 12:15 PM DG_Performance Look for a modified bar in a little while..... I a... Mar 8, 2004 - 2:20 PM Raek sent my money...
am i the first? Mar 9, 2004 - 1:20 PM DG_Performance Got the $......
Will ship out the brace tomor... Mar 9, 2004 - 6:40 PM DG_Performance Updates: The 3 point brace will not fit the ST... Mar 12, 2004 - 2:13 PM CDNSLEEKA These braces look great will be a great addition t... Mar 14, 2004 - 8:37 PM DG_Performance I do have a jig made and can make them any time. ... Mar 17, 2004 - 9:31 AM doGGy RE: FS: If you guys want these? Mar 17, 2004 - 9:34 AM Raek i got mine yesterday, but it's waaaaay too sno... Mar 18, 2004 - 8:03 AM DG_Performance you are welcome raek!!!
thank you... Mar 19, 2004 - 2:57 PM Supersprynt cough, stuff for coupes, cough. Mar 19, 2004 - 3:01 PM orvillescelica I dont see why the front braces wouldnt fit the co... Mar 19, 2004 - 6:50 PM ghostdog QUOTE (orvillescelica @ Mar 19, 2004 - 6:50 PM) I ... Mar 19, 2004 - 6:59 PM DG_Performance i thought i mentioned b4 that the front of the car... Mar 19, 2004 - 8:13 PM XXX_Mina I have a celica ST with a 3sgte... how is it that ... Mar 20, 2004 - 3:08 AM DG_Performance I am goint to see if i can come up with a special ... Mar 26, 2004 - 1:40 PM DG_Performance Hey guys!
I got a Rear Strut bar (normal thick... Apr 10, 2004 - 12:48 PM Cormudgen QUOTE (DG_Performance @ Apr 10, 2004 - 10:48 AM) H... Apr 10, 2004 - 1:56 PM Cormudgen QUOTE (DG_Performance @ Apr 10, 2004 - 10:48 AM) H... Apr 10, 2004 - 1:58 PM Akuza hey whats the front strut bar in the wheel well fo... Apr 10, 2004 - 5:16 PM jgreening QUOTE Look for a modified bar in a little while...... May 1, 2004 - 1:21 AM DG_Performance Cormudgen, I just noticed you are interested in t... May 2, 2004 - 9:04 AM Jeremy1210 About your side tower bar, how hard in the install... May 2, 2004 - 12:08 PM DG_Performance I would recomend that you just take the fenders of... May 2, 2004 - 9:58 PM celicarocker the fenders are easy to take off guys, i did it...... May 2, 2004 - 10:11 PM
shid BUMP! this needed to be bumped before it got l... Oct 13, 2004 - 10:17 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 4th, 2025 - 7:27 PM |