how to instal TRD rear wing, I NEED thoto Options

[Lexa666]

Recently put TRD spoiler
disadvantages:
1-mount.
studs instead of bolts.
2 M8 threaded studs and the holes in the lid 5-6.
3-one opening coincided, the second not. I had to make one more hole.
4 on the back of the lid have to cut a piece of metal to tighten two screws.
5-side panel to fit snugly inside. If the gap.

I need a picture, who is established
1 -
2 -
3 -
4 photos as done
5 is firmly prilegaet.Foto

Done in a hurry, because cover should be changed.
When looking to buy a new one. I want to do this carefully, because changing that restayl (a lot of extra holes), but not heated.

[richee3]

I think he's trying to install the TRD wing and is having difficulty. He's asking for pictures and a how-to. I think he specifically needs pictures of #4 and #5.

Edit: I see the issue. You had a Euro two post wing, which mounts slightly differently from the TRD wing. Only the rear holes line up, so you had to drill the front holes. As for the rest of the issues, does the base of the TRD wing not sit flat against your trunk lid? It might be that you have a TRD wing for a coupe or Curren instead of a liftback wing.

This post has been edited by richee3: Apr 5, 2013 - 1:28 PM

[Lexa666]

I think he's trying to install the TRD wing and is having difficulty. He's asking for pictures and a how-to. I think he specifically needs pictures of #4 and #5.

Edit: I see the issue. You had a Euro two post wing, which mounts slightly differently from the TRD wing. Only the rear holes line up, so you had to drill the front holes. As for the rest of the issues, does the base of the TRD wing not sit flat against your trunk lid? It might be that you have a TRD wing for a coupe or Curren instead of a liftback wing.

Yes, that's right
My rear fender 100% ST202, removed from the 6th gen, for liftback(non curren or supra)